Jump to content
pando

AW 14 mSATA or SSD?

Recommended Posts

Sorry if this is very noob but I'm getting conflicting answers to this:

 

I want to upgrade my AW 14 HD and want to go with SSD as the primary boot. What's the difference if I replace my HDD with an SSD vs. adding an mSATA? Is mSATA faster booting?

 

What I plan to do is leave the HDD as a storage only device and use either SSD or mSATA as the boot/OS. Which is better for that? And would there be any benefit to having both mSATA and SSD (other than capacity)? TIA

Edited by pando
addition

Share this post


Link to post
Share on other sites

I know this is a long dead request but I figured I'd answer it for anyone who comes across this looking for the answer. An mSATA SSD and a SATA SSD are identical. The interfaces have identical speed and you can even use RAID 0 across them to give you about 1.6x the performance (around 1000MB/s on good SSDs like the Samsung 860 mSATA and SATA drives). If you are looking to use one as a boot SSD and you have a choice, I'd go with the mSATA for an SSD as it leaves a full size HDD bay for future expansion whereas mSATA is limited in what you can install in it. Hope this helps anyone with the same question.

Share this post


Link to post
Share on other sites

just for futur reference (made a lot of research on this !)

 

the M14Xr1 has a "m.2" mini PCI-E Slot, but it does NOT Support M.2 (mSATA). even though it's the same physical connectors (Talking about the connector next to the WIFI Card on the back when you remove the back cover!)

 

now i'm not sure about the r2 Model (i think it does work on mSata?

 

now i have a cheap 'ol 120GB SSD. nothing else,

 

BUT you can replace your disk drive with a special adapter to add a SECOND HDD / SSD . but that would mean sacreficing your disk drive

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By learnfromit
      alienware 15 r2 970m with i7-6700hq vbios request so i can overclock and mess with voltage.

      BIOS version backup made with techpowerup GPU-z.

      GM204.rom
       
      or can someone re direct me to one already made that will work? all links i find are dead, thanks.

    • By Terriikk
      Hey guys, I have an Alienware m14x R2, and I have been trying to get access to the BIOS so that I can change the boot options (Everything is locked, I am unsure if someone set a password of if these are locked by default).I've tried updating the BIOS, and resetting the CMOS and nothing has changed this. Would anyone know if there are other options I can explore? Thank you. 
    • By jasonmerc
      Hey everyone!  After lots of searching it looks like this is the go-to place for laptop mods online, so I figured this would be the best place to ask something like this.
       
      I picked up a Dell E6530 for basically scrap value, and I love the thing.  Runs Xubuntu great, battery is halfway decent, and I can play 99% of the games I own on it.  My friend on the other hand picked up an E6440 with its silver-ish finish along the back.  As much as I love my 6530 I've gotta say, that thing looks great.
       
      To get to the point now, I was wondering if it's possible for me to polish the top of the lid on my 6530 to have a more silver finish like that (or maybe even a mirror finish if I sand it down with a fine enough grit).  Really what I want to know is if the dark grey part of the lid is actually metal.  I can't seem to get a definitive answer online, and I tried the magnet test on it and it wasn't magnetic at all.  This doesn't necessarily mean it's not metal though, as aluminum isn't magnetic but is obviously a sandable/polishable metal.  One source said the laptop has anodized aluminum parts on it, but they didn't specify whether it was something internal or external.
       
      Can anyone here provide me some insight?  If the grey part is definitely a metal and not a plastic, I think I'm gonna give it a try.  As stated before I got this thing for scrap value, so if in the end it doesn't work out I'm not gonna cry over it or anything.  Still though, I'd rather not run into this blind.  If this is indeed possible though and I can accomplish what I want with a decent looking result, I'll post up some pictures with the method I used for others to do as well.
       
      Thanks in advance!
    • By Geoyoc
      Hello,
       
      I have a Dell Inspiron 5555 with BIOS A12 and I am missing some options in the advance menu. The BIOS seems to be shared between the 5455 and the 5755, if it helps. Can anyone help me figure a way to have all the options in the BIOS available?
      I have attached the results archive from the backup tool, if it helps
      https://www.sendspace.com/file/x0hfsb
      Thanks in advance!
    • By IAmSteveRogers
      I have been attempting to change my boost clocks values for the longest time, though I've been unsuccessful. I managed to flash my modded BIOS, though no changes seem to have had happened, along with no errors either. Here's all the stuff I used and was able to get. If someone is able to help me with this, it would be greatly appreciated.
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.