Makinen88 Posted February 27, 2015 Share Posted February 27, 2015 I recently received Intel 7260HMW AC for my laptop MSI 16F2. Assembled. Installed drivers - no luck. shows me "This device cannot start. Error Code 10".Looks like I have to unlock Bios or something else. Can anybody help me? Quote Link to comment Share on other sites More sharing options...
nwn2 Posted February 28, 2015 Share Posted February 28, 2015 HelloThis is Correct thread for me.I have Bought Same Hardware from amazon and installed in Lenovo Y480 Laptop.Also i have installed Unlocked BIOS V 2.07 from this website. But The problem is Bluetooth not working properly.In Device manager Broadcom Bluetooth 4.0 USB showing as Yellow Triangle This device cannot start. (Code 10){Operation Failed}The requested operation was unsuccessful.Please give me solution[h=1][/h] Quote Link to comment Share on other sites More sharing options...
Unregistered User Posted March 6, 2015 Share Posted March 6, 2015 Is that the AC version of the Intel 7260? If it is I have one that works on my MS16F2 but the speed and signal sucked big time so went back to my Killer NIC 1102. Quote Link to comment Share on other sites More sharing options...
Makinen88 Posted March 9, 2015 Author Share Posted March 9, 2015 Hello gents,I've recently reinstalled OS, I've tried new and old drivers. No luck. Still code 10. Quote Link to comment Share on other sites More sharing options...
Makinen88 Posted March 12, 2015 Author Share Posted March 12, 2015 Can somebody help me??? Quote Link to comment Share on other sites More sharing options...
Makinen88 Posted March 13, 2015 Author Share Posted March 13, 2015 I have tried a lot of legacy drivers, still not working. Please help Quote Link to comment Share on other sites More sharing options...
InfectedSonic Posted July 1, 2015 Share Posted July 1, 2015 you could try taping off pin 20 and 51 on the wifi card. assuming you still check if there is a solution Quote Link to comment Share on other sites More sharing options...
Borkata Posted July 1, 2015 Share Posted July 1, 2015 you could try taping off pin 20 and 51 on the wifi card. assuming you still check if there is a solution Can you point to guide about this taping procedure? Quote Link to comment Share on other sites More sharing options...
InfectedSonic Posted July 2, 2015 Share Posted July 2, 2015 Can you point to guide about this taping procedure?https://communities.intel.com/servlet/JiveServlet/showImage/2-232968-236184/MiniPciE_PinDiagram.jpgjust place a piece of tape over the pads on wifi card so they dont contact the pins on the slot Quote Link to comment Share on other sites More sharing options...
flying2ndsky Posted September 9, 2015 Share Posted September 9, 2015 AFAIK, pin20 taping method's been used for H/W Disabled case or whitelisted case, and pin51 taping method's been used for 7260's bluetooth issue. Quote Link to comment Share on other sites More sharing options...
reishin Posted January 5, 2016 Share Posted January 5, 2016 On 3/6/2015 at 1:28 AM, solidus1983 said: Is that the AC version of the Intel 7260? If it is I have one that works on my MS16F2 but the speed and signal sucked big time so went back to my Killer NIC 1102. so, you think that 20~75 mb/s (depends on wifi interference and Access-point quality) is more slow than 15 mb/s theoretical max on N-WiFi over 5 Ghz ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.