Jump to content
EwinRacing Flash Series Gaming Chairs
Sign in to follow this  
Prokid

Toshiba Pro L630 Corei5-430m 4gb ram & PE4C 3.0(w/ GTX 960) Not Detected

Recommended Posts

Good day guys,

 

I'm still learning about egpu. Is my laptop compatible with pe4c 3.0 with gtx 960?

 

Laptop:

Toshiba Pro L630

Core i5-430m 2.53ghz

4gb ram

no pcie slot

 

vcard use: Zotac GTX 960

PSU use: Generic 600w

egpu: PE4C 3.0 mPCIE

 

Issue:

the egpu fan is spinning and I the led lights are turned on to 2 green lights. I replaced my wifi to egpu. The problem is my laptop not detecting the egpu. Sometimes it turns of my laptop after a few seconds. I tried all the combination of delay switch and the hotplug trick. Please HELP ME... thanks :D

Share this post


Link to post
Share on other sites

This is implementation Guide subforum --> ( Successful implementations on PC notebooks )

You should post a thread in provisional guide subforum --> ( These guides are a work in progress )

 

But it's okay. Nando will move this thread, immediately.

 

Did you try set delay :

- SW 1 = position 2

- SW 2 = position 1

That's work on me

 

Good luck.

Share this post


Link to post
Share on other sites
On ‎3‎/‎11‎/‎2016 at 3:37 AM, gharimanto said:

This is implementation Guide subforum --> ( Successful implementations on PC notebooks )

You should post a thread in provisional guide subforum --> ( These guides are a work in progress )

 

But it's okay. Nando will move this thread, immediately.

 

Did you try set delay :

- SW 1 = position 2

- SW 2 = position 1

That's work on me

 

Good luck.

 

 

I'm so sorry. my mistake :D

 

anyway, still not working with delay switches. Is there a way that I can force the driver to install? I tried my other laptop and it works to dell inspiron. :(

Share this post


Link to post
Share on other sites

Now, I finally installed the driver... I use hotplug trick on wifi and pe4c while in sleep mode. But when ever I restart my laptop, the driver becomes undetected again and I have to reinstall the driver.

 

I'm out of ideas for now :question:

Untitled.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By Radstark
      Title sums it up.
       
      TL;DR: we have a Clevo that runs a desktop CPU, one with those huge 82 Wh batteries. We remove the GPU and let it use the CPU's integrated graphics. How much time for the battery to go from 100 to 0? Is it comparable to an ultrabook's?
       
      I'm theorizing a mobile set with a static eGPU and an upgradable CPU. Given a hypothetical user that needs fast processing on the go and long battery life while retaining very high degrees of mobility, but at home wants a powerful machine to run most games, I guess that would be their best bet. It would surely be more convenient to keep everything in the same disk. And even though the thing would be quite heavy to carry around, changing CPU would be more cost-efficient than changing an entire laptop. (Not sure if I'm right here, and also I'm not sure whether the motherboard in a Clevo would be replaceable when the new CPU needs a different socket, which is another reason why I'm asking here.)
       
      If my above guesses aren't correct, then an ultrabook with Thunderbolt and without a dedicated GPU would be a better choice. If they are, then we would be carrying more weight in exchange of a more cost-efficient setup, which I think would be a fair tradeoff.
       
      Also I am aware of the heating problems that these laptops suffer from, at least compared to a desktop setup. Would they be solved by moving the GPU out of the chassis, and instead plugging it with an eGPU dock via Thunderbolt port?
       
      What do you think? Is it doable? If not, why?
    • By damianalex
      Hi,
      I want to show you my new project.
      I bought my laptop about 5 years ago.  It was never speed deamon, but for every day use, it was enough to me.
       
      Its specification:
      Intel i7-4700MQ
      Nvidia GeForce GT745M
      16GB RAM
      512 SSD Adata SU800

       
      Yesterday I bought Witcher 3. Of course on 1080p it's impossible to play, because of about 10fps
       
      So I make a decision to buy external grahpic card.
      I choose GTX970 and now I am looking for occasion to buy it.
       
      I've already bought EXP GDC v8.4d mPCI-E. It is used and cost about 30$.

       
      I will use ATX PSU to supply graphic card, because I have old desktop PSU at home.
       
      My plan:
      1) unlock bios
      2) buy GTX 970
      3) enjoy Witcher 3!
       
      BTW I try to cool down my laptop, so I replaced thermal paste to Kryonout Thermal Grizzly and make some tests. Temperatures and fps are on screenshots.
       
      1) laptop on table, playing GTA V 1080p

       
      - first minute (GPU core 1045MHz)

       
      -after some time, because of high temperature and GPU throlttling (GPU core drop down even to 400MHz)

       
      2) with thermalpad Glacier NC400 SilentiumPC

      - 30 minute and longer (GPU core drop to about 900MHz)
       
      3) without down case of laptop (like on picture with thermal paste) on thermalpad.
      Here laptop never drops down MHz and max temp are about 72 Celsius degrees.

       
       
      Bacause of that I bought second down case for my laptop and I will cut there additional holes.
       
      Greetings!
       
      I will describe next step when I get all stuff I need!
       
       
    • By popozitos
      Hello everyone
      I created a case for egpu using 2.5mm acrylic sheets. The first time I created a case to support a GPU + ATX psu
      Now I created another one for the GPU with an external Xbox 360 203w psu.
      the finish was not good but for my use it is already good.
       
      *both cases album
      *Construction of the second case 
      *adapting xbox psu to 8pin power (taken from 24pin)
       
      all made by hand with the tools I had.

      from Brazil.

    • By Consumerofmulch
      Hello!
       
      I have recently acquired my Dell Inspiron 15 7000, and I am interested in building an egpu setup for it. It has a USB-C port. Any recommendations/guides out there?
       
      thanks.
    • By Sparkhunter
      Hi there guys,
       
      I've been looking into getting a new GPU for my laptop (4-lane PCI-e) and enclosure (HP Omen Enclosure) but I cannot decided between the RX 5700 XT and the RTX 2070 (non SUPER).
       
      I did some price to performance calculations (higher is better) with some of the best prices I can currently get in the UK.
       

       
      The RX 5700 XT does perform better and is cheaper than the RTX 2070 (Although the 2070 does come with 2 games) but my main concern is drivers and from what I've heard NVIDIA cards work a lot better with eGPUs than AMD.
       
      If anyone has experience using both red & green or if anyone else has any other input i'd love to hear your experiences and input.
       
      Thanks.
       
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.