Jump to content
EwinRacing Flash Series Gaming Chairs
john.daggett94

Android and Windows Tablets by Dell

Recommended Posts

I found new news about Dell here at techgreet that Dell has introduced some new windows and android powered tablets for users. Is this a good move by Dell, Is Dell trying to increase its market share? What do you think, will users buy these tablets? i like Dell laptops but seriously i never thought about buying a tablet from Dell.

Share this post


Link to post
Share on other sites

Dell sent me a Venue 11 Pro awhile back, the thing was nothing but problems, random power off, wouldn't wake from sleep, loud as hell

Eventually they replaced the motherboard with a new revision, which seemed to fix the random power off

But still wouldn't wake from sleep, the Venue Pro 8 though, that was solid, it was a little on the slow side it having an ATOM CPU and all

But it never crashed, battery life was like a week which is insane.

Share this post


Link to post
Share on other sites

I have Venue 8 and I am very suprised that quality and speed. It cost not much money and it is Dell. I think that this is good very good offer.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Awesome14
      Over the last 10 years I've found laptops throttle the processor speed in order to keep fan noise down. I prefer the fan to run noisily, and the processor to run at full speed. I've developed tried and true mods for lappies and have demonstrated their effectiveness.
       
      I have two Lenovo W541 laptop workstations with I7-4940MX processors and discrete nVidia graphics. On one I overhauled the cooling. Copper shim between CPU and hsf, AS5 on both sides. Shims between hsf and inductors near CPU and gpu, and shim on the gpu.
       
      Used 'thinkpad_acpi' Linux kernel module to set fan to max speed. Ran mprime (prime95 for Linux) AND Unigine Heaven, alternating,  to cure the AS5. Then ran mprime. Temps were slightly high. But laptop processors tend to run hot. 
       
      The I7-4940MX is a 3.1 GHz, 4.0GHz. Turbo processor. The modded machine ran at 3GHz. continuously running mprime, for weeks. The unmodded machine with the same max-fan-speed software tweak and stock thermal-interface material, throttled to 1.7GHz.  at the same running temps.
       
      Clearly, laptop manufacturers are robbing performance off the top, by inferior cooling hardware and materials. Granted, getting the cooling mod to all fit together correctly with smooth, flat surfaces requires hours of work and materials not normally found sitting around the house.
       
      I normally do not mod the CPU die. I abrade copper surfaces down to 1500 grit paper, and then polish with scapings from a bar of buffing compound. Everything is done on 1/2" plate glass to maintain flatness. The final mirror polish is done with the compound granules on a clean, damp cloth.
       
      Desktop processors mostly have slightly raised corners, so smoothness is not as much of concern. You're going to get thermal-interface compond completely covering the center of the processor. The ideal is to fill the microscopic gaps between the cpu die and the hsf, but where there is metal on metal, have it be. 
       
      Metal to metal provides 100s to 1,000s times the heat transfer of thermal paste. But, on a desktop, there are more effective cooling solutions than moving air. Most user are satisfied with their laptops, because the processor doesn't run full speed long enough to make a difference.
       
      But I enjoy tweaking, and I do processor-intensive work, like batch editing 100s of large images, video rendering, security testing, password recovery, network testing; that are all severely compromised by poor, stock laptop cooling solutions.
    • By mx90
      Hello, I've got a Quadro M2200 (GPU: GM206GL-A Revision A1, and MxM 3.0a Maxwell card) with the following bios: 84.06.76.00.1C
       
      I've read that this card is very similar to the GTX 965m, but that it has been underclocked considerably. It seems to be a good candidate for unlocking since I hardly see the temperature exceed 70C as-is. I'm requesting help with this - I'm not sure if it's possible to simply flash the vbios from a Dell GTX 965m (MxM 3.0a) or if some type of edit of the card's current vbios would do the trick. I'm hoping someone could help me out with the specifics of doing such an edit if that's the case. 
       
      Thanks!
    • By Lisa Scott
      Sometimes, our Computer becomes very slow and gives tough time to make work on it. This makes slow because of hard drive holding the plenty of data, files. So, to make faster speed clear the some space.
      Some background applications or programs running make computer slow.
      Remove or disable any TSRs and startup programs that automatically start each time the computer boots. 
      Scan for Malware and Adware, if your system infected by them.
      Uninstall Programs You Don’t Use
       
    • By Consumerofmulch
      Hello!
       
      I have recently acquired my Dell Inspiron 15 7000, and I am interested in building an egpu setup for it. It has a USB-C port. Any recommendations/guides out there?
       
      thanks.
    • By jasonmerc
      Hey everyone!  After lots of searching it looks like this is the go-to place for laptop mods online, so I figured this would be the best place to ask something like this.
       
      I picked up a Dell E6530 for basically scrap value, and I love the thing.  Runs Xubuntu great, battery is halfway decent, and I can play 99% of the games I own on it.  My friend on the other hand picked up an E6440 with its silver-ish finish along the back.  As much as I love my 6530 I've gotta say, that thing looks great.
       
      To get to the point now, I was wondering if it's possible for me to polish the top of the lid on my 6530 to have a more silver finish like that (or maybe even a mirror finish if I sand it down with a fine enough grit).  Really what I want to know is if the dark grey part of the lid is actually metal.  I can't seem to get a definitive answer online, and I tried the magnet test on it and it wasn't magnetic at all.  This doesn't necessarily mean it's not metal though, as aluminum isn't magnetic but is obviously a sandable/polishable metal.  One source said the laptop has anodized aluminum parts on it, but they didn't specify whether it was something internal or external.
       
      Can anyone here provide me some insight?  If the grey part is definitely a metal and not a plastic, I think I'm gonna give it a try.  As stated before I got this thing for scrap value, so if in the end it doesn't work out I'm not gonna cry over it or anything.  Still though, I'd rather not run into this blind.  If this is indeed possible though and I can accomplish what I want with a decent looking result, I'll post up some pictures with the method I used for others to do as well.
       
      Thanks in advance!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.