After a long wait, Tech|Inferno now has a Marketplace/Classifieds section where all registered (promoted and above) members can participate in selling, trading and seeking out items. This service is free to all members to use as they wish. Currently all ads last for a period of 14 days before they expire for promoted users. Those users belonging to T|I Elite, Contributor, Developer and Moderator have access to 30 day ad periods that are featured Some easy rules to remember: Do not post multiple ads of the same product. Do not advertise here if you are a retailer or business. You must contact Tech|Inferno for advertising space. Keep ads civil, do not try to lowball members. You may contact them in private via PM if you feel their price is not to your liking. Harassing members will result in an infraction. It is recommended you have Heatware/eBay feedback to establish trading credibility. Tech|Inferno assumes no liability for any sales posted in the Classified section. Always use common sense when buying/selling with traders and ask for their heatware/ebay feedback! Enjoy!
I've been reading the forums for quite a while now, and I can't even describe how helpful everyone at techinferno is.
It's time for my first post and my question is towards the GPU vBios and Alienware/Clevo gurus here at techinferno.
I've bought a barebone Origin EON 15-X (Clevo p750dm) it's the Skylake version. I also have an MSI GTX970m 6GB which doesn't seem to be working when installed in the 15-X (black screen not even backlight, only the keyboard backlight is working, no fans are spinning and there are no beeps). I think it might be due to the MSI vBios. I want to try to flash the card with a Clevo vBios (thanks to Prema) and see if the card would then work.
I was hoping I can use my trusty M18x r2 for that task.
In the primary GPU slot I've got my 7970m and in the slave slot I've put the 970m. When I power the laptop and go to the bios, it only shows "ATI GFX" for "Discrete Graphics 1 and for "Discrete Graphics 2" shows "Not Detected". I've tried booting to Windows and checked the device manager, same thing only the 7970m is listed.
I'm not sure if what I'm trying to do is even possible.
Any help will be greatly appreciated. Thanks in advance
Does anyone know if I can smack 2x16gb(32gb) ddr3l sodimm into the y510p without issue?
Yes the documentation states it's upgradable to 16gb maximum, but surely that's bs, I mean the 4700Mq is capable of 32gb RAM so what's the problem?
I read some speculation online on various forums, but can anyone confirm it is possible? I'm just scared to buy the RAM if it's not going to work.
InB4 "you don't need that much RAM"
What is up. Emailed Sager about latest bios and they sent me one. Suppose to provide support for Kabby lake 7XXX series processors as well as optimization for crappy WIFI cards that aka (cough cough KILLER) le'ts not point fingers here XD. File is below. Gotta flash through USB... there are plenty tutorials out there how to do but here are instruction from the email I got.
Rename the attached file to 9870BV08LS2.7z(Done it for you already)
Unzip the 9870BV08LS2.7z to a USB flash drive.
When the screen turns black, keep tapping F7.
Select enter setup on the boot menu.
Pull down the exit menu in the CMOS setup.
Launch EFI shell from filesystem device.
The Startup.nsh will flash the BIOS.
Note. Sager Computer does not take the responsibility if the computer does not work after you updated the system BIOS & firmware by
yourself. ( Neither do I)
Hello, i have barebone laptop MS-16F3. I buy this from computer seller company with brand name Forsa. I think this company just import this laptop and rebrand it. The real name is Rabook Firebook F640.
Okay, i want to ask, can i update my BIOS Laptop with MSI GT60 BIOS? Because i can use the driver for MSI GT60.
Sorry for the bad english, thanks for respond