johnksss

A rumor huh...

No, that is not normal i'm afraid...

http://www.3dmark.com/fs/9909335

Going to be lots of work. That's why I didn't even try on the P570WM3 with any variant of the 980N.

That's what I get about mine. No g-sync at the moment.

And yes friends! We have yet another new power connector.

That looks closer to do able....

Nice! Now, who to order from. Edit: Ordered.

Welcome to the fold!

Despite what is going on with you and the PSU, it's max shut off is 442W to 452W. I get this number by using 5 PSU's 1 at a time. And that is where they cut out at. They are rated at 330W RMS from my understanding. If it was max watts then it would shut off a little before 330W or right at 330W. And from what I was told. They are rated at 330W because that is what the power jack to the board can handle without being a threat to itself. (So I was told)

Sounds about right. Looks like cpu was 200 mhz lower on both runs which scored lower results.

I posted gaming benchmarks a few post earlier. I was playing at Fallout 4 @1.536ghz / 1.8ghz overclock on 6ghz rated memory. It seems to be somewhat less under windows 7 though. 1.5ghz / 1.753ghz. I wish, but nope. It's about 4.5 ghz on cpu. Did you try the 368.89 drivers yet? I would start there....

That's a big 10/4 negative!

Don't really know....

Yeah it is!

Thanks goes to @Khenglish!

For a day. It didn't work as intended so I just wiped it off. Checked resistance and it's exactly where it started. 11.9 while installed.

1.43V is the calculation I get.

Yep. Fallout 4.

Pretty warm, but was able to game at 1536/3600 or 7.2 ghz. Single card Edit: Fallout 4.

Thanks. Yeah, but not sure if the pencil helped any because at first I couldn't figure out why it wasn't working, but I think that has since wore off. So it would be based off your hard mod. And if that is 1.48V, then that's what is running....I think. lol

Yep....

I got past that. Card works on all oses now. It was user error.

They may do like they did for the evga notebook and give it it's own section....