Jump to content

Recommended Posts

Hi guys!

I have a lenovo notebook y510p, I have obtained a ErgoStand II coolerpad to reduce even slightly its temperature, but I have not noticed significant difference, I have seen on many forums that recommend NotePal X3 for play equipment, need to know if anyone has had the oprtunidad to test both cooler and give me advice, greetings, sorry for the bad English.

Share this post


Link to post
Share on other sites
Hi guys!

I have a lenovo notebook y510p, I have obtained a ErgoStand II coolerpad to reduce even slightly its temperature, but I have not noticed significant difference, I have seen on many forums that recommend NotePal X3 for play equipment, need to know if anyone has had the oprtunidad to test both cooler and give me advice, greetings, sorry for the bad English.

I use Titan ttc-g6tz, and it works well.

Share this post


Link to post
Share on other sites

I also have Titan TTC-G6TZ and works well laptop is much cooler while gaming so I even try to overclock GPU and ist more stable on little higher frequencies with this cooling pad

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By rusTORK
      When my first CPU fan on Y500 is broke i replaced it on something compatible (non-original) and planned to replace it later on original. Since that time happened a lot things, but i still using that non-original fan. But i did some research and here is what i founded:
       
      I. ORIGINALS
       
      1. Forcecon (marked as FCN on fan)
      DFS5413005MH0T-FC1C (5V - 0.5A)
      Spotted in: Y400, Y500.

       
      2. Asia Vital Components (marked as AVC on fan)
      BNTA0612R5H-P007 (5V - 0.5A)
      Spotted in: Y410p, Y500, Y510p.

       
      3. Sunon (marked as SUNON MagLev on fan)
      MG60120V1-C230-S99 (5V - 2.25W (0.45A))
      Spotted in: Y410p, Y500.

      So, which to choose? Any recomendation? Maybe there also unexpected way (completely diffirent fan from another company for another laptop)?
       
       
    • By Webshooter38
      Hi all,
       
      I'm debating whether or not to replace the thermal paste in my Lenovo y510p. I've started overclocking a bit, and I have an external fan, but I would like to not have to run the fan as fast because it is a little loud. I have been reading a bit about different thermal pastes, and I'm wondering if there is even a big difference between stock thermal paste, and something like the liquid metal from thermal grizzly. It sounds like it'd work better, but I don't want to fall for a good marketing scheme. If anyone has experience with this and has or hasn't seen big differences, your input would be greatly appreciated.
       
      Thanks in advance!
      -Web
    • By IronPancakes
      Hey guys, first post, but I thought I’d discuss my heatsink fan retrofit in my old M14x r1. 
       
      Old fan was loud and not very efficient: the air transfer rate was around 2 cfm (I’m assuming cubic feet per minute). Finally had enough and decided to swap out the crappy r1 fan/coughing pinwheel for a r2 fan (rated at 10.4cfm). 
       
      I found an old r2 heat sink on eBay (beware though that the heat sink for the r2 will NOT fit the gpu/cpu configuration for the r1. HOWEVER, the fan of the r2 heat sink it is attached to is a carbon copy fit into the r1 MoBo. A few philips head screws and a seal of good electric tape and BAM, you’ve got a significantly cooler and MUCH quieter intake fan in your old R1. 
       
      My CPU temps from before were around 87-88 max load in FSX, 65 for the GPU; bear in mind this is after a repaste. Now with the new fan, I’m not going over 77 degrees on the CPU, and the gpu stays around 58, all while being MUCH quiter. I’ll post pics of the walkthrough if anyone is interested.
       
       Just thought I’d share with all you fellow loonies trying to squeeze every last frame and degree out of our “portable toaster ovens with a screen and keyboard”. 
       
       
    • By Henrik9979
      First I want to thank the community, who have inspired me to do this project.
      I will give you guys the chance to follow me on this journey.
       
      I hope you will all help me come up with ideas, techniques and parts that could become handy.
       
      This modding may be possible to convert to allot of laptops.
       
      Let's begin!
      Here is the measurement of the went hole.
      77mm X 16mm

       
      I have 2 ideas for what can be done.
       
    • By zaxx7
      This is my first post and I'd appreciate any help you guys can offer. 
       
      I've been using my AW M18x r1 since I bought it new. 
       
      Basics:
      I7 2760qm sandybridge
      Bios A5
      16 gb ram
      Radeon 6990m 2gb 
       
      I used to run 2 6990m's, but the primary died 3 yrs ago and I replaced it with the secondary card. Been working great until this week. 
       
      I'm using hwinfo64 for fan monitoring. 
       
      I started having lock-ups to black screen, grey screen or black with white vertical lines. I noticed my shader temp on my GPU was running out of control whenever I start  game or even run a video. The other temps seem to be in the normal range. The shader will jump from 39 C to 70 C almost immediately and then upwards from there. Over 100 C when I 1st caught it. I assume it's thermal shutdown. 
       
      I'm using the legacy driver for my card 15.7.1. 
       
      I'm willing to buy a new card, I'm looking at a 780m, but I want to figure out if it's just an issue with the card. 
       
      Any suggestions on testing for other issues? Why would it be the shader only, or is that just an issue with Hwinfo64? 
       
      Thanks in advance. 
       
       
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.