sbi85 Posted December 4, 2015 Share Posted December 4, 2015 The size of the Copperplate from the GTX570M is 30mm x 20mm,when i remember right the Die Size from the GTX 970M/GTX 980M is 21mm x 21mm.Of course you can use small Stripes of Thermal Pads at the Edge.but this is not really the best Solution.The better Choise ist the Heatsink from the GTX 460M/GTX 560M because you can get this cheap and the Copperplate is much more bigger.Red : RemoveGreen: Fill with Thermall Pads Blue : Thermal Paste[ATTACH=CONFIG]16637[/ATTACH]Red : RemoveGreen : Fill up with Thermal PadsBlue : ThermalpasteThe yellow markered Spots in the other Picture is only a Information that the Copperplate is smaller.If you make all right this Heatsink is also OK[ATTACH=CONFIG]16631[/ATTACH]I've managed to buy a GTX 780 heatsink. As on the picture above also, it has a track that goes over to the CPU (I believe). Screenshot by Lightshot. How do you remove that? it is obviously not needed. Anyone has ideas? Quote Link to comment Share on other sites More sharing options...
Bloetschkopf Posted December 4, 2015 Share Posted December 4, 2015 Please don`t remove the CPU Bridge,this is for a better thermal Circuit.The Heatsink with the CPU Bridge is the better Heatsink,You only must modify it like the Picture in the right Top Corner. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.