beemerboy88

Reset the cmos but still not working. Sent it away for repair. May not be the bios, could be a hardware fault.

Update was supposed to improve hybrid power performance and battery life but laptop bricked. In process of doing an RMA with MSI.

It was ok until i updated the bios (i've always done it on laptops and never had a problem before). Followed correct procedure on msi website and used correct bios. Flash completed ok and then it loaded up windows. But failed to start when i rebooted. No beeps when i try to blind flash. Nothing on screen. Computer doesn't access the usb. Been trying all day.

hello I have a GT70 20D-039US and there's a problem with the uefi bios so computer just has a blank screen. No bios access or boot options. Fan spins. I am trying to do a blind flash to recover it but it wont work. This is what I've done. 1. downloaded the correct raid bios file E1763IMS.707, 2. renamed it to AMIBOOT.ROM, 3. copied it to fat32 formatted usb2 stick, 4. pressed ctrl & home key on power on. Nothing happens. Usb led does not flash. Also tried a cd. Am I doing anything wrong? What's the correct method?. Thank you. Note: Does anyone know where i can buy a new motherboard from?.

I may be wrong. Best to just try it and see. Sent from my GT-I9300 using Tapatalk 2

Use throttlestop or modify the cpu settings in the power profiles. Sent from my GT-I9300 using Tapatalk 2

Seems alot of people listen to the fans otherwise threads like these wouldn't exist. If you have nothing constructive to say then don't bother posting. Sent from my GT-I9300 using Tapatalk 2

Its the on off cycling of the fans on idle on some clevos that can be annoying (p series in my experience). If gaming then louds fans are expected and shouldn't be of a concern. But If you want to also use it in a quiet office as an everyday pc then the cycling may become tedious. Sent from my GT-I9300 using Tapatalk 2

Reflashed it with vbios from this thread. Now goes over 993 ok. Not sure what was wrong with the other one. I am using inspector.

get yourself a dell 240w psu. no need to mod it. just buy this adaptor X75 Power Connector - 7.4 x 5.08mm Female Jack to 5.5 x 2.5mm Male Plug

I tried numerous thermal compounds over the years and ICD7 is definitely the best out there. When applied as instructed (pea size blob in the centre of the die) it works best. do not spread it over the cpu/gpu as that can create air pockets. Cure time is also minimal.