varjis 10 Posted November 21, 2014 When I bought the machine the fan on ultrabay graphics card was working. Now the fan doesn't spin. Temp rises to 97-99c and then the graphics card lowers MHz. Has anybody had this problem? Should I try the custom BIOS? Another problem is with webcam. Windows keep losing the device in Skype etc. Quote Share this post Link to post Share on other sites
octiceps 256 Posted November 21, 2014 Don't think the vBIOS has anything to do with it. Try disassembling the Ultrabay and unplugging/replugging the fan header. If your fan is dead, you'll need a replacement. If you're still under warranty, send it in.http://forum.techinferno.com/lenovo-ibm/3310-pictures-disassembled-y500-ultrabay-gpu.html Quote Share this post Link to post Share on other sites
varjis 10 Posted November 24, 2014 Don't think the vBIOS has anything to do with it. Try disassembling the Ultrabay and unplugging/replugging the fan header. If your fan is dead, you'll need a replacement. If you're still under warranty, send it in.http://forum.techinferno.com/lenovo-ibm/3310-pictures-disassembled-y500-ultrabay-gpu.htmlThe machine still has warranty and it was being fixed with Lenovo once. But they didn't fix this issue. I think I have to send it in again. Does it void warranty if I disassemle ultrabay GPU?I'm pretty sure the fan used to work. But does the Ultrabay fan spin normally if you run the dust removal?Does anybody know is the webcam issue known problem? When using Skype or Windows Camera program it keeps losing the webcam device? Quote Share this post Link to post Share on other sites
varjis 10 Posted November 24, 2014 Just noticed that when I try to run the bios upgrade (normal 3.05) I get a error. "BIOS version compare error" Quote Share this post Link to post Share on other sites
octiceps 256 Posted November 25, 2014 Disassembling Ultrabay GPU does not void warranty.Running Dust Removal maxes out the fan speed. It should be very audible. Quote Share this post Link to post Share on other sites
loki 10 Posted November 29, 2014 Disassembling Ultrabay GPU does not void warranty.Running Dust Removal maxes out the fan speed. It should be very audible.Mind providing the 'how to do yerself' tutorial?p/s: 'm new here. Quote Share this post Link to post Share on other sites
octiceps 256 Posted November 30, 2014 Mind providing the 'how to do yerself' tutorial?p/s: 'm new here.No tutorial, just remove a few screws. Very simple as you can see from the photos: http://forum.techinferno.com/lenovo-ibm/3310-pictures-disassembled-y500-ultrabay-gpu.html Quote Share this post Link to post Share on other sites
Hlfonzie 10 Posted January 4, 2015 i had to dissassamble mine and jerryrig it back together since mine seemed to have been shoddily made out of the factory, second time i pulled it out, the whole face plate came off. Quote Share this post Link to post Share on other sites
StrikeGUNxXx 10 Posted January 13, 2015 Varijs ..Enable bios back flash in bios settings. It works i you want to flash. Quote Share this post Link to post Share on other sites