Jump to content

M18x r3 880m sli vbios


Recommended Posts

[quote=mitchellpeixer;114421

I've got a SLI 880M kit but the cards are not found by the system.

What kind of error do you get respectively where / when do you notice that there's a problem?

Link to comment
Share on other sites

thx for the reply svl7.

Well, I have a AW 18 for 780M SLI, but I dont have the GPUs anymore, so I bought a 880M SLI kit from ebay and install on my AW 18. I've tested the two 880M indepententily in my MSI GT70 and its reconize on NVFLASH just find. But when a put the 880M on my AW 18 its not reconize on NVFLASH is just like the card are not attach to the mobo. NO NVIDIA DISPLAY CARD ARE FOUND (something like that). Same on Windows, only the intel graphics are show on divece manager.

My AW 18 are using A10 bios version

Link to comment
Share on other sites

  • 2 months later...

A few things to check:

Make sure to test each card independently.

Make sure to reset (cmos battery disconnect, battery out)

Make sure you're not somehow stuck in iGFX mode (I had this happen before, and even with a reset, it still couldn't find the card(s). I ended up doing a fresh install and when I manually switched after the install, it then found the card)

Ksy, make sure to double check your SLI cable and SLI connectors. Do you have an extra SLI cable to rule out the cable itself?

Link to comment
Share on other sites

Thanks for replying electrosoft; I checked the cable it is plugged in correctly, but Gpu-Z says SLi is disabled. I currently do not have a second cable to see if the cable is bad, but I guess I will be ordering one asap lol. Maybe there is a setting in the BIOS? Which of course I cannot get into because it is locked with a password...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.