Jump to content
Apologies for the spam Read more... ×
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By TechDrago
      Hi,
       
      I am having some heat issues with the GTX 680m I installed on my Alienware M17x R2 (yes, its old).  Having installed and ran HWiNFO64, it appears that the maximum rpm of the GPU fan is 2560rpm, even when the GPU reached a maximum of 93° Celsius.  The rpm seems low, but what is the maximum rpm of the fan, does anyone have any ideas?
       
      Thanks
       
    • By PrecastFlame
      Hi, I'm having problems trying to connect a GTX 750 Ti to my Lenovo T420 using the dock EXP GDC Beast (express card version).
      My laptop: Lenovo T420
      RAM: 8GB DDR3
      CPU: Intel Core i5 2520M
      GPU: Intel HD Graphics 3000
       
      My problem is: if I plug the express card and I turn on the laptop it doesn't boot up and the screen becomes horrible, with coloured pixels and a sound like "bip-bip".
      If I try plugging the express card when the laptop is already turned on it sees the gpu, but if try installing the drivers I have to apply the modifies restarting the computer.
      I hope you understood my problem (I don't speak English very well).
      Please help me, It's making me crazy!
       
      EDIT: I didn't say that if I plug the express card when the pc is already turned on, in the device menager there is "Error 12" on the gtx 750 ti
    • By yoshomiamoto
      Hello Fellow Tech Gurus!

      I am having a huge headache after upgrading the ram memory of my m17x r3. 

      First let me start by saying I have been experiencing issues with my current ram setup recently, and so i decided to replace the ram inside of my computer, thinking they had gone out on me. It originally came with x4 2gb memory sticks, and as I started to experience issue, I started to removed them, and I was down to 1 2gb stick. It seems to me ram slots 1 & 2 are not working properly as when I put ram memory into them I would get BSOD in 5-10 mins of computer usage after boot. So I am thinking the slots have gone out. I also tested each slot individually and still same effect.

      So I went on the try out slots 3 & 4 under the keyboard, which seems to work just fine when I use only 1 ram chip in one or the other. But the problem occurs when I try and fill both ram slots in slots 3 & 4 under the keyboard with crucial 2x 8 gb of ram sticks, which total to 16gb total ram memory.

      BSOD and freezing occurs like crazy. But if I use just one of the ram sticks in either slot, no problem.

      I dunno if this is hardware or software. I am think that my motherboard is on its way out the door, but any suggestions you all have would be great. I have already clean installed win 7, and is currently running bios A10 (unlocked, I believe)

      I would also like to note that my motherboards internal vga is not detected, and just noticed this a few days ago upon trying to figure out the ram situation.

      other issues is my laptop battery is pretty much dead, and the only for my computer to cut on is if the AC adapter is connected

      I would also like to know can 1x 16gb 1600 ram stick run in my computer? or is it not supported by my motherboard? 

      thanks!

      Specs:

      Alienware M17xR3 (2011 3D FHD ed)

      Service Tag:
      30W75Q1

      Bios ver:
      A10 (should be unlocked)


      Operating System
      Microsoft Windows 7 Home Premium (64-bit)

      Processor
      Intel® Core™ i7-2960XM CPU @ 2.70GHz

      Chipset
      Intel® 6 Series/C200 Series Chipset Family

      Graphics
      Nvidia GTX 680m

      Audio
      IDT High Definition Audio CODEC
      High Definition Audio Device

      Networking and I/O
      DW1501 Wireless-N WLAN Half-Mini Card
      Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
      HMA TAP-Windows Adapter V9

      Memory
      Crucial 8 GB (x2 qty) DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V • 1024Meg x 64 •

      (these only work under bay 3 or 4, but not dual 8gb at the same time, otherwise BSOD)

      Configuration ID:
      CT3283724

      Storage
      WDC WDBNCE5000PNC SSD (installed into bay 0)
    • By Munchicken
      Hi,
      I just got a Dell r9 m290x card for my m17x r3. I'm using the stock A12 BIOS. Had PEG set in the BIOS and on boot had a black screen. I cleared CMOS, most likely reverted back to SG and on boot had a black screen with 8 beeps.
      I've seen people on here report that it is working for them. Do I need to use a different vBIOS? Or maybe the unlocked A12 BIOS with some settings changed?
      Any help would be appreciated   Thanks.
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.