Jump to content
EwinRacing Flash Series Gaming Chairs
Sign in to follow this  
BDogg464

6970m heatsink for 6990m???

Recommended Posts

  Was wondering if the 3 pipe heatsink i have for my 6970m that died, would work on a 6990m if i upgraded?

 

trying to figure out so i can order. Speedy responses are much appreciated

Share this post


Link to post
Share on other sites

also can i use the old x bracket from the back of the 6970m for the 6990m?

Share this post


Link to post
Share on other sites

If anyone can give me a good picture or link to how the thermal pads should be layed out on the 6990m?

I think the cards look exactly the same from what i can tell, and if they use the same heatsink, x-bracket i would assume it's the same as the 6970m for the pad layout???

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By ivm
      Hi.
      Many of us are discontent that we can't freely swap dell and clevo AMD cards (7970m  and new rx480 included) but it seems that I may have found some clue to this problem.
      Few years ago I bought a broken p170em with some ugly black 6990m. It looked like it was baked in the oven with some cookies.
      I put it in my p150em and it was working normally with all sensors, data, etc. No beeping, no turning off.
      What I noticed was that the other soic8 chip "2" (apl-something) was swapped as well as the main bios chip "1".
      No other components were swapped and, as you know, if you just flash the main chip it won't save you from beeping.
      Unfortunately I sold this card as it wasn't powerful enough for me, but now I've ordered a rx480 that I can currently use only in my gt70 and  I think it gives me some clues how to put this thing into a clevo laptop.
      Does anyone have any Idea what that APL-somehing chip is and does it have its own firmware?




    • By IronPancakes
      Hey guys, first post, but I thought I’d discuss my heatsink fan retrofit in my old M14x r1. 
       
      Old fan was loud and not very efficient: the air transfer rate was around 2 cfm (I’m assuming cubic feet per minute). Finally had enough and decided to swap out the crappy r1 fan/coughing pinwheel for a r2 fan (rated at 10.4cfm). 
       
      I found an old r2 heat sink on eBay (beware though that the heat sink for the r2 will NOT fit the gpu/cpu configuration for the r1. HOWEVER, the fan of the r2 heat sink it is attached to is a carbon copy fit into the r1 MoBo. A few philips head screws and a seal of good electric tape and BAM, you’ve got a significantly cooler and MUCH quieter intake fan in your old R1. 
       
      My CPU temps from before were around 87-88 max load in FSX, 65 for the GPU; bear in mind this is after a repaste. Now with the new fan, I’m not going over 77 degrees on the CPU, and the gpu stays around 58, all while being MUCH quiter. I’ll post pics of the walkthrough if anyone is interested.
       
       Just thought I’d share with all you fellow loonies trying to squeeze every last frame and degree out of our “portable toaster ovens with a screen and keyboard”. 
       
       
    • By Henrik9979
      First I want to thank the community, who have inspired me to do this project.
      I will give you guys the chance to follow me on this journey.
       
      I hope you will all help me come up with ideas, techniques and parts that could become handy.
       
      This modding may be possible to convert to allot of laptops.
       
      Let's begin!
      Here is the measurement of the went hole.
      77mm X 16mm

       
      I have 2 ideas for what can be done.
       
    • By Mountain
      I was looking to open up my y50-70 and replace the thermal compound with liquid metal, but I can't find any information on the heat sink. I know you can't use LM on an aluminum heatsink, so how do I find this info? Didn't see it in the user manual- does anybody know if it is safe to use liquid metal on this heatsink?
    • By Mountain
      I was looking to open up my y50-70 and replace the thermal compound with liquid metal, but I can't find any information on the heat sink. I know you can't use LM on an aluminum heatsink, so how do I find this info? Didn't see it in the user manual- does anybody know if it is safe to use liquid metal on this heatsink?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.