I'm interested to know what is the best Wifi/bluetooth adapter that i can install on a clevo P150EM. All new models come in M.2 form factor, and the P150EM only has the mPCIe conection.
I've searched and found out that there are m.2 to mpcie connecter adapters but i don't know if the adapter+ the wifi card will fit under my keyboard (the place where the mpcie is located), and even if it fits, i still need connector adapters for the antenna plugs.
Any help is much apreciated
Posted March 27
I am trying to do a project feels like a project for me -) with w100er - Windows7 , Intel 3632q, HD4000 , dGPU - 650m and eGPU 1050 - using EVGA 500b as a PSU..
I looked around in the last 3-4 days but I am stuck with error 43 sometimes error 10) .
I installed Prema Bios just yesterday after some worries about ruining my good 11inch friend , but that gone well.
I tried with couple of nvidia packages and on couple of occasions it get to the point of 1050 recognised as such but not starting - because of the error I presume.
1) I used safe mode / no network to deinstall the drivers using DDU
2) Then again in Safe Mode /no Network i used to install package and disable 650m graphics
3) I looked into Prema Bios but couldn't see any options of PCI enabling for hot swapping ...?
I looked into the corecting the .info files of NVIdia installation but could,n make it up what exactly to write and read that if using Premas Bios could be avoided that step.
I have tried to find a Bios for w110er with PCI unlocked but the last ones that I found and installed ( just for that reason ) Win7 v1.5 UV EDITION and OUV editions - did not have that options.
I saw that BIOS for W230 probably have it but I am not sure could be used in any way /modification for my laptop.
I managed to make recognised GTX 1050 and I eve tried to install 720.20 but couldnt despite trying with modified by e .inf files copied lines from 375.63 or 375.95
I saw on forum about success with 1050ti in similar manner - installed 372.20 and straight after that removing Register coded requirements for reboot - another later version
Any advice which way to go ? I should decide if I am going to return the 1050 card and go for RX 480 or something else - I preferred Nvidia because I had a thought of using the internal monitor and looks less power hungry ( 1050 ) compared to 1060 /RX 470
For Sale - Bplus: PE4C version 3.0, PCIe x16 interface for mPICe; Length 60c
Description (derived from Amazon.com):
Support two delay switch to avoid registration problems when boot. (SW1, SW3) Support two sets external pin to setup delay time. (J2, J4) PE4C V3.0 is mPCIe 1-Lane 8.0Gbps bandwidth limit passive adapter in compliance with Expresscard 3.0 specification Cable length of 60cm (cable is rather stiff) PE4C V3.0 package DOES NOT include an AC Adapter an APU
More information on the adapter:
http://www.hwtools.net/Adapter/PE4C%20V3.0.html (see the mPCIe version) https://www.amazon.com/gp/product/B00ZI33ZQK/
Used - Very Good The longer mPCIe fixtures have been removed! (see pictures) Originally bought from M-Factors Storage on Amazon.com on August 30, 2016. Adapter has been used to connect a NVIDIA GTX770 to a SONY VAIO VPCSB2C5E laptop running Windows 10.
Shipping with: DHL/Deutsche Post or local pick-up
Shipping from: Munich, Germany
European Union (free shipping) Switzerland (+10 USD) United States of America (+12 USD) Anywhere else (+12 USD)
Price: 47 EUR, 50 USD, or 0.05 Bitcoin
Payment: Paypal, Bank Transfer, or Bitcoin
Please feel free to contact me! I am happy to answer any questions or provide additional information and pictures.
By Dr. Spacetime
Is it possible for me to connect an eGPU to my laptop via the mPCIe port?
I’m trying to connect an eGPU to my laptop, the laptop is a HP Pavilion TS 15 Notebook PC and I’m trying to connect a GeForce GTX 750 Ti via a PCIe x16 adapter (PE4C V3.0) that connects via an expresscard, but the problem is that it turned that out my notebook did not have an expresscard slot (I had somehow mistaken the memory card reader for an expresscard slot), so I tried using an expresscard to USB adapter, the graphic card starts spinning when i start my laptop but it can’t detect the graphics card and I’m having a lot of problems with the drivers, so I’m guessing that connecting it via a USB doesn’t work, is this true?
But if this is true I was thinking of instead connecting it via the mPCIe slot, but I don’t know if my laptop is compatible with mPCIe and I’ve also heard that HP whitelists its mPCIe ports, if this is true is there anyway you can get around this?
So what do you think, any hope?
Some system specs:
Operative system: Microsoft Windows 10 Home
Version: 10.0.14393 build 14393
Processor: AMD A6-5200 APU with Radeon(™) HD Graphics, 2000 Mhz
BIOS version: Insyde F.02, 2013 08-06
RAM: 8,00 GB
I am having trouble setting up my egpu for a Dell Inspiron 15R-5521. I can't get it to detect my egpu. I have egpu setup 1.30 installed on a usb drive but I can't get it to chainload to windows. It works fine if I plug it into my destop PC so I know it's not the egpu board. The only thing I can think of is to reformat the hard drive to mbr instead of gpt, but I don't want to do that if I don't have to. Please help.
15" Dell Inspiron 15R-5521
i5-3337U 1.8GHz CPU
Intel HD4000 iGPU
ELEGIANT PCI-E USB 3.0
EVGA GTX750Ti video card
Corsair CX 500 PSU
Samsung External Display