Jump to content

Wipper138

Registered User
  • Posts

    22
  • Joined

  • Last visited

About Wipper138

  • Birthday 11/04/1988

Wipper138's Achievements

Settling In

Settling In (2/7)

11

Reputation

  1. Tring to get info from Dell is awful. Had three people tell me that the card is not changeable because its a laptop. But they will sell the heat sink for $25. Going to wait awhile and try again hope for yet another person who might know something.
  2. Cool. Really want to do this especially now that I got the screen issue worked out. (thank you again) But realized how blind I went in doing. Since I have the unlocked bios might as well keep it in there now. Was going to try the card a while ago, glad i didnt but hopefully with the new models being out the 680m might drop a bit. Also, anything I should be looking for when purchasing this card? dont want to miss something small but vitally important when upgradeing like I did my screen. From my udnerstanding the green 680m's are clevo and the Blue are dell. other then that I do not have any idea what to look for.
  3. I noticed. The performance on a lot of my games dropped about 30% when I use 3D and it drooped a bit when it went up to the 1080p but not to much. 3D gaming makes a rather large hit to fps though. hoping to get the 680m come fall just making sure I cover all the bases so I dont run into the same issues I did with my screen. Just so everything is right Dell 680m is green and the clevo is blue correct? And I am assuming that the clevo wont work 3D and the 4g over the 2gb on the two versions of the 680m doesnt matter (atleast what I have been told) Edit. Even the crazy over prices on ebay have the heat snk at about $65. Just going to go ahead and get a correct one. Hope I can find one when the times comes from somewhere else but doubt it. With the unlocked bios I shouldnt have any issues swapping out the cards correct? I know they are both MXM and both meant for this system just making sure there isnt something I am missing in my newbness.
  4. Well got the screen installed. Works and looks great no issues at all and HDMI-In is working fine. (even though Nvidia said it wont) Next on to digging up info for a 680m upgrade. tahn k you for all your help without you I am sure that I still would not know what the heck was going on.
  5. Is it same for the R3 and R4? Noticed after my recent screen upgrade how big of a hit performance takes compaired to my old one. So definitely looking to get the 680m hopefully in spring.
  6. ok well only them three cards. So thats that 680m it is, downside is I still dont know what heatsink is on the 660m...
  7. Issues with shipping around christmas. Was wondering if anyone has already been using the 3D screen and if they have any issues with HDMI-In?
  8. For a while I have been on the fence for screen upgrade to 1080 3D or upgrading my 660m. After some thought I figured "Screen has to be easier to get working!" After I made that ell thought out idea. (Found Here: Need help with screen upgrade. - Page 2) I figure I better start asking some questions before I go and do something stupid again. Was wondering what you guys have/have seen put into a M17X R4. Was not planing on going higher then a 680m but want to make sure to stay pretty future proof for atleast a couple more years. Also want to stay Nvidia do to the recent 3D upgrade. Dont plan on doing this until at least spring. And already have the unlocked bios flashed in. So any suggestions or warnings? Also if 680m turns out to be the way I go I have been getting mixed responses for me to need a new heat sink or not.
  9. He said he is taking it off of a 3D R4 that they have been trying to sell as a whole. I Flash Sir svl7's unlocked a10 bios but this laptop was originally only the 900 screen. But with the Samsung monitor and unlocked bios I shouldn't run into any issues correct? I didn't realize the major firmware differences from desktops to laptops and realize now how ignorant I am on the subject. I am more of a software kind of person (Malware removal/repair) and I am realizing quickly how far up the level of you guys are. Sorry for being such a newb cramping up your forums but the help is greatly appreciated.
  10. No go still the same issue. But looks like I am getting the Samsung panel sent to me so maybe that will fix it. Tried chaning it to 60hrz and lower res as well but that didnt do anything.
  11. Awesome thought I had a copy of 331 installer already downloaded but tring that now and I will let you know. I didnt know there was a clean install program floating around (come to think of it JV16 probably would have done it). And I guess the guy who sold it to me is tearing down a R4 to send me the right model now. Guy is tring supper hard to avoid bad review on ebay,
  12. yea the display defaulted to PEG. This turned out to be ALOT of work to loss functionality and gain nothing of note. Yes the screen looks SOOO much better. But do to my living situation atm, I do not have access to my TV. I have been using my laptop as my display for my PS3 and 360. Ever since the upgrade when I try to use my HDMI in my screen goes black. I dont really do alot of console gaming lately (Darn Steam and releasing FF7 and FF8). But that is how I get on and keep in touch with everyone I sued to work with a friends of mine because we all work retail and don't live close so noone ever has the same days off. Any chance you know why that would stop working?
  13. The person I bought it from is saying that I do not have the settings in the BIOS right. I flashed the unlivked a10 bios disabled internal graphics and set lcd to the only 1080 option and still nothing.
  14. LGD02C5 it is.....And I guess there isnt a work around to get this on to work on the R4? Thanks for the help I'm going to go flip out on the guy whom sold it to me. - - - Updated - - - Since 3d vision wont work is there anyway to get my HDMI-in to work again? ever since the swap every time I try using HDMI in my screen goes black. If I do not have my second monitor attached then I get sound but no video.
  15. I flashed my m17x r4 to the unlocked a10 bios. The reasoning is that I upgraded my screen from the 1200x900 to the 1080 120hrz 3d panel. I was told I needed to change advance video options to PEG. But they was already set to PEG and nvidia control panel is still not showing my screen as stereoscopic. Does anyone have any ideas on what to try next? I am at a loss. - - - Updated - - - the actuall application is prr2.exe run that it will tell u ready to flash then run ...flash
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.