Jump to content

Verga

Registered User
  • Posts

    3
  • Joined

  • Last visited

About Verga

  • Birthday 02/18/1984

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Verga's Achievements

Curious Beginner

Curious Beginner (1/7)

10

Reputation

  1. RAID Options - Atonus confirms the RAID0 option works. There are others there too: 0x70921 Setting: RAID0, Variable: 0x19D {05 A6 D7 01 D8 01 BE 01 02 00 9D 01 10 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00} 0x70947 Option: Disabled, Value: 0x0 {09 0E C0 03 30 00 00 00 00 00 00 00 00 00} 0x70955 Option: Enabled, Value: 0x1 {09 0E BF 03 00 00 01 00 00 00 00 00 00 00} 0x70963 End of Options {29 02} 0x70965 Setting: RAID1, Variable: 0x19E {05 A6 D9 01 DA 01 BF 01 02 00 9E 01 10 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00} 0x7098B Option: Disabled, Value: 0x0 {09 0E C0 03 30 00 00 00 00 00 00 00 00 00} 0x70999 Option: Enabled, Value: 0x1 {09 0E BF 03 00 00 01 00 00 00 00 00 00 00} 0x709A7 End of Options {29 02} 0x709A9 Setting: RAID10, Variable: 0x19F {05 A6 DB 01 DC 01 C0 01 02 00 9F 01 10 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00} 0x709CF Option: Disabled, Value: 0x0 {09 0E C0 03 30 00 00 00 00 00 00 00 00 00} 0x709DD Option: Enabled, Value: 0x1 {09 0E BF 03 00 00 01 00 00 00 00 00 00 00} 0x709EB End of Options {29 02} 0x709ED Setting: RAID5, Variable: 0x1A0 {05 A6 DD 01 DE 01 C1 01 02 00 A0 01 10 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00} 0x70A13 Option: Disabled, Value: 0x0 {09 0E C0 03 30 00 00 00 00 00 00 00 00 00} 0x70A21 Option: Enabled, Value: 0x1 {09 0E BF 03 00 00 01 00 00 00 00 00 00 00} 0x70A2F End of Options {29 02} 0x70A31 Setting: Intel Rapid Recovery Technology, Variable: 0x1A1 {05 A6 DF 01 E0 01 C2 01 02 00 A1 01 10 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00} 0x70A57 Option: Disabled, Value: 0x0 {09 0E C0 03 00 00 00 00 00 00 00 00 00 00} 0x70A65 Option: Enabled, Value: 0x1 {09 0E BF 03 30 00 01 00 00 00 00 00 00 00} 0x70A73 End of Options {29 02} Expresscard slot - eGPU options After various flash tinkerings, my EC slot is now running in Gen2 link speed mode for either A.02 or A.07 BIOS. I previously suggested only A.02 would enable it at Gen2 speed. Can a E6440 owner with an eGPU check this with their A.07 system to confirm if theirs is being limited to Gen1 speed rather than AUTO or Gen2? 0x6E635 Setting: PCI Express Root Port 7, Variable: 0x85 {05 A6 B8 02 BA 02 40 01 02 00 85 00 10 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00} 0x6E65B Option: Disabled, Value: 0x0 {09 0E C0 03 00 00 00 00 00 00 00 00 00 00} 0x6E669 Option: Enabled, Value: 0x1 {09 0E BF 03 30 00 01 00 00 00 00 00 00 00} 0x6E677 End of Options {29 02} 0x6E9EF Setting: PCIe Speed, Variable: 0xF5 {05 A6 D7 02 D8 02 4D 01 02 00 F5 00 10 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00} 0x6EA15 Option: Auto, Value: 0x0 {09 0E BD 03 30 00 00 00 00 00 00 00 00 00} 0x6EA23 Option: Gen1, Value: 0x1 {09 0E D9 02 00 00 01 00 00 00 00 00 00 00} 0x6EA31 Option: Gen2, Value: 0x2 {09 0E DA 02 00 00 02 00 00 00 00 00 00 00} 0x6EA3F End of Options {29 02} eGPU option - max TOLUD This setting will determine if the eGPU can be allocated in 32-bit PCI config space without needing to resort to any more complicated mods like a DSDT override. During my iGPU-only equipped E6440 eGPU implementation, the Dynamic setting would decrease TOLUD to 3.25GB. dGPU-equipped E6440 systems would need that to be 3.0GB or less to host the eGPU. Does the BIOS do that? If not, may need to manually set it lower to say 2.5GB. A low value like that is fine. Only issue is with 32-bit OS which would see 1.5GB of system RAM wasted by such a low setting. 0x7481A Setting: Max TOLUD, Variable: 0x275 {05 A6 1E 05 1F 05 8B 02 02 00 75 02 10 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00} 0x74840 Option: Dynamic, Value: 0x0 {09 0E 20 05 30 00 00 00 00 00 00 00 00 00} 0x7484E Option: 1 GB, Value: 0x3 {09 0E 2A 05 00 00 03 00 00 00 00 00 00 00} 0x7485C Option: 1.25 GB, Value: 0x4 {09 0E 29 05 00 00 04 00 00 00 00 00 00 00} 0x7486A Option: 1.5 GB, Value: 0x5 {09 0E 28 05 00 00 05 00 00 00 00 00 00 00} 0x74878 Option: 1.75 GB, Value: 0x6 {09 0E 27 05 00 00 06 00 00 00 00 00 00 00} 0x74886 Option: 2 GB, Value: 0x7 {09 0E 26 05 00 00 07 00 00 00 00 00 00 00} 0x74894 Option: 2.25 GB, Value: 0x8 {09 0E 25 05 00 00 08 00 00 00 00 00 00 00} 0x748A2 Option: 2.5 GB, Value: 0x9 {09 0E 24 05 00 00 09 00 00 00 00 00 00 00} 0x748B0 Option: 2.75 GB, Value: 0xA {09 0E 23 05 00 00 0A 00 00 00 00 00 00 00} 0x748BE Option: 3 GB, Value: 0xB {09 0E 22 05 00 00 0B 00 00 00 00 00 00 00} 0x748CC Option: 3.25 GB, Value: 0xC {09 0E 21 05 00 00 0C 00 00 00 00 00 00 00} 0x748DA End of Options {29 02} Disable dGPU for eGPU use? NVidia Optimus will only activate if there is no other AMD or NVidia dGPU detected. Usually we use the Setup 1.30 software to disable dGPUs, but it looks like it's possible to do as a UEFI variable write: 0x72F20 Setting: Always Enable PEG, Variable: 0x209 {05 A6 F6 05 F7 05 33 02 02 00 09 02 10 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00} 0x72F46 Option: Disabled, Value: 0x2 {09 0E C0 03 00 00 02 00 00 00 00 00 00 00} 0x72F54 Option: Enabled, Value: 0x1 {09 0E BF 03 00 00 01 00 00 00 00 00 00 00} 0x72F62 Option: Auto, Value: 0x0 {09 0E BD 03 30 00 00 00 00 00 00 00 00 00} 0x72F70 End of Options {29 02} Tech Inferno Fan, did you manage to disable the dGPU using UEFI variables? This is what my extract from E6530A16.exe looks like. Do you know what to modify to disable dGPU? 0x5F915 Setting: Always Enable PEG, Variable: 0x187 {05 A6 4D 03 4E 03 85 01 02 00 87 01 10 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00} 0x5F93B Option: Disabled, Value: 0x2 {09 0E C1 02 00 00 02 00 00 00 00 00 00 00} 0x5F949 Option: Enabled, Value: 0x1 {09 0E C0 02 00 00 01 00 00 00 00 00 00 00} 0x5F957 Option: Auto, Value: 0x0 {09 0E BE 02 30 00 00 00 00 00 00 00 00 00} 0x5F965 End of Options {29 02}
  2. Tech Inferno Fan, you wrote in an earlier post the follwoing; Disable dGPU for eGPU use? NVidia Optimus will only activate if there is no other AMD or NVidia dGPU detected. Usually we use the Setup 1.30 software to disable dGPUs, but it looks like it's possible to do as a UEFI variable write:Spoiler 0x72F20 Setting: Always Enable PEG, Variable: 0x209 {05 A6 F6 05 F7 05 33 02 02 00 09 02 10 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00} 0x72F46 Option: Disabled, Value: 0x2 {09 0E C0 03 00 00 02 00 00 00 00 00 00 00} 0x72F54 Option: Enabled, Value: 0x1 {09 0E BF 03 00 00 01 00 00 00 00 00 00 00} 0x72F62 Option: Auto, Value: 0x0 {09 0E BD 03 30 00 00 00 00 00 00 00 00 00} 0x72F70 End of Options {29 02} I extracted the same information from E6530A16.exe and found the following as default values; 0x5F915 Setting: Always Enable PEG, Variable: 0x187 {05 A6 4D 03 4E 03 85 01 02 00 87 01 10 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00} 0x5F93B Option: Disabled, Value: 0x2 {09 0E C1 02 00 00 02 00 00 00 00 00 00 00} 0x5F949 Option: Enabled, Value: 0x1 {09 0E C0 02 00 00 01 00 00 00 00 00 00 00} 0x5F957 Option: Auto, Value: 0x0 {09 0E BE 02 30 00 00 00 00 00 00 00 00 00} 0x5F965 End of Options {29 02} Do you know which values i should modify to disable the dGPU?
  3. Hi, I'm trying to set up a rig with the following components were the eGPU is powering the internal LCD. DELL Latitude E6530 BIOS A16 i7 3520M 16 Gbyte ram Intel HD Graphics 4000 (driver version 15.33.32.64.4061) NVIDIA NVS 5200M (driver version 347.88) EXP GDC Beast, CTD Off, PTD Off, connected with Expresscard NVIDIA GeForce GTX 770 (driver version 347.88) Windows 7 64bit OCZ 600W external PSU So far all three GPU's are detected by Device Manager in Windows, but only if i boot with eGPU connected. eGPU is running at PCI-E x1 1.1 according to GPU-Z. I can only access NVIDIA control panel if i have an external LCD connected to my eGPU and I can't get the eGPU to power my internal LCD even if the external LCD is unplugged. In 3DMark Vantage i have about 100 FPS on external LCD and about 10 FPS on internal LCD. Any suggestions how to solve this problem? 3DMark Vantage Graphic Score 29563 on external LCD NVIDIA GeForce GTX 770 video card benchmark result - Intel Core i7-3520M,Dell Inc. 07Y85M Update: By using DIY eGPU Setup 1.30 i managed to disable dGPU and feed the internal LCD with my eGPU. i'm also running my eGPU at PCI-E x1 2.0 now. Settings in startup.bat call speedup lbacache call iport reset 1 call iport gen2 1 call iport dGPU off :end call chainload bootmgr noremap 3DMark Vantage Graphic Score 18210 on internal LCD NVIDIA GeForce GTX 770 video card benchmark result - Intel Core i7-3520M,Dell Inc. 07Y85M
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.