I have 970M 3GB version and I am looking for unlocked BIOS
I tried flashing N16E-GT_3GB_84.04.22.00.08 version that i found on this forum, however nothing changed after flash
Can someone help?
I attached the screen-shot that shows that nothing changed after flashing
Thanks in advance!!!
Hi all any solution to reset my Y500 bios password or to enable VTX without need to access bios I managed to upgrade it from 1.5 to 2.4 as explained and no way I managed to enable VTX or resetting password can you help me whether for free or paid cause i don't want to send it to Lenovo folks they will take long time may be 2 months to replace mother board and if I buy the bios chips and replacing them i can't guarantee the electronic engineer to replace it perfectly and pricking my laptop mother board ...I paid a high price for this laptop and don't wanna lose money again buying new one thanks in advance
Hi to everyone,
It seems that the BIOS of my alienware has been broken . How can I do the bios recovery?? Thanks in advance!!
By Jim Zhang
This is my first post, and as the title says, I am a latptop newbie, with the MSI GE60-0ND-257US being my first laptop of any description.
I heard that this laptop runs quite hot, and have experienced such heat while gaming and am wondering on how I should maintain it.
If you have any tips on cleaning, tweaking, or suggestions on, well anything really (laptop coolers, keyboard/screen wipes, cleaingin equipment, DO's and DON'T's)
it would be much appreciated.
By Jim Zhang
It seems that the majority of posts I have seen so far pertain to the gt series in regards to modded BIOS', overclocking, unlocking etc.
I was wondering whether anyone had any tips on undervolting the 660m on a GE60-257US laptop, and undervolting the i7-3630Qm.
I have read that, in order to undervolt, or even adjust the voltage of the 660m in a GE60, one must use a modded BIOS, and I have seen nothing on undervolting the cpu.
I was following a mod thread posted on the laptopreviews forum by Forge, found here:
GE60 Optimization/Benchmark/Modding Thread
but Forge has since put his GE60 up for sale ( which I would very much love to buy, but alas am an international user )
Thus, there is no new info on the matter. The reason for my interest in undervolting, other than being something techy and cool, is my desire to keep my laptop cool, which is notorious for running ludicrously hot (in the 90-94C range on both cpu and gpu) when gaming or anything resource intensive. The warranty for my laptop is limited and I can't get a better warranty (can't even open the back panel by the looks of things now), so adding copper blocks, sheets and re-pasting is out for the moment. I can't even find a registered serviceman in my area (Auckland, New Zealand) that will stick an mSATA SSD in the thing.
If you have any tips, or possibly can link me to a person/company in NZ that could help with upgrades/ modding while keeping tghe warranty, it would be much appreciated. (also, Thank the heavens for the auto-save function! I timed out while writing this )
EDIT: Here is the link to the latest BIOS (hopefully it works):
I will post a screenshot of GPU-Z as soon as my USB drive is found (or when my new one gets here).
Here is the screenshot of GPU-Z with the BIOS updated: