After tinkering with Setup 1.30 for the past 2 days, I have found that my eGPU isn't detected when I run Setup 1.3 now. When I go into Windows 7, it isn't even detected there anymore even after disabling my dGPU & uninstalling it. I have tried: -Suggested steps Setup 1.30 gives in failure to detect eGPU -Disable -> Uninstall dGPU & reboot Specs: NB: MSI GE60 0NC OS: Win7 Adapter: PE4C v3.0 mPCIE iGPU: Intel HD 4000 dGPU: GeForce GT 650M eGPU: MSI GTX 970 PSU: EVGA Supernova 1000W P2 (probably overkill, but I ordered a 750W one and they shipped this one instead so I got lucky) Other Problems: -After disabling and uninstalling my dGPU, my reboot automatically reinstalls the software/drivers for the dGPU. Possible fix would be in a flashed BIOS? I have looked into flashed BIOS for GE60 0NC, but the only one that came up was Prema's OC BIOS. Would that BIOS be sufficient? -eGPU not detected in Windows 7 anymore. Before I had Setup 1.30, it would appear in my Device Manager with either Error 12 or 43, but now it doesn't even exist. -eGPU only turns on during black screens or after putting my laptop to sleep and loading up windows again. Is this a common occurrence? My current delay switch setup on my PE4C v3.0 is set to SW1: 2 and SW2: 2 because the eGPU doesn't turn on when they are set to 1 or 3. Current Steps Done: -DSDT Override successful