Jump to content
EwinRacing Flash Series Gaming Chairs

Recommended Posts

Hi guys,

I've got an R1 M18x, and I've just swapped out two 6990m for a pair of 780m.

I flashed the BIOS to unlocked A05 before I swapped and the change seemed to go well...until I tried turning it on.

Screen black, and all I'm getting is two short beeps.

I've taken the ram out, swapped the order etc but to no avail.

Any idea what the issue could be?

Thanks for any help,

Mark.

Share this post


Link to post
Share on other sites

try flashing your card with the latest Vbios using a DOS Bootable usb and nvflash aswell try unistalling the card and using a program in safe mode to clean all old drivers including registery.

Share this post


Link to post
Share on other sites

So you think it's an issue with the vBIOS on the cards rather than something else?

Is it possible to do that even when the machine doesn't POST?

Share this post


Link to post
Share on other sites

correct just google flashing vbios with nvflash and use the modded Vbios from this forum. Also it could be conflicting drivers try using a program called DDU in safe mode without new cards installed if u have to. and try just installing one card and get it working first.

Share this post


Link to post
Share on other sites

Well Bud im assuming the op wanted a video card upgrade. And I also assume that he did not touch his ram cuz u dont need to. And maybe op just recently registered to this forum and started asking questions because op could not find any other 2 beep solutions. So I would assume its a conflict of some sort. Anyway just possible solutions in an effort to save time. They may or may not work!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By PepoJ
      Hello there!
      I am new on the forum. I'd need some help. I own a lenovo ideacentre t540-icb g, and i would need to unlock all the options in my bios, especially overclocking and thermal configuration. I tried with both amibcp and mmtool, but i didn't succeed (Error 18).
      I wonder if you could help me or give me some advice.
      Thanks in advance.
    • By Brian
      So AMD is back and in a big way, let us know which products you're most excited about and plan to build. Personally I have a 5950X, ASUS Dark Hero X570 motherboard, and soon an AMD 6900 XT GPU. First time in a very long time for an all AMD build! 
    • By pippocarlot
      Hello everyone! I am looking for an answer to a problem I cannot find a solution to ... I purchased an Amd wx 4150 MXM GPU module su e bay to upgrade my HP 8570W Mobile Workstation which is currently equipped with a Fire Pro M4000. Once the new GPU has been installed, the PC screen no longer turns on but works only with external monitors connected via the docking station. The same happens once the drivers are updated! If I put the old card back on, the integrated monitor starts working again ... How can I fix it?
    • By Swick1981
      Bios Release Version – v2.0.0
       

       
      Updated or Modded Items:
      A11 UNLOCKED BIOS FOR m18Xr2 (UNLOCKED BY SVL7 AND FULL CREDIT GOES TO HIM FOR UNLOCKING!)
      SVL7 Also created the PRR2.EXE tool that allows you to flash the new bios by unlocking it.  (FULL CREDIT GOES TO HIM FOR THAT FILE PRR2.EXE)
       
      Here are ALL the things I've added, modded, and enhanced on this bios -
      I've added FULL LEGACY SUPPORT ON THIS BIOS with ONE or TWO CARDS (SLI).  You can FINALLY use Win 7 OS on your machine and run the 900 series GPU's! 
      This is a MAJOR breakthrough!
       
      LEGACY SUPPORT Confirmed.  Works with 900 series GPu's in single OR SLI formation Updated the Intel RST Legacy to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated Intel RST UEFI to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated the ONBOARD Video Card for the HD3xxx to v2171 - FROM v2132 Updated ONBOARD Video Card for the HD4xxx to v2171 - FROM v2132 Updated the LAN Firmware & PXE Boot from 2.0.5.9 to v2.0.6.6 ADDED NvMe Support for m18xr2 ADDED M.2 support for m18xr2 Updated CPU Microcode to v29 for the 2900 CPU's Updated CPU Microcode to v1c for the 3900 CPU's Updated GOP Driver for Intel Sandy Bridge CPU Updated GOP Driver for Intel Ivy Bridge CPU Updated MAIN GOP Policy module for the m18xR2 Eliminated some code that wasn't used in the m18xR2 Updated CSM Module (v2) Streamline some coding to make mod(s) run a little more efficiently (v2) Added FPARTS.TXT to rar file in v2. (I had forgot to add it in v1) v2.5 to be released shortly.  I've updated a few more modules that I didn't realize could be updated.  (It's only 3 modules, but it's still an update!)   It should be released in about a week.  Hope this helps ya'll!  
      Instructions to flash:
      Use a flash drive to create a boot disk into dos Unzip ALL files into the root of the flash drive (flash.bat, r2final.bin, fpt.exe, flash.bat, prr2.exe, fparts.txt,m18r2.hdr, m18r2.hdr.bin, readmefirst.txt) BOOT INTO DOS – Note, that when you set the bios to legacy in order to boot into dos, you MAY have to reinstall OS!  (Just be prepared to reinstall no matter what) Once you boot into dos, run the file flash.bat It will unlock your bios (THANKS TO SVL7’s BIOS UNLOCKING TOOL – ALL CREDIT TO HIM FOR THIS TOOL!) Let it flash… Reboot your pc, and enjoy the MASSIVE updates!  
      Be on the lookout as I do plan to release newer version with more updates in the future.  However, it wont be for at least a few weeks as I'm now working on legacy support for the m17xR4 and several other systems.  So please be patient!
       
      ENJOY!
       
      Thread link for more information and discussion:
       
    • By svl7
      NVIDIA 'Maxwell' VBIOS mods
       
       
      Here you find modified VBIOS versions for the mobile parts of the Nvidia 'Maxwell' series.
      The VBIOS versions in this post are tweaked for performance and versatility. You'll get almost complete control over the performance parameters of your GPU.
      List of available VBIOS mods:
       
      Nvidia GTX 970m - 'OC edition' rev0 - >> 6 GB Version << - modified by @johnksss & svl7 -> see attachments Nvidia GTX 980m - 'OC edition' rev0 - >> 8 GB Version << - modified by @johnksss & svl7 -> see attachments  
      Screenshot demonstrating the capabilities of the 970m versions:

      >> Read the instructions carefully before flashing! <<
      If anything is unclear after reading or if you have additional remarks, please post in the thread.
       
      Flashing:
       
      - Go to the device manager -> 'Display Adapters' -> chooser your GPU, right click on it and choose disable
      - Flash the VBIOS with mnvflash, a modified version of nvflash (see attachments). Here are detailed instructions for nvflash in case you aren't familiar with it.
      - After the flashing is done: Enable the GPU once again in the device manager.
      - Reboot
       
      Do NOT use driver 347.09, it's broken and useless and won't allow you to overclock, even with the stock firmware.
      Don't distribute the files hosted here outside of Tech|Inferno. Don't modify the files you download here.
       
      Donation link in case you want to buy me a beer

      Thanks and cheers!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.