Jump to content

TomJGX

Registered User
  • Posts

    171
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by TomJGX

  1. It's something like this: - - - Updated - - - I have been using the advance restart method to disable driver signature enforcement (Is there anything wrong with that?)... NVIDIA control pannel settings is always on high performance and yes I am running Optimus mode... I'm going to install 353.62 again... Never had so much trouble making this work before...
  2. J95 I tried, however not working... Still stuck like this.. On Performance Level [0]-P8...
  3. @J95, my XTU works fine.. Everything is fine except for this damm GPU driver lol.. I've tried the 343.17 and event that is a fail.. I am totally lost other people have no such stupid issues... So ok @J95, do you want me to try 343.49? I can decipher which part of your post is aimed towards me.. Also what is this P-states matching? How to do it?
  4. I am on 10... Nothing is working.. Their inf is for 10 too.. Sent from my LG-H811 using Tapatalk
  5. I'll try yours... I tried the modded inf from laptopvideo2go and hardly any better.. It seems no memory is being used by the GPU and clocks are stuck on low P-state... Wtf has NVIDIA released.. POS driver.. J95's inf mod is dead on and it installs etc but something is fundamentally wrong with this driver...
  6. @J95 the nvdisp file is a total fail.. Drivers install but for any game GPU is stuck at lowest power setting... it doesn't ramp up at all.. Memory usage is like <100mb.. Trying ncvif or whatever the other one is.. Edit: Have tried both, no difference. Drivers install however whenever I run game, GPU is stuck at lowest power setting which is 135/500 or something... I even reinstalled Windows 10 since it was installed in a Legacy manner earlier and made it UEFI but I am lost and don't know what else to do... @Lee James Wood, have you come across this bug or whatever?
  7. See J95's above post of the 353.62 driver... He's given a fix for XTU... Also @J95 thanks for the mod, will report of the performance later....
  8. XTU installed.. Have the latest version however getting the 0Hz processor reading bug...
  9. I meant that if the downgrade had failed you would need to blind flash. So no problems with downgrade at all? I have a A13 BIOS Motherboard myself and want to flash unlocked BIOS so need to downgrade. Let us know how it goes..
  10. You might want to be careful... This might cause a brick.. It's risky.. I would be prepared to do a blind flash if necessary.. Let us know how it goes though.. I need to try something like this too..
  11. No it isn't compatible... You will brick your system. Do not flash it.. The R2 has the VBIOS integrated with the system one and there is no unlocked version.
  12. I think you should be able to find it on Prema's website..
  13. @J95, can you mod the inf for the new driver? I'm getting driver upgrade itch now.. Haven't upgraded for ages now
  14. I would use thermal pads on GPU... This would be a bad idea and will be troublesome to clean in the future.. Some Phobya XT pads or Fujipoly pads will be perfect...
  15. I think your problem might be the heatsink.. I would get a new one if you can.. If you have done all of this, the temps shouldn't be so bad..
  16. Neither VBIOS will work.. The new AW17 has the VBIOS integrated into the system one hence someone will need to mod the system Bios like Premamod for Clevo laptops..
  17. @J95, how do I flashed unlocked BIOS A11? Can I just downgrade from A13 to A11 and then flash A11 unlocked in DOS? Anything special I have to do when downgrading BIOS?
  18. I think I'm going back to 347.88/347.90... In 350.12, I've got my memory clock getting stuck on 799Mhz randomly.. I have to literally plug and unplug my laptop (remove power cable) to reset the GPU clocks, close all 3D programs and open them... That explains some of the FPS drops I'm having..
  19. Mine goes above that... Can you not get a 240W PSU easily where you are? Amazon UK has quite a few and I think even Amazon US does.. where are you located BTW? I really think your getting power limited... Have you flashed Svl7's vBIOS properly too? That's literally the 1st thing I did when I got my 970M.. Also @J95, I've tried both the nvdispi and the nvcvi... The nvdispi works best for me.. The 2 nvcvi only show the graphics driver, PhysX and GeForce experience under the stuff to be installed... The nvdispi shows theese 3 + the 3D Vision stuff + Mircast... I installed NVIDIA HD Audio through Device Manager so should be fine..
  20. J95, I guess the nvdispi_inf is the same as the previous one? Previous one installed fine for me.. No throttling etc in Optimus mode... I will try the rest and get back to you - - - Updated - - - Halo, I think the problem might be that you've got a 180W PSU... Even with 970M, your probably using a bit too much power from it causing throttling.. Driver wise, you need to install nvcvi.inf which J95 linked in his 1st post which is specifically for 970M/980M in AW 17 R1 in Optimus mode...
  21. J95, nvdispi has all options when installing except for NVIDIA HD audio.. Can you please add that in... I've tried modding driver myself but god knows what I have to do..
  22. I will do so in the morning.. 1.30a.m here in the UK... BTW, where are you located J95? I haven't been able to figure this out at all
  23. Haven't will try tomorrow... Gaming time now .. On the safe side, can you just mod the nvci and add the line for 970M? That should work.. No need to do anything else.. I will try both then..
  24. Can you make a mod for Optimus ppl? Just standard one.. Please don't remove anything.. I want everything like the HD audio, mircast etc.. Thanks J95.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.