kingdruid Posted January 17, 2014 Share Posted January 17, 2014 I have a y510p that i bought like 3 months ago and every couple of days I get this error and everything locks up:The IO operation at logical block address 0 for Disk 0 was retried.The error is in my event log hundreds of times. Quote Link to comment Share on other sites More sharing options...
kingdruid Posted January 18, 2014 Author Share Posted January 18, 2014 anyone have any ideas? Quote Link to comment Share on other sites More sharing options...
kingdruid Posted January 18, 2014 Author Share Posted January 18, 2014 Update my drivers yesterday but I ran into the same problem today. Quote Link to comment Share on other sites More sharing options...
jmnetus Posted January 21, 2014 Share Posted January 21, 2014 More details would be useful - what kind of drive is "Disk 0"? Check disk manager (diskmgmt.msc) - is it a cache SSD, larger SSD, hard drive?Googling the error with "logical block address 0" in particular shows that a few others with Lenovo's have had this issue and resolved it by doing a factory software reset - have you tried that yet? Quote Link to comment Share on other sites More sharing options...
kingdruid Posted January 27, 2014 Author Share Posted January 27, 2014 More details would be useful - what kind of drive is "Disk 0"? Check disk manager (diskmgmt.msc) - is it a cache SSD, larger SSD, hard drive?Googling the error with "logical block address 0" in particular shows that a few others with Lenovo's have had this issue and resolved it by doing a factory software reset - have you tried that yet?how do I reset it? I think its the ssd. Quote Link to comment Share on other sites More sharing options...
kingdruid Posted January 29, 2014 Author Share Posted January 29, 2014 I tried resetting it, but I still received the same problem. Any other suggestions? Quote Link to comment Share on other sites More sharing options...
kingdruid Posted January 31, 2014 Author Share Posted January 31, 2014 I installed the latest drivers and it hasn't happened to me for the last 2 days. Well see if its good from here on. Quote Link to comment Share on other sites More sharing options...
Sasan Posted February 1, 2014 Share Posted February 1, 2014 Try to run a bad sector detection software and see if there is any hard or soft bas sector on your disk or not. If there was any you can use the warranty for repair. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.