fir3blad3r

somebody pls help me get a 0.9v vbios for my Dell 7970m...the autoshutdown is driving me crazy....sorry for crying for a baby but i really hate to have a 5kg paperweight on my table... =(

I have tried the patcher with a lot of bios including 017 021 and 022. none of which is able to change the 3D voltage to below 0.95v. I just hope bro svl7 can answer my prayer for a 0.9v vbios soonest...

The heatsink gets hot when I run furmark so I believe the thermal contact should be good enough. I had also used shortened threads for the screws so that sufficient pressure is on the die of the GPU. Unfortunately here in Singapore there isn't any ICD7 or phobya pads so I pretty out of luck in this department. My last hope will be a undervolt to try bring them the temp when running 3D.

To SLV7: Hi, I tried to use the vbios patcher and the provided vbios pack for 7970m, choosing the 0.95v and tried to set it to 0.925 and also 0.900 in the vbios patcher but it still reads at 0.95 in HWinfo64. I read earlier that you said that vbios patcher is a little outdated. Can you help me out by making a 0.900v or even a 0.875v version for me? I am running a m17x R2 with Dell 7970m meant for a m17x R4. The original bios on the card was 017, but I've tried flashing to 021 and 022 and no help at all. Its getting the dreaded auto shutdown when it hits 85 degrees. Pls help... Will be glad to buy u a beer if I can get this working. Thanks!

Hi bro SVL7, I am running a M17X R2 with a Dell 7970m card. The stock card seemed to run on 0,825v but I keep getting shutdowns at >85 degrees running furmark . I have already ensured proper X-bracket/heatsink fitting and sufficient thermal grease and pads were used on the GPU die and the Vrams/mosfets. Can u kindly post a vbios with 0.8v or even lower maybe 0.775v for me to lower the temp and avoid the shutdowns? I will gladly buy u a beer! =)

Hi guys any ideas on the exact location of the .inf file to modify?