I created a case for egpu using 2.5mm acrylic sheets. The first time I created a case to support a GPU + ATX psu
Now I created another one for the GPU with an external Xbox 360 203w psu.
the finish was not good but for my use it is already good.
*both cases album
*Construction of the second case
*adapting xbox psu to 8pin power (taken from 24pin)
all made by hand with the tools I had.
By can rx
Hello to all dear visitors,
I have been using Lenovo y510p notebook for two years but in games I think my graphic card is inadequate. After that I've bought Mini PCI-e EXP GDC and attached it to where the wireless card socket is. However because it has x1 speed its performance is too low. Even though on tests rx460's ranks is low than rx480, it has more performance.
In x1 PCI-e port, the performance is too low and inefficient. On GPUz programme, use of memory controller is 20% but use of GPU is 100%. I mean, I've been hooked to the x1 speed.
Components : EXP GDC version 8.0 +450w PSU + rx480
I've read all pages about ultrabay, I want to buy and to share in forum.
If anyone has ultrabay to PCI-e port, I want to buy. Please help.
Thanks for everything.
Hi, I'm having problems trying to connect a GTX 750 Ti to my Lenovo T420 using the dock EXP GDC Beast (express card version).
My laptop: Lenovo T420
RAM: 8GB DDR3
CPU: Intel Core i5 2520M
GPU: Intel HD Graphics 3000
My problem is: if I plug the express card and I turn on the laptop it doesn't boot up and the screen becomes horrible, with coloured pixels and a sound like "bip-bip".
If I try plugging the express card when the laptop is already turned on it sees the gpu, but if try installing the drivers I have to apply the modifies restarting the computer.
I hope you understood my problem (I don't speak English very well).
Please help me, It's making me crazy!
EDIT: I didn't say that if I plug the express card when the pc is already turned on, in the device menager there is "Error 12" on the gtx 750 ti
I have a lenovo y480 trying to set up exp gdc with mini pci-e. I followed the instructions to the letter and still my system does not detect it. graphic card i am using is a evga 1060 and windows 8.1 I am willing to upgrade to win 10 if that would make it easier, just looking for some guidance since i am a beginner at this.
i m trying to let my egpu working through modding the inf file.
My 660ti's device number is this
PCI\VEN_10DE&DEV_1183&SUBSYS_2843 1462&REV_A1 and i manged to add a few lines in the nvlti.inf file, cause my laptop is thinkpad...
i m not sure if i should mod this file or others either way it didnt work.
i added line below
[NVIDIA_Devices.NTamd64.10.0...14310] ... %NVIDIA_DEV.1183.2843.1462% = Section021, PCI\VEN_10DE&DEV_1183&SUBSYS_28431462 %NVIDIA_DEV.1183.2843.1462% = Section022, PCI\VEN_10DE&DEV_1183&SUBSYS_28431462 [Strings] ... NVIDIA_DEV.1183.2843.1462 = "NVIDIA GeForce GTX 660 Ti" for some unknown reason it just didnt work........
Could you guys help me out,
this EXP thing is driving me crazy...