I created a case for egpu using 2.5mm acrylic sheets. The first time I created a case to support a GPU + ATX psu
Now I created another one for the GPU with an external Xbox 360 203w psu.
the finish was not good but for my use it is already good.
*both cases album
*Construction of the second case
*adapting xbox psu to 8pin power (taken from 24pin)
all made by hand with the tools I had.
I have recently acquired my Dell Inspiron 15 7000, and I am interested in building an egpu setup for it. It has a USB-C port. Any recommendations/guides out there?
I am requesting your help. I have an Acer e5-523g, and I have applied the method with h2ouve mentioned in this forum to activate the amd-v feature, and it worked. But everytime on two, when the system was shutting down, whether intentionally or low battery, the virtualization was going back to deactivate. And I always repeated the same process. Until one day: when I enter in the cmd, everytime I tap “h2ouve -gv vars.txt” or “h2ouve -sv vars_mod.txt” it shows sth like:
Now parsing Variable Information...
GetLastError=0x2 Failed to get bios data!
Fail to get Variable Information
My problem is that I don’t really know what LoadDriverDevice means, and how to make it work
Hi there guys,
I've been looking into getting a new GPU for my laptop (4-lane PCI-e) and enclosure (HP Omen Enclosure) but I cannot decided between the RX 5700 XT and the RTX 2070 (non SUPER).
I did some price to performance calculations (higher is better) with some of the best prices I can currently get in the UK.
The RX 5700 XT does perform better and is cheaper than the RTX 2070 (Although the 2070 does come with 2 games) but my main concern is drivers and from what I've heard NVIDIA cards work a lot better with eGPUs than AMD.
If anyone has experience using both red & green or if anyone else has any other input i'd love to hear your experiences and input.