Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation since 02/05/24 in all areas

  1. Hi! Ok. Your unlocked vBIOS done. Check PM. 1. Completely uninstall MSI Afterburner (if it installed) with all settings. Reboot laptop. 2. Download the program DDU (NVIDIA drivers uninstaller). Run it and completely uninstall all NVIDIA drivers. 3. Download and extract archive Ant4rez.rar 4. Flash unlocked vbios (just run the command file flash.bat ). Reboot laptop. 5. Now install NVIDIA drivers with enabled option "Clean Install". Reboot laptop. 6. Done. Now you can run Nvidia Inspector utility and try overclock your card.
    1 point
  2. anyone have collection of dell vbios for m3000m and m4000m? it is to try out on precision m6600 to see if there's a chance if one of them could work. cause there also one version of vbios of m3000m said to work on nvidia optimus is vbios 84.04.49.00.19 that version i would like to have to test it. i flashed quadro m3000 se (could display on dp on m6700 but not the laptop screen) with m3000m cause it was similar and it enable to display on latop screen. i didnt fully try it out cause it wasnt properly thermal paste like didnt change. the gpu i got is artfacting even tho i flash it.
    1 point
  3. Hi! Ok. Your unlocked bios done. Check PM.
    1 point
  4. Ok. Your bios with unlocked Wi-Fi whitelist done. Check PM.
    1 point
  5. Hi! You can upload your file bios backup into any fileserver and post the download link. Or you can send me your file backup of bios via PM. To create backup of bios use attached utility. Extract attached archive directly on the Desktop and run Backup Utility as Administrator (right click mouse, choice "Run as Administrator"). Utility will create archive "results" directly on the Desktop. Post here this archive "results" or upload your file bios backup into any fileserver and post the link. https://www.sendspace.com/file/mxoavw
    1 point
  6. Hi! You can post here your bios backup (bios dump). To create bios backup use attached utility. Extract attached archive directly on the Desktop and run utility as Administrator (right click mouse, choice "Run as Administrator"). Utility will create archive "results" directly on the Desktop. You can post here this archive "results", or upload it into any fileserver and post the link. https://www.sendspace.com/file/mxoavw
    1 point
  7. Hi! https://www.techpowerup.com/vgabios/?architecture=AMD&manufacturer=&model=R9+M290X&interface=&memType=&memSize=&since= https://www.techpowerup.com/vgabios/?architecture=Uploads&manufacturer=&model=R9+M290X&version=&interface=&memType=&memSize=&since=
    1 point
  8. Thank you guys for the hints with the thermal paste, DX11 downgrade and FPS mod. I restore my old and mighty m11x R3 (one of the first series with 2617M and 1GB 540). I love this machine, and it (still) fits my needs. Any recommendations for a new IPS screen to mod the display?
    1 point
  9. Bios recovery procedure: Take a USB flash drive, go to "My computer" Right click on the USB drive and select Format. Change the filesystem from NTFS to FAT32. Format the drive. The flash drive does not need to be a 'bootable' flash drive. Leave it as is. 1. Download archive ZIVY2.rar from this link: https://www.sendspace.com/file/bjpgb7 2. Extract archive ZIVY2.rar and copy the file ZIVY2.bin to the USB flash drive (format FAT32). 3. Unplug your laptop from the AC adapter. 4. Disconnect the battery from the motherboard. With everything disconnected hold the power button for 20-30 seconds. This purges residual power from the board. Disconnect the hard drive (This ensures that the USB flash drive is read first. I'm not sure if this is necessary, but it may be need). 5. Plug in your USB flash drive into any USB port. 6. Press and hold Fn+R buttons together. 7. While HOLDING Fn+R, plug in the AC adapter. 8. While still HOLDING Fn+R press the Power Button. 9. You should hear the fans turn on very loudly, no display, and no keyboard lights. Let go of Fn+R after a few seconds You should hear a rather loud series of beeps. This is the BIOS being flashed. Let it beep repeatedly as long as it needs to. When the process is done, the beeping will stop, and the laptop will turn itself off. It may also reboot. If all went well, you're screen should now be working just fine. If it doesn't work, then try to use Fn+B combination instead Fn+R. If it doesn't work, then try to use another USB flash drive (USB2.0, not USB3.0), also try to use USB with smallest size, for example 2-4 GB. Also, try to use another USB port in laptop.
    1 point
  10. So it actually works with the 980m vBIOS. I tried modding too soon. I just needed to reinstall the driver. I only ran a very lightweight render test because right now the card is only running on 2 phases. I'm pulling the phase driver from my 980m now to get the 3rd phase back up.
    1 point


  • Newsletter

    Want to keep up to date with all our latest news and information?
    Sign Up
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.