clarenc3

Massive kudos man, runs like a charm on my Y400. I'm getting slight overheating or weird rendering problems though when memory is on 2.5GHz, and when gaming I need to use inspector to pull down to about 950MHz/1900MHz. Could be the worse cooling in the Y400 or a bad copy of GT 650m? Any chance you could make a similar "eco" with lower P0 settings, probably more suitable for Y400 users? Cheers

Morning all, I'm having some serious problems booting into my Win7 install UEFI USB stick. I've been on v1.04, v2.02 and now on svl7's v2.02 mod, all with similar results. On boot, I set: USB Boot: Enabled Boot Mode: UEFI OS Optim.: Win864bit (should load UEFI settings I think). To create my UEFI bootable USB I have tried: Win7 download tool and a UEFI copy of win7, Rufus, selecting UEFI/GPT boot and a UEFI win7 copy, manually creating the efi/boot folder from a BIOS win7 copy I've also played around with changing to legacy then changing to UEFI to "force" a UEFI drive scan, playing with disabling most boot settings in locked mode (e.g. WLAN=off, USB always on=off), and running off minimal internal setup (removing RAM, removing drives, internal keyboard/touchpad, etc). I've also tried all USB jacks. I've had a few successes on which I can boot to the drive and it remains detected over successive boots along with Win8 but when I reconnect the USB, it's no longer detected. On the few successful boots, it hangs after loading the install files. By "hang" I mean CPU fan turns off, no HDD/SSD activity and no USB stick activity. Have I completely lost my mind and missed vital info, or does this board simply not like USB UEFI? Can anyone else please confirm this behaviour? Thanks

I've tried UEFI win7 and it DOES NOT work. Legacy works fine as you'd expect, but UEFI just won't work. The furthest I got was installing OS, booting into Safe, but locking at CLASSPNP.sys. I'm guessing there's some incompatibility, but what do I know...?