Jump to content

Rikoshet

Registered User
  • Posts

    19
  • Joined

  • Last visited

Everything posted by Rikoshet

  1. Hey guys! Have the same p370em, I'd like to know if you succed to upgrade to 4k display? Thanks!
  2. My fault, Prema! Your version did work, I just don't wrote "m" before nvflash! Thank you Prema for your work!
  3. Prema, I've found the one you linked here: https://biosmods.wordpress.com/mxm-vbios/ But it gives me this: Thank you!
  4. Do you mean this? Thank you!
  5. Hi svl7! Months ago I flashed my 970m with bios from first post. Now I'm trying to flash the buios from this thread: http://forum.techinferno.com/clevo/3119-%5Bbios-vbios-mods%5D-prema-mod-stock.html#post54056 Now, when I trying to flash OC1.1 version, with *.bat file or directly in CMD, the flasher gives me "ERROR board ID mismatch". I've tryed all nvflash versions from techpowerup.com that support my card, al versions gives the same error... Options like " -4 -5 -f -u -p" gives help info about using nvlash! And using "o" option gives another ERROR: Firmware image filename must have a valid extension, and mine is "rom", downloaded from third post! Any idea on how to proceed? Thank you!
  6. Hi Prema! Months ago I flashed my 970m with this bios: http://forum.techinferno.com/general-notebook-discussions/8560-nvidia-maxwell-vbios-mods-900m-series-overclocking-versions.html Now, when I trying to flash OC1.1 version, with your *.bat file or directly in CMD, the flasher gives me "ERROR board ID mismatch". I've tryed all nvflash versions from techpowerup.com that support my card, al versions gives the same error... Options like " -4 -5 -f -u -p" gives help info about using nvlash! And using "o" option gives another ERROR: Firmware image filename must have a valid extension, and mine is "rom", downloaded from third post! Any idea on how to proceed? Thank you!
  7. Ok, can you switch in Acer monitor from DP1.2 to 1.1 (I can do it in my DELL monitor) and see what happens? You should have SST signal so 30FPS max on Acer at 4K. It serves just to verify if you have the signal! If not, maybe a bad cable! Where did you find info about TB port 1.1 capability? Clevo on their site said nothing...
  8. I can confirm, p370em + single 970m + modded driver. Bough 970m from r&j tech, have no idea what vbios have it, but it works! The only problem I have is that in Yesemite it does not work with any monitor, even built in!
  9. Hy guys! Any update? Where can I find 50pin cable? Thanks!
  10. Hi Ethrem! May be it's not the right topik to ask, why you did not try on insanelymac.com? Anyway, if you are using Clover bootloader you can drop DMAR table so VT-d technology would not be used! Simple...
  11. Thanks Prema for answering! so the last question: What you mean "hex myself through the setup"? What setup? Did you mean bios setup? Thanks again!
  12. Hi Prema! Thanks for your work! I have a clevo p370em and have a question: I know the changes are "under the hood" but I have Mac OS Mavericks and for me, and other guys that uses other OS, would be cute to see setting directly in bios/advanced like this guy on clevo p370sm: When I was choosing a laptop for Mac I already knew about your mod but did not knew about "win+xtu" thing... Thanks!
  13. Not necessary! To be shure just do a try without overclock! I too have this reset problem with overclock, just put the freqs not as high!
  14. Can't find any info on it! Can you share some links?
  15. Rikoshet

    K3000M in P370SM

    Hi FGame! Did you manage to run your card under your system? I've asked on this forum about combhination of Clevo p370em (Chief River platform/Intel Ivy Bridge) and gtx 770m card. The seller of card say the card is not compatible, will run only on Shark Bay platform/Intel Haswell CPUs, and here, on forum, guys said I'll be fine with gtx 6xxm series card... The k3000m card is for Huron River platform/Intel Sandy Bridge CPUs, 2 generation difference with your lappy, info from: NVIDIA Quadro K3000M - NotebookCheck.net Tech So, I'm curios it is run on your laptop? Thanks! P.S.: i bought a quadro k4000m and it is fine with my laptop.
  16. Hi lm1z! This cable is eDP, not LVDS! You must be fine! What are you waiting for? Disassemble your lappy and take a look if there is an eDP port soldered near LVDS port!
  17. Thanks Khenglish for your quick answer! Don't know why I was shure 770m will fit fine, it have the same 670mx chip... Anyway, the 680m is too much for my needs (video editing) so I'll go for 670mx or 675mx. Thanks again!
  18. Hi guys! This is my first message...I swear I tried to use google search in forum to find an answer! I just bought an P370EM without GPU, so I find an gtx770m but seller says that it would not go with this lappy... Could you guys please confirm it? Or link me to a compatibility list of GPU's.... Thanks and sorry for my english!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.