Lind.LHeart

Hi all what do i write to load the aml table for the DSDT override?

ami doing anything wrong? because the framerate that i was getting during games was ard 25fps... is this due to me not doing DSDT override? although the GPU says its working fine?

Hi all... i am not sure if i did it correctly but it shows that the device is working properly... it has been awhile and i took Tech Inferno Fan and Dan advice and upgraded my PC to a windows 7 64 bit os... below shows the steps i took [ATTACH=CONFIG]13160[/ATTACH] just to show you guys what my TOLUD is... though im not quite sure what it is... [ATTACH=CONFIG]13161[/ATTACH] this is my computers intel chipset and CPU... [ATTACH=CONFIG]13162[/ATTACH] installing the 306.97-desktop-win8-win7-winvista-64bit-english-whql driver to my leadtek Winfast GTX 660 Hurricane II this is what i think it is called thanks to google search... rebooted plug out the express card and put it back in after im in desktop screen. checked device manger shows that device is working properly However there is this code 12 problem that i believe i need to do DSDT override? beauese i didnt do it... GPUZ v0.8.0 shows the results below with this error(?) i presume... Please do advise me if there is anything wrong here... thanks again to those that has helped me... please ignore the bad english...

thanks a lot Tech Inferno Fan and dan i will be considering the upgrade to windows 7 but im not that keen on it my laptop seems to have a lot of problems when i loaded windows 7 to it the other day... i guess i will be playing around with the dsdt override first some more before actually upgrading it to window 7. thanks a lot! appreciate the hep given! please continue helping me though

apparently i seemed to be getting the blue screen of death with only 1 2gb ram module is it that i took out the wrong one out? is there such a thing? i tried this one " http://forum.techinferno.com/diy-e-gpu-projects/3539-guide-dsdt-override-simultaneous-igpu-dgpu-egpu.html " just now... maybe i should try the original longer way this time... how do i know if it remains? i rechecked the file the code is still there...

okay i will pull out 1 ram module and try the dsdt setup again. this might be a stupid question, but when i install the driver, when it is rebooting do i have to plug the expresscard out??? cos my screen goes black if i dont do that? i saw a youtube video and he seems to plug it out when it it is restarting but another guy seems to be able to just leave it on. so i should take it out during restarting procedure right? once again many thanks!

unfortunately i dont have the 1.x setup... it doesnt have any dGPU just a 4500MHD integrated graphics i suppose... im using a GTX 660 by leadtek 2 GB... i have 4 GB of ram installed for the computer... CPU Type Mobile DualCore Intel Core 2 Duo T6570, 2200 MHz (11 x 200) Motherboard Name Lenovo 2743RS6 Motherboard Chipset Intel Cantiga GM45 System Memory 3036 MB (DDR2-667 DDR2 SDRAM) DIMM1: Kingston 99U5295-011.A00LF 2 GB DDR2-667 DDR2 SDRAM DIMM3: Kingston 99U5295-011.A00LF 2 GB DDR2-667 DDR2 SDRAM so i guess i should take out 1 of the RAM modules and try the eGPU now?

Windows vista enterprise 32 bit service pack 2 and its a lenovo sl400 i know its old thank you for helping me by the way been stuck for ages -

it didnt work am did i do something wrong? Microsoft Windows [Version 6.0.6002] Copyright © 2006 Microsoft Corporation. All rights reserved. C:\Windows\system32>cd \Users\ C:\Users>cd TEST COM C:\Users\TEST COM>cd Desktop C:\Users\TEST COM\Desktop>cd DSDTEditor-Linux-Mac-Win C:\Users\TEST COM\Desktop\DSDTEditor-Linux-Mac-Win>iasl dsdtoverride.dsl Intel ACPI Component Architecture ASL Optimizing Compiler version 20120420-32 [Apr 20 2012] Copyright © 2000 - 2012 Intel Corporation dsdtoverride.dsl 3701: Method (OGCD, 0, NotSerialized) Warning 1114 - ^ Not all control paths retu rn a value (OGCD) dsdtoverride.dsl 3745: Method (OGCA, 0, NotSerialized) Warning 1114 - ^ Not all control paths retu rn a value (OGCA) dsdtoverride.dsl 5960: Acquire (MUTE, 0x03E8) Warning 1128 - ^ Result is not used, p ossible operator timeout will be missed dsdtoverride.dsl 5972: Acquire (MUTE, 0x03E8) Warning 1128 - ^ Result is not used, p ossible operator timeout will be missed dsdtoverride.dsl 5985: Acquire (MUTE, 0x03E8) Warning 1128 - ^ Result is not used, p ossible operator timeout will be missed dsdtoverride.dsl 5998: Acquire (MUTE, 0x0FFF) Warning 1128 - ^ Result is not used, p ossible operator timeout will be missed dsdtoverride.dsl 6010: Acquire (MUTE, 0x03E8) Warning 1128 - ^ Result is not used, p ossible operator timeout will be missed dsdtoverride.dsl 6023: Acquire (MUTE, 0x03E8) Warning 1128 - ^ Result is not used, p ossible operator timeout will be missed dsdtoverride.dsl 6036: Acquire (MUTE, 0x03E8) Warning 1128 - ^ Result is not used, p ossible operator timeout will be missed dsdtoverride.dsl 8516: And (CTRL, 0x1E) Warning 1113 - ^ Result is not used, opera tor has no effect dsdtoverride.dsl 11727: Return (One) Warning 1104 - ^ Reserved method should not retu rn a value (_Q6D) dsdtoverride.dsl 11774: Return (One) Warning 1104 - ^ Reserved method should not retu rn a value (_Q6C) ASL Input: dsdtoverride.dsl - 12162 lines, 379626 bytes, 6387 keywords AML Output: dsdt.aml - 48543 bytes, 1457 named objects, 4930 executable opcod es Compilation complete. 0 Errors, 12 Warnings, 0 Remarks, 48 Optimizations C:\Users\TEST COM\Desktop\DSDTEditor-Linux-Mac-Win>asl /loadtable dsdt.aml Microsoft ACPI Source Language Assembler Version 4.0.0NT [Aug 28 2009, 18:36:36] Copyright © 1996,2009 Microsoft Corporation Compliant with the ACPI 4.0 Specification Table overloading succeeded C:\Users\TEST COM\Desktop\DSDTEditor-Linux-Mac-Win> then i rebooted... then went to device manager , resource connection but large mem seems to be missing ?

i am trying to do the DSDT override but i came across with this error " Error: Count not access the registry path: System\CurrentControlSet\Services\ACPI\Parameters\DSDT\LENOV\TP-6A___\00000180" when i enter " asl /loadtable dsdt.aml " i dont think this is supposed to be like this right? please correct me if im wrong... i forgot to run it on admin it now says succeded... sorry im bad at this...

thanks for the reply. i cant seem to even have it to run in internal screen... the computer says that it seems to be working properly but it doesnt seem to actually recognise it... is it because i dont have the setup1.x and all?

can anyone help me out here? i still cant get my GTX 660 to run... the last i did and it showed that the device was working properly in the device manager but the clock and all showed " 0 ", could someone help me out here? im trying to get it to run using the internal screen much appreciated.

would really appriciate help me to solve my eGPU problem... im using a 660 as you recommended to run the internal eGPU set up but i still cant get it to work i am using GEFORCER304 DRIVER which i think is the 32 bit version of the 306.97WHQL driver but i cant seem to get it to run... please tell me on how to procede on from here...

im using a 660 to run the internal eGPU set up but i still cant get it to work i am using GEFORCE R304 DRIVER which i think is the 32 bit version of the 306.97WHQL driver but i cant seem to get it to run... can anyone help me oout here? - - - Updated - - - im using a 660 to run the internal eGPU set up but i still cant get it to work i am using GEFORCER304 DRIVER which i think is the 32 bit version of the 306.97WHQL driver but i cant seem to get it to run... can anyone help me oout here?

I cant seem to run or even have Nvidia Optimus for my eGPU set up... Could anyone help me out here? Im using a Leadtek GTX 660...