7r0jan
Registered User-
Posts
6 -
Joined
-
Last visited
About 7r0jan
- Birthday 08/10/1974
7r0jan's Achievements
Curious Beginner (1/7)
13
Reputation
-
To start with: A08 with volt mod. cpu temp. one round of bf3 with standard clocks and cpu turbo turned off: highest temp 78 c Ave temp:71 c one round of bf3 with standard clocks and cpu turbo turned on: highest temp 98 c Ave temp:90.8 c gpu temps. one round of bf3 with standard clocks and cpu turbo turned off:highest temp 70 c Ave temp:64.9 c one round of bf3 with standard clocks and cpu turbo turned on:highest temp 75 c Ave temp:66.4 c overclock. GPU Core 700, GPU Mem 900, GPU Shader 1400. one round of bf3 with mild overclock and cpu turbo turned on:GPU highest temp 76 c Ave temp:69.4 c GPU Core 800, GPU Mem 950, GPU Shader 1600. one round of bf3 with standard clocks and cpu turbo turned on:GPU highest temp 77 c Ave temp:71.8 c ill get some paste at the weekend..
-
A few months ago i had the 7 bleeps, at that point i had a motherboard swap that also died.. Swiftly followed by another swap. thus leaving me with the newer 124D (G116) card. I watched the engineer do a repaste, so i was expecting it to be ok. But ill get some and do it a again. Thanks for pointing it out. Pete.
-
Thanks ill have to repaste just to cure my curiosity. I'm also waitng to see if others with the the GF116 card have the same simlar results. thanks, Pete.
-
I'm just starting out with this.. I've applied a08 voltmod and I've wound the gpu up a little.. Why is that when I up the gpu settings for 3DM tests i get a lower score from the cpu? i have added my results to the benchmark page.. cheers, Pete.
-
looks good now 3dm has gone up from: P6734 to P7148 I tried 770,1540,1100 & 750,1500, 1000 but I get artifacts and crashes. I'm going to work now,later on i will up it slowly till I get some better results... Thanks Pete.
-
Hi guys, my first post.. I'm running the GF116 gpu too, i am only getting .86 in the a08.. gues it doesn't work on the new one Pete.