Jump to content

jtg

Registered User
  • Posts

    12
  • Joined

  • Last visited

About jtg

  • Birthday 08/22/1960

jtg's Achievements

Settling In

Settling In (2/7)

11

Reputation

  1. Here are my images from modding: :aluminum foils Enzotech BMR-C1 Idle And here are the rest of the images: PCH Modd Enzotech BMR-C1 All I need. The screws for the 980m for the heatsink.One of them is lost to me. Since I had to reorder some. size: M1,6 X 3 mm (0,06 X 0,12 inch) Notebook Cooler Aeolus Pure It's missing the backplate mod - which is yet to come! Very important - note downforce at GPU and CPU heatsink. With GPU in particular. When the CPU is not too much pressure, otherwise the CPU takes damage. I do not take responsibility for others !!! It also lacks the small aluminum heatsink (height 3 mm) for the CPU. Which are still delivered. Then I'll make another pure image. And then still lacking temperatures of Furmark. Will I even replacement delivery. It ´s a dream - it´s a CLevo!!!!!!!!!!!! Clevo P375sm i7 4940mx - 24 GB Corsair 1600 - mSata Toshiba 128 GB - 512 GB Samsung Pro 840 - 500 GB HDD - 2 X 980m SLI - CPU Liquid Ultra - GPU´s Prolimatech PK 3 - 120 HZ Display LG xxxx - Pure Aeolus Notebook Cooler RAM Cook Copper - Enzotech BMR C1 - Windows 7 64 Bit
  2. Hello, thank you so much for the super mods here. I am now the proud Taken Hallows a P375sm-a and have the mods almost all implemented in my notebook. What I lack - is the backplate edit or completely replace by a perforated metal grille. My temperatures in the stress test under XTU 4940mx 71 degrees Celsius. Since I have to repair. It also still missing 3 mm high heatsink on the heatsink of the CPU. The there are unfortunately only from ALU. As soon as I put it, the small copper heat sink - the notebook runs down after logging in. I guess times that press the small copper cooler on the heatsink and lead to the shutting down the notebook a certain reason. Finally, the small copper radiator are 2 mm above the heatsink. And then I wanted to undervolt the CPU. Then one probably should. 5-10 degrees Celsius be less there. I hope so. The GPUs (980m) I must also repair. As I have previously only available on the slave, the small copper cooler. I have also ordered higher copper cooler. Let's see how the temperatures then under Prime, Furmark, inter alia, his will. 1) film Mod 2) WLP exchange new Prolimatech PK3 GPUs and CPU with Liquid Ultra 3) small copper cooler 4) PCH-Mod copper cooler on it Increased 5) pressure on GPUs 6) Notebook cooler Aeolus Pure 7) CPU Undervolt not yet implemented 8) other higher copper radiator best not yet been implemented on GPUs 9) backplate cut circular saw me or replace completely against perforated grille 10) Small aluminum heatsink on the CPU Heatsink Thanks again for this !!!
  3. I would like a good case which is heat moderately well balanced. An open BIOS. No fixed soldered CPU. 120 HZ display.
  4. jtg

    IMAGINE: NEW Clevo Models

    Hello. There is a new type of P37x series. In the Prostar P379SM is offered. Sorry for my English. I am a German child. Here is the link: https://www.pro-star.com/index.php?r=product/configure&model=P379SM-AS And it is 120Hz.
  5. Almost correct! But! Look here: BullMan E-Klasse Grand Xeon 17FHD There you can even Xeon - Processors Install !!!
  6. jtg

    IMAGINE: NEW Clevo Models

    Hello. In the Netherlands there are a reseller who sells the P375sm-a 120Hz screen quality of LG. XNOTEBOOKS® CYCLONE HW17 - 2 x ATI RADEON R9 M290X (Crossfire ) / 2 x NVIDIA GTX860 (SLi) / 2 x NVIDIA GTX880 (SLi) / 2 x GTX970 (SLi) / 2 x GTX980 (SLi) / 1 x QUADRO K5100 SUPER Gaming / Multimedia laptop notebook, verlicht toetsenbord P370SM-A P375
  7. Read along interesting here. The tips you get here then you can even implement. The grille of "sl44n3sh" has me personally but to large holes. There are perforated sheet with much smaller holes. But have to search long after.
  8. Google translator for the following page: MSI prepara un kit para actualizar sus porttiles GT72 con la nueva GTX 980M | Noticias de Tecnologa | HispaZone.com Interesting! GT72 user is offered an upgrade kit. GT70 users are not considered.
  9. The first benchmarks show clearly yes, it works, Maxwell technology. Let's see if nvidia just gets more shading units next year the 980m? And the nvidia then sold as 980m ti?
  10. I would also like a geforce 980m in my GT70 Dominator Pro. But according to MSI will not do. That's all about a new VBIOS and BIOS - or works, the change from Kepler to Maxwell too? Taking account of the TDP.
  11. I would like to upgrade from 880m to 980m on a MSI GT70 Dominator Pro from 2014. Is this possible? Do I need necessarily a BIOS Update? And also another VBIOS? Or Maxwell is not compatible with Kepler? On the other hand, the new GT70 are indeed equipped with the 970m.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.