Sniegu

Hi Prema, have u made VBIOS for 980m away 15 with same cpu? Thanks! Wysłane z mojego SM-N9005 przy użyciu Tapatalka

hi with vbios i should use for Alienware 17 R2 970M 3 GB ? i have 4710HQ and 970M 3 GB , Can i use vbios for 970M 6GB?

Hi Guys! I have AW 17 R2 atm . I cannot find anything about Modified Vbios for 970M 3GB ? Thanks a lot Guys for any reply.

is this will work with my 970m 3 gb alienware 17 r2? thanks

Hi. Problem resolved. It was modified driver issue. I have download Mr.Fox driver mod 344.75 and all works fine now. BIG Thank You to Mr.Fox :-)

i hope so . Atm playing on my 60 mhz screen hate it T_T . If anyone have backup of gtx 980M 8GB for Alienware will be really nice if i can have copy:) . Thanks

It's alienware card I order it from hidevolution

I flash without doing backup....

well i dont think so . yesterday was fine 100% it stop working when i upgrade card. How do i can check it??

no drivers needed . I have checked monitor and cable works fine with my second Laptop with is AW 13.... Also it was fine before i upgrade from 780m to 980m . no reaction when cable pluged to mini dp port but works with hdmi . Hdmi give's only 60mhz and mini display port 120mhz . anyone have similiar problem?? i have reinstall drivers and no difference

i have just flashed card !!! problem was when i type command and press enter it takes about 5 min to flash card . I remeber when i flash my 780m in dos it was just 1 min . So when i was flashinh my 980m i was waiting only 2 min not longer then that (stupid:D) . Right now everything works fine just checked nvidia inspector and it shows modfied bios stock clock 1202 mhz . one done another problem comes lol . I always have connected my external monitor 120mhz benq 2720t to my laptop but now when plug cable nothing happend....:/ not recognized my monitor at all also nvidia control panel have short option's to choose i cannot even find there resolution and mhz freshrate on there..... (sorry for english) .

my bios settings are : Windows 8 fast boot enabled Secure Boot Disabled Load Legacy Option Rom Disabled Bost list option UEFI I have keep trying flash card with no results . Device Menager Card 980m Disabled Folder c:\Rom\mnvflash 3 files plus 980m.rom Also with driver should be installed before flash card?? i have 344.75 atm but when play games core clock stay only at 540 mhz and dont go higher lol..... . If i install latest (but they block OC) Core Clock works fine 1038 mhz . I have spend 600£ for card and atm not happy at all . Forgot to mension about my system : Alienware 17 4910MQ GTX 980M 8GB model from HidEvolution US 16GB RAM msata 480 GB SSD Samsung Pro Evo 840 1TB SSD is all correct?? for flashing card?? Thanks

my romname is short 980.rom and iam using both files dll in same folder including rom aswell . when i try to flash sometimes comes up with error listed in previous post or sometimes its shows NVIDIA Firmware Update Utility <version 5.206=""> Simplified Version For OEM Only and nothing else happend i cannot even close this windows when i use version 5.196 from this post it always come's up with error unable to open nvflash driver.... . </version>

yes

Hi i have problem with flashing guide . I have flash in past 780m in dos without any problems . Atm i have new 980m 8gb and trying flash it in windows and i have this information when flashing mnvflash -6 romname.rom i get ERROR: Unable to open NVFLASH Driver <0x0000000005> GPU is disabled in Device Menager Please some1 help Thanks

I have setup up now everything correctly . all my temps dont go over 80 ) thanks

So what temp i should get in full load like gaming or benchmarks?? My Cpu 4940 get temp arround 77-83 its max when gaming or using bench's . Thanks

Hi Tanzmeister !!! Thanks for reply again! Yes i did please read below : I have load up Bios from ur link 5 and EC 5 when doing this in next page where i blue screen its saying something my chip is different and asking me if i want to replace it y or n . I dont know what to do in this step so i press n. Anyway i went to bios and it shows me bios ver 5 and EC 5 . Then i install also hot key from your last link . Restart PC and i have done Fire Strike test standard . My GPU1 Start with higher temp then GPU2 reach same temp on 70 c and after GPU2 get hot faster then GPU1 not much different about 5c on max temp with was GPU1 82 c and GPU2 85 this been maxed temp in fire strike . My question now is if those temp are fine ? in FireStrike Bench? and with GPU should have higher Temp? it should be the 1 GPU with higher temp or it dosnt matter? I have done small test in gaming i have run Battlefield 4 for hour and my GPU's Temps are in max GPU1 82 GPU2 89 when 89c been reached fans go auto faster drop temp to GPU1 to 82 and GPU2 85c then few minutes after temps back to 82 and 89 . When i press Fn+1 max speed fans temps are GPU 1 74c and GPU 2 80c so i belive its something to do with GPU2 but need some advice what else i can do?? Swaping the card may help? 82c on GPU1 in gaming is acceptable in my opinion (GTX 880M) but 89c is to high and i dont want brick my card:/ . Any more sugestions?

Idle temps arr fine 40 on each GPU but when use benchmarks or gaming for let say 1h my temps on GPU one is arround 80 and GPU 2 is arround 90c .

i have update bios to 7 and ec to 6 but i have notice now my temps for gpu are different?? gpu1 get in bench 75-80 and gpu2 about 10-15 c more

Bios version 1.03.06 , KBC/EC 1.03.02 and Hot key 8.0134 Also i have install now HWiNFO and my idle temp's for CPU minimum 45 , average 48 and GPU minimum 32 average 37

I am using Windows 8.1 pro bios I'll check later on when back home. Maybe stupid question but what is EC?

i use stock Bios and i have now use modified bios for gtx 880m both cards are running stock 993 mhz core . Cpu is not overclocked at all . Hotkey version i use 8.0134 but in this software i cannot change touchpad colour on my p375sm-a

I haven't oc it at all those temp are stock

Yes all stock I haven't touch anything yet. Idle Temp CPU are 45C and GPU 35-40 I have use high temperature tape to seal gap between fan and radiator and temp are arround 80c on cpu and gpu's and this is on automatic speed fan but when i use Fn+1 100% fan speed temp go down to 75 on both. Is it safe to keep using fan's at 100% when gaming? it can be stupid question but iam still learning .