bitmutiny

Hola Nando After installing and running setup 1.30, I still have a code 12 error in my egpu driver. I think I have exhausted every option in the FAQ and such material. Lenovo S10e netbook w/ 1.6 ghz and 2 gb RAM running Windows 7 Ultimate 32 bit AMD Radeon HD6970 card Catalyst 13.1 beta 9.4 drivers PE4L to express card I have installed setup 1.30, created disk image, ran compaction, and (finally) successfully chainloaded using bootmgr, setting "noremap" to yes. I couldn't get setup to successfully chainload prior to chaining to noremap. My bootmgr is in hd1 partition 0. I tried to change to chainloader config file to include "chainloader (hd1,0)/bootmgr && boot" and removing hash in the configurable settings prior to setting noremap to yes, but this and other chainloading attempts resulted in blue screen. The only thing that will successfully chainload is original bootmgr settings with noremap. I have also added these two lines: setpci -s 2:0.0 BASE_ADDRESS_5=d001 setpci -s 0:1c.1 1c.b=d0 1d.b=d0 to setup.bat file after "call pci" as instructed in the FAQ, but this also did not stop the code 12 errors. When I first chainload, windows says it need a reboot until the driver can be used (code 14), upon restart and re-chainload, I get the code 12 error. I'm not sure what else to do. Any help or direction would be appreciated.