Jump to content

Request Whitelist Removal for Clevo CO. W250ENQ/W270ENQ laptop Model


kimmy0312

Recommended Posts

hello everyone!

can somebody who are kind and intrested on removing whitelist for my Clevo Laptop Rebrand NEO ELAN From the Philippines..
i used the Universal BIOS Backup ToolKit 2.0 to backup the current bios.. the bios was so special, even the on the clevo download website they doesnt have any download links

Complete Bios Information, Clevo co. Mainboard Info, PCI ID's of the old and new WWAN w/ pictures and the BIOS Backup ROM the link provided below:
https://mega.nz/#F!Xk4zUarC!SJCzwIPEDvM4glC8nJOu4A


BIOS: American MegaTrends, Inc 4.6.5.rom

Laptop Rebrand Name: NEO Elan From The Philippines
Mainboard : CLEVO CO. W250ENQ / W270ENQ
Chipset: NorthBridge : Intel Ivy Bridge; SouthBridge : Intel HM76

 

Original Wi-Fi Card (Realtek RTL8723AE) only 2.4ghz and suck realtek bluetooth
Vendor: 10EC
Device: 8723
SUBSYS: 072610EC&REV_00


this is i wanted to replace (Intel Ultimate N 6300 AGN)
Vendor: 8086
Device: 4238
SUBSYS: 11118086&REV_3E

Link to comment
Share on other sites

Not working it gave me an error message says:

 

when i did the DOS Boot and type flashme.bat

 

Platform ; Intel (R) HM76 Express CHipset

Reading HSFSTS register.... Flas h Descriptor: Valid

 

 

--- Flash Devices Found --

SST25VF016B           ID:0xBF2541          size:   2048KB    (16384KB)

SST25VF032B           ID:0xBF254A          size:   4096KB    (32768KB)

 

PDR Region does not exist.

GBE Region does not exist.

 

Error 25: the host CPU does not have write access to the target flash area. To enable write access for this operation you must

modify the descriptor settings to give host access to this region.

Edited by kimmy0312
Link to comment
Share on other sites

We have to follow the readme, which tells us that (while on AC Adatper) we first need to execute 'meset.exe' and only begin with the flash after the automatic reboot.

Also MAKE SURE to flash the latest EC first or updating the BIOS will brick your system.

Link to comment
Share on other sites

@ bossing Prema,

                               THank you Very much sir, BIOS UPDATE Works!!!, i flash the EC 1st then the bios itself, but its still the same issue on my wifi Lan card on "Intel Ultimate-N 6300 AGN" on device manager it detecs the hardware but theres a device status and an error code saying " This device cannot start. (code 10)

 

click this link for the actual picture;

https://mega.nz/#!GtJjUbQK!ijtQLwaWsP7hYIQfc9E1T01MR2ty9QkxnIE0Deex3t0

Edited by kimmy0312
Link to comment
Share on other sites

I realy wanted to Upgrade my Wi-Fi Lan card from old and low quality Realtek RTL8723 AE. w/ the Intel Ultimate N 6300 AGN, I can provide you the PCI ID via Screenshots.. Hopefully u can help to make it work sir

 

Realtek RTL8723 AE Wi-Fi Lan Card PCI ID: https://mega.nz/#!TxhQgJhI!6tmIOdoI4268_JcvpDqo0W0_5mpEHNjgBRneDkbBVv8

 

Intel Ultimate N-6300 AGN Wi-Fi Lan Card PCI ID: https://mega.nz/#!n05A2JJJ!Z8_Ne5gyLUomuZDWIngOawM3BPWVy2v1UFvaxW5Q5PI

Link to comment
Share on other sites

You could try using the HP driver for it, but propably wifi card firmware itself is for the HP...

You could try flashing it with the generic Intel version, but no idea if flasher/firmware is available to public.

Link to comment
Share on other sites

Yeah you're Right, i red a articles regarding same situation as me, the fact about why it was not working. it was only working only on a specified laptop, like mine it was HP laptop Elitebook 8560w... theres no way to get it work on windows oS platerform, but on linux they said they can make it work the wifi lan card.. unless why youve said earlier if we can make it flash the firmware of Intel Wi-FI card from HP OEM to intel OEM i think, correct me if im mistaken

Edited by kimmy0312
Link to comment
Share on other sites

  • 2 years later...
On 4/23/2016 at 5:52 AM, Prema said:

Clevo BIOS don't use white-lists, so just flash the Clevo BIOS and be done with it. 

The correct Clevo BIOS would be the W25xEZ:

 

https://repo.palkeo.com/clevo-mirror/W25xEZ/

 

ALWAYS flash the EC first then only the BIOS!!!

 

 

Wait!  So, let me get this straight, you said that Clevo doesn't use ANY BIOS whitelistings?  O.O

 

If that's the case, I know exactly what laptop I'm going to get for my eGPU build.  OwO

 

Clevo W650KK1 w/ nvme pci-e 4x gen 3 EXP GDC Beast adapter, Core i7-6700T 4 cores, 8 threads, three GPU's total (all three being desktop grade.)

 

 

Hopefully, this isn't a dream and the age of laptops being more open to external solutions (other than thunderbolt) become more rampant and ubiquitous.

 

#hallelujah

 

And, here's a post that I did on a different forum just for reference to the same question that I had.

 

https://linustechtips.com/main/topic/945410-clevosagereluktronics-bios-whitelist/?tab=comments#comment-11513068

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.