Loïc Marin

OK, i'll search a heat gun

Thanks for the help

Envoyé de mon Nexus 5 en utilisant Tapatalk

I have a good soldering iron so i hope it will be ok

Is it really complicated?

Hi! The system was booting with the 780m before the bad flash

It's seem that I have 2 solutions:

- buy an alienware m18 → flash my bricked gpu with the sli (too expensive)

- buy Dell Alienware Nvidia GTX780M 780M Video Card Replacement Vbios V Bios Chip 256K | eBay → I order one and i'm wainting for it...

eng

or

french

But I don't know if your motherboard is supported. You can try and see if it works

Did you try "fan control tools by Pherein"?

Hi!

I recently upgrade my gpu from 670mx gtx to 780m gtx! My board is ms16f3. (msi gt60 0nc)

Unfortunatly, I made a bad vbios flash :-(

Now :

If i boot with 780m: stuck at msi logo screen

If i disable 780m, the laptop boot without problem but i have no access to the card → no nvflash to recover

If i remove the card, boot without problem

If i boot with the old 670mx → no problem

Please, is it possible to force boot on igp while keeping the 780m awake and so make a nvfash?

I have an unlock bios :

Thanks in advance!

Thanks for your answer.

But in fact, with 3d mark 06 for example, the number of fps go down too

Hi! I have a msi gt60 0nc with 670mx/ i5 3230m

When i begin to overclock the GDDR more than 300/400mhz, i have this problem (see the picture)

Idem for the core

Do you know what's the problem?

P.S.: overvolt doesn't help

and also i like to know if before a flash we need to do a EC reset or leave battery off for 10 secs instead, regards!

How to control fan on MSI GT/GX (not GE)?

1. Install RWEverything: http://rweverything.com/downloads/RwX64V1.6.4.zip
   
2. Download "Fan control Tools by Pherein" : Fan Control Tools by Pherein v1.0.4.rar
   
3. Unzip in the installation folder of RWEverything
   
4. Open "Fan profile applier" and set your notebook (16F2-12 for msi gt60/70)
   
5. Select Profile -> "Quiet" and check remember (x3)
   
6. Apply!!!
   

---------------------------------------------------------------------------

Note:

1. Don't apply "max" profile (can cause shutdown)
   
2. Use your own setting with the "Fan Profile Editor.exe"
   

3 month? Sounds like a short time for dust build-up... but still worth checking I guess. Else re-applying the thermal paste might help as well.

Hi,

I had a hp envy dv6 (3 month) and had temp like 105C (cpu) and 90C (gpu).

Was it a problem with my laptop or is it "normal" cause it's an hp?

Sorry for my poor english

I also notice that hp said my gpu is a 635m gt but it's a 630m gt rebrand...

Thanks HP...