Jump to content
EwinRacing Flash Series Gaming Chairs
Guest

[vBIOS - MODS] Alienware - Prema Mod™

Recommended Posts

Guest

T|I and the author are no longer associated. 

For support kindly contact the author directly

 

 

 

Share this post


Link to post
Share on other sites
Guest

If you also want Prema Mod vBIOS for other AW systems, then just dump your current vBIOS with this tool and PM me the files.

 

Share this post


Link to post
Share on other sites

Hello my nameis Dmytro.

I want to download unlocked vbios Alienware M18X R2 GTX 970M Is possible?

Share this post


Link to post
Share on other sites

This is a SS of my current setup for my graphic cards atm as im not sure which bios file is the correct one to flash. Setup is a M18Xr2 on the A12 Bios with Dual GTX980M's. Anyone know which would be the best file to use dont wanna pick the wrong one and brick it accidentally.

1.gif

Share this post


Link to post
Share on other sites
Guest
On 1/11/2016 at 3:29 AM, Infini said:

This is a SS of my current setup for my graphic cards atm as im not sure which bios file is the correct one to flash. Setup is a M18Xr2 on the A12 Bios with Dual GTX980M's. Anyone know which would be the best file to use dont wanna pick the wrong one and brick it accidentally.

1.gif

 

You can either use the AW18 version or the Clevo Mod...just stay away from 361 driver as it crashes, freezes on far too many systems... 

Share this post


Link to post
Share on other sites

@Prema  I am having issues with the clevo 1.1.1 vbios in my Alienware 17 R1. I have a 980m I installed using the 3 pipe heatsink and I keep having the card overheat, but only in certain games. ie. World of Warcraft will take my gpu up to 85*C+ where as looping uniengine benchmarks or 3dmark will never take the gpu over 75*C.

I am using a Cooling pad with 2 80mm fans directly pointing at the fan intakes. I have also upgraded the gpu fan in the laptop from the stock 1.Xcfm one to the 10.6cfm model from the R3. 

I have an ASIC reading of 81.3%. What I am thinking is maybe this vbios has too much voltage applied for long term gaming for the cooling system in this machine? Will this Alienware 18 vbios help me with my issues at all or should I try a vbios with a lower 3dclock voltage? My current load voltage is 1.062v.

I am running 359.06 mobile modded inf drivers.

I honestly don't care about overclocking I just want this thing to be stable with or without my laptop cooler under it.

 

Share this post


Link to post
Share on other sites

Hello Prema, can u unlock / enable the SATA RAID in the BIOS for Alienware 15 (R1), i need to run my SSD in RAID 0 configuration, many thanks.

Share this post


Link to post
Share on other sites
Guest

I have just updated the AW18 GTX980M Prema Mod vBIOS to v2.

It'll properly support the latest NVIDIA driver releases.

 

ENJOY! :sorcerer:

Share this post


Link to post
Share on other sites
Guest
16 minutes ago, wanttolove said:

Hi Prema,

I'm using alienware 17r3 with 980m 8GB . Can I flash your vbios ?

Thanks

 

 

 

It works but for systems other than AW18 the Clevo base works best:

 

 

Share this post


Link to post
Share on other sites
17 hours ago, Prema said:

 

My 17r3 with 8gb 980m flash with MXM 8gb version or soldered 4gb version ? 

THanks

 

It works but for systems other than AW18 the Clevo base works best:

 

 

 

Share this post


Link to post
Share on other sites
Guest

Updated AW18 GTX970M Mod also to v2!

 

ENJOY! :)

 

Will look at the 17 R3 8GB BGA as soon as I find time...for now you van use the 4GB version from the R2.

Share this post


Link to post
Share on other sites
On 4/6/2016 at 3:23 AM, Prema said:

Updated AW18 GTX970M Mod also to v2!

 

ENJOY! :)

 

Will look at the 17 R3 8GB BGA as soon as I find time...for now you van use the 4GB version from the R2.

Thank you. I can't wait :)

Share this post


Link to post
Share on other sites
Guest
On 4/9/2016 at 8:18 PM, a_Criminai said:

Thank you. I can't wait :)

 

 

OK AW 15 R2 / AW 17R3 GTX980M 8GB Prema Mod is up!

 

ENJOY! :)

Share this post


Link to post
Share on other sites
On 2.10.2015 at 0:55 PM, Prema said:

If you also want Prema Mod vBIOS for other AW systems, then just dump your current vBIOS with this tool and PM me the files.

 

EDIT: AW 15 R2 / 17 R2 GTX 980M vBIOS Prema Mod added to OP. Will add the others as dumps come in.

 

EDIT2: AW 15 R2 / 17 R2 GTX 970M vBIOS Prema Mod added to OP! ENJOY! :)

 

NVFLASH_TOOLKIT_x64_PM

 

Im trying to download stuff on this site and its not working (newbie account). Tried to upgrade many times my Elite mebership, without success. Contacted one of your mods, he created some invoices but somehow my paypal doesnt accept my payment. I use my paypal for several other things, so if i could just straight forward send you some money to your account and you in exhange help me with my card (gtx980m on M17xr4 /3d), that would be great.

Please let me know.

 

EDIT: NVM got my membership now.

Edited by angelorusso_

Share this post


Link to post
Share on other sites
Guest
9 hours ago, angelorusso_ said:

 

Im trying to download stuff on this site and its not working (newbie account). Tried to upgrade many times my Elite mebership, without success. Contacted one of your mods, he created some invoices but somehow my paypal doesnt accept my payment. I use my paypal for several other things, so if i could just straight forward send you some money to your account and you in exhange help me with my card (gtx980m on M17xr4 /3d), that would be great.

Please let me know.

 

EDIT: NVM got my membership now.

 

The best public Mod for your card/system would be this one:

 

 

Use it alongside this driver Mod:

 

 

Share this post


Link to post
Share on other sites

Hello Prema.

Please help, I upgrade M18R2 GTX675 to GTX970(single), upgrade BIOS to A12 and flash  AW18_6GB_GTX970M_OC_PM_v2.rar to GTX970.

But still have 8 BEEPs after switch on laptop, is there any differences between SLI vBios and single mod?

How I can solve my problem?

Thank You in advance. 

Share this post


Link to post
Share on other sites

Hello Prema!

 

Can you please make a mod bios for alienware 15/17 R2 (2015) with RAID option selection enabled. A lot of people will thank you for it!

 

Regards!

Share this post


Link to post
Share on other sites

I am rather curious, the 970m 6GB card I got for my m17xR4 was from an Alienware 18, given the machine it is used in right now, would it be best to flash the Alienware 18 vBios for the card? I have the Clevo vBios flashed, lets me overclock and go bananas but power throttles once it hits 105 Watts. (35% TDP via GPU-Z).

 

A curiosity as I want to push this card and not worry about the wattage as much, I have a 330W Brick at my disposal and the card hits maybe 66-68 *C under load. I just want to see what this card is capable of and see how it compares to his 980m,

Edited by cskx2001

Share this post


Link to post
Share on other sites
On 22.04.2016 at 9:12 AM, Prema said:

 

The best public Mod for your card/system would be this one:

 

 

 

Hi, Prema) Could you please tell what does this mean? Tnx

980M.jpg

Edited by Red Line

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Similar Content

    • By pippocarlot
      Hello everyone! I am looking for an answer to a problem I cannot find a solution to ... I purchased an Amd wx 4150 MXM GPU module su e bay to upgrade my HP 8570W Mobile Workstation which is currently equipped with a Fire Pro M4000. Once the new GPU has been installed, the PC screen no longer turns on but works only with external monitors connected via the docking station. The same happens once the drivers are updated! If I put the old card back on, the integrated monitor starts working again ... How can I fix it?
    • By Swick1981
      Bios Release Version – v2.0.0
       

       
      Updated or Modded Items:
      A11 UNLOCKED BIOS FOR m18Xr2 (UNLOCKED BY SVL7 AND FULL CREDIT GOES TO HIM FOR UNLOCKING!)
      SVL7 Also created the PRR2.EXE tool that allows you to flash the new bios by unlocking it.  (FULL CREDIT GOES TO HIM FOR THAT FILE PRR2.EXE)
       
      Here are ALL the things I've added, modded, and enhanced on this bios -
      I've added FULL LEGACY SUPPORT ON THIS BIOS with ONE or TWO CARDS (SLI).  You can FINALLY use Win 7 OS on your machine and run the 900 series GPU's! 
      This is a MAJOR breakthrough!
       
      LEGACY SUPPORT Confirmed.  Works with 900 series GPu's in single OR SLI formation Updated the Intel RST Legacy to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated Intel RST UEFI to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated the ONBOARD Video Card for the HD3xxx to v2171 - FROM v2132 Updated ONBOARD Video Card for the HD4xxx to v2171 - FROM v2132 Updated the LAN Firmware & PXE Boot from 2.0.5.9 to v2.0.6.6 ADDED NvMe Support for m18xr2 ADDED M.2 support for m18xr2 Updated CPU Microcode to v29 for the 2900 CPU's Updated CPU Microcode to v1c for the 3900 CPU's Updated GOP Driver for Intel Sandy Bridge CPU Updated GOP Driver for Intel Ivy Bridge CPU Updated MAIN GOP Policy module for the m18xR2 Eliminated some code that wasn't used in the m18xR2 Updated CSM Module (v2) Streamline some coding to make mod(s) run a little more efficiently (v2) Added FPARTS.TXT to rar file in v2. (I had forgot to add it in v1) v2.5 to be released shortly.  I've updated a few more modules that I didn't realize could be updated.  (It's only 3 modules, but it's still an update!)   It should be released in about a week.  Hope this helps ya'll!  
      Instructions to flash:
      Use a flash drive to create a boot disk into dos Unzip ALL files into the root of the flash drive (flash.bat, r2final.bin, fpt.exe, flash.bat, prr2.exe, fparts.txt,m18r2.hdr, m18r2.hdr.bin, readmefirst.txt) BOOT INTO DOS – Note, that when you set the bios to legacy in order to boot into dos, you MAY have to reinstall OS!  (Just be prepared to reinstall no matter what) Once you boot into dos, run the file flash.bat It will unlock your bios (THANKS TO SVL7’s BIOS UNLOCKING TOOL – ALL CREDIT TO HIM FOR THIS TOOL!) Let it flash… Reboot your pc, and enjoy the MASSIVE updates!  
      Be on the lookout as I do plan to release newer version with more updates in the future.  However, it wont be for at least a few weeks as I'm now working on legacy support for the m17xR4 and several other systems.  So please be patient!
       
      ENJOY!
       
      Thread link for more information and discussion:
       
    • By svl7
      Files contained in this archive:
      FTP-DOS.zip prr2.zip M18x R2 - BIOS A03 'unlocked.zip M18x R2 - BIOS A08 'unlocked.zip M18x_R2_-_BIOS_A08_-_[unlocked]_-_[IRST 11.0.6.1702].zip M18x_R2_BIOS_A03_-_[unlocked] - [IRST 11.6.0.1702].zip M18x_R2_BIOS_A09_-_[unlocked].zip [FPT]-M18x_R2_BIOS_A09_-_[unlocked].zip [FPT]-M18x_R2_BIOS_A10_-_[unlocked]_V2.zip M18x_R2_-_BIOS_A08_-_[unlocked].zip M18x_R2_BIOS_A03_-_[unlocked].zip  
      For information on how to use the files in this archive, see here:
       
       
      My donation link in case you want to buy me a beer
    • By mrwayne
      My laptop is Monster Tulpar T7 v2.6. i7 4710MQ, 16 GB DDR3 1600 mHZ, GTX 970M 3GB.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.