I reversed the input polarity on my m15x jack after a botched psu repair. Computer worked fine, but overall power control is messed up. System only boot on both battery and psu, no battery charge, and a very low battery drain (arround 6wh).
I aways had battery issues whith my 8 years old m15x after my original battery died. Bought a new one two years ago, didn't work. Checked on upower, basically no info on manufacturer, power or history. So i refunded and used the system hooked on the psu as usual. In August i bought a new one, worked flawlessly for a day. The next day the battery died from nowere. Checked upower, bus was ok, battery was charging extremely slowly (6wh), history showed subpar disharge before shutting down. I got mad at this point, decided that psu was to blame. Opened it, checked everything, noticed some wear on the male jack. Resoldered it, connected on computer. Nothing happened, so i checked the voltage. That's when i realised that i screwed up big time. I swaped the positive and negative wires. Decided that one mistake was enough, so i sent my m15x to a trusted repair shop (latter found that they just hooked the battery and gave me back as soon as it booted, they didnt even open it). Got my pc a week later, but the battery didn't charge . Worse, it was slowly discharging (same 6wh as before), and it needed both the psu and the battery to turn on. At 65%, it worked as usual for my college semester, but the battery is dead, and so is my computer. I bellieve i burned some voltage controller or something. I'm pretty competent at soldering thing's (evem smd components) when i know what to do, and i can understand simple circuit's, but when i got my hands on the m15x datasheet i got overblown. I cant make heads or tails about it. I aways lurked this forum and i bellieve your guys are the best when it comes to finding creative solutions to technical problems concerning microelectronics. I followed a guide in this forum as a teenager to upgrade this same computer to a gtx680m, overclocked stuff, got custom bios, and had a lot of fun learning. The m15x is a deprecated platform, but it's a part of my history that i dont want to let go.
So please guys, help me.
alienware 15 r2 970m with i7-6700hq vbios request so i can overclock and mess with voltage.
BIOS version backup made with techpowerup GPU-z.
or can someone re direct me to one already made that will work? all links i find are dead, thanks.
I'm sorry for making another thread just for this but I really wanted to pick your brains on this!
I have an m15x with a 770m running windows 7 and everything works. Rock. Solid. I'm pretty happy with it. Since windows 7 is on it's way out, I would like to upgrade to windows 10. Now I've looked into it before and had a really hard time getting the 770m to behave nicely and had all these issues with green/yellow/pink screens and I remember it being a miracle I got it to work on 7 as good as it does.
My question is how well does the 970m install vs the 770m - particularly on windows 10? I would buy it in a heartbeat if it makes the install less tedious with the colored screens and all that. Especially if all the functions work on it! I have been searching the internet and I cannot find nearly as many problems with the 970m as I could with the 770m, or am I just not looking in the right places?
Thanks a million!
Hi everyone. I have had a bit of search around but I have not found anything yet pertaining to my issue. I have an Alienware 17 R1 (Late 2013 model). It originally came with an i7 4900, a GTX780m, 120hz 3D panel with intel graphics disabled. I have just got a Dell GTX980m 8GB (BIOS 84.04.2F.00.79 - Device ID 10DE 13D7-1028 05AE) and put it in and it works fine getting into windows and running 2D. However, when I run any decent 3D the graphics constantly hits power limiter and downclocks to around 800mhz. This is confirmed to be power limit in gpuz perfcap reason and this happens regardless of temperature. Running a Unigine benchmark has actually showed the card's performance to be just lower than the 780m I replaced. Using HWiNFO64 I have found that the GPU is being limited to 80 watts. It briefly goes up to over 100 watts but drops to 80.
Power Supply is 240 watt
This laptop always runs off mains power and the battery only lasts a few seconds regardless of apparent charge.
I should also mention that I have tried,
Setting nvidia control panel power management mode to prefer maximum performance.
Disabling Battery Boost in nvidia geforce experience
Setting windows power options to high performance
I have even installed a fresh windows 10 on a different hard drive and have observed the same result.
Has anyone else done this upgrade and had no issues, are there any known fixes, is this card faulty or just not going to work correctly.