paultje162 Posted February 4, 2015 Share Posted February 4, 2015 Hi all,My Clevo W150HRM failed when updating the bios to 1.09. Is there anyway to recover from usb stick since the laptop does not post anymore in any way. I already tried the FN+B method. but i have no idea what name the BIOS file should have.Important note: USB 2 ports are dead on my notebook(both are completely pushed in(sadly)USB 3 ports are fine.Greetings, Paul Quote Link to comment Share on other sites More sharing options...
bentomo Posted February 5, 2015 Share Posted February 5, 2015 I strongly recommend getting in contact with one of the vendors of clevo as they might have some more insight. Sager is a good one for support, it probably won't matter that you didn't buy it from them as they are pretty helpful anyway. But unless they have any other tricks tricks like a prepost method or a serial input that already is already built into the motherboard you might be out of luck. Short of replacing the motherboard or desoldering the old bios chip if you can even find one. This is usually why it's so risky to flash a bios even with a good machine, one stray gamma ray from the sun and bam the whole thing goes awry. Best of luck. Quote Link to comment Share on other sites More sharing options...
Guest Posted February 15, 2015 Share Posted February 15, 2015 Try FN+B with this file:https://mega.co.nz/#!zNVFERhR!sYPDElQ51F2Ucrb_n4q8CzjugtG7xnf_VhX0NcVo67g Quote Link to comment Share on other sites More sharing options...
Avitar Posted February 17, 2015 Share Posted February 17, 2015 If fn+B doesn't work try fn+R Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.