Jump to content
EwinRacing Flash Series Gaming Chairs
Sign in to follow this  
TrojanTheGod

Lenovo Ideapad y50-70 BIOS Modding (GTX 860m 4GB)

Recommended Posts

Hey guys, does anyone have the spare time to mod my laptops BIOS so that I can remove the limit of the sliders in MSI Afterburner. So that I can go above a max of 135 on the core, have the voltage and power limit sliders unlocked etc. If it can be done for free, I would much appreciate it, and donate in the future when I get some money. If you can do the task, plz reply and I'll upload my BIOS backup to RGhost if that's the site you guys upload stuff to on this forum. Thanks in advance friends!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By blancaster
      does anyone know why a vbios file  8mb in size for nvidia k80 , myu backup bios is only 256kb
    • By IveGotRoot
      I have recently upgraded my laptop(an M6800 firepro 6100) and replaced it with an GTX 980m. Nvidia says that the latest driver(461) supports my card but i can only install up to 388.13 Ive tried to mod it but i can't figure it out. I can run the latest linux driver tho
    • By Freddyicy
      I have spent a little time in the past few days looking around this site. I would love for someone to point me in the right direction to a forum that has information that could help me out with my problem.
       
      I have a:
       
      Alienware M17XR3 
      Windows 7 Home Premium 64-bit
      Intel I7-2820QM 2.3
      Bios InsydeH20 Version 1.0 A12
      NVIDIA GeForce GTX 460M
      (4x) 4 GB Ram
      samsung 2.5" 256 SSD (SATA3.0Gbps)
       
      It has been an amazing machine for the last 10+ years. Minor issues, nothing that an Alien Respawn could not fix, till now! On battery power it works just perfect.  Then I plug it in and it's all OK until I try to do anything, and then the screen goes white. The screen sometimes goes yellow, sometimes blue, but mostly white screen. It will do nothing until I do a hard reset (holding the power button till it turns off and turn it back on) with the power unplugged.  If the power is not unplugged then it will go through boot up to windows swirling dots then go white again. If I plug it in and do nothing I can charge it, unplug and continue what i was doing. I have tried a lot of solutions bouncing around the internet, and thought I was having a DC Jack connection issue (replaced the ac/dc power adapter, then the motherboard). I get a better connection now but with the same white screen result. I stumbled into this forum and I'm hoping to find solutions to my issues.  Then upgrade like so many others have.
       
      Any ideas, comments or suggestions welcome.
       
      Thank you in advance!
       
    • By MitjaStachowiak
      Hello,
      does anyone know, which is the chip holding the VBIOS-ROM on an AMD Pro-WX 7100?
       
      I've two AMD Pro WX 7100 which doesn't work. One has maybe a wrong VBIOS and gets deativated in BIOS before any system boots. The other one is not recognized by the MB so I suspect this one to be defective and un-soldered two chips, which I suspect to be the VBIOS-ROM:
       

       
      On earlier GPUs, the VBIOS was the chip closer to the GPU. But here, this chip has a bottom SMD contact which looks more like some power electronics...
      So before I start soldering on the probably working GPU - can you tell me, which actually is the VBIOS?

      Thanks.
       
       
    • By thinkdad
      Hi,
       
      I need help in fixing my Thinkpad.

      I just got a T440p yesterday. It was working perfectly until the following:

      I reinstalled Windows and then I installed Vantage.

      I installed all the latest drivers.
      I also choose to install the bios update. The bios update ran in Windows and it asked me to restart. After restarting, the screen was blank. I tried powering it off and on and I saw the Thinkpad logo but after that the screen was blank.

      I tried powering on and off again and there's no Thinkpad logo now and the screen is just blank with the green power on. No sound, no nothing.


      Here's what I tried:
      Pressing the power button 10 times and then holding it for 30 seconds. Unplugged and battery is detachted Detached the CMOS battery and the reattached it Removed the ram, harddisk and optical disk drive. Attached the battery and inserted the charger. I turned it on and there was a couple of beeps Tried pressing FN+R and created a bootable USB I'd like to ask: How do I fix this? What do I need to do?
      Can I reflash the bios in some other way? Do I need to buy a new motherboard? Will this solve the issue? It's my first thinkpad and I'm really excited but I was bummed out that this happened. Can you please help me?

      Thanks in advance!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.