Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoticons maximum are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By DgknGkdn
      The computer I used was '' Lenovo Y510P ''. There is a '' Nvidia GT755M [SLI] '' as a display card. I have tried both ways of downloading the video card driver from both GeForce Experience and Nvidia driver site. Both kinds of graphics cards are starting to update. Later, the 'graphic driver is installed' part of the screen goes and never comes again. I can not enter Windows when I turn off the computer. I have to take format from scratch.

      After formatting, Windows automatically loads a graphics card driver in 2017, trying to update the driver again, it stays black on the screen again. I have to format again.

      With DDU (Display Driver Uninstaller) program, I deleted the old video card driver and updated it again. But I met the same problem.

      I communicated with Nvidia and stated that I had such a problem. They asked me not to install the 388.13 video card driver. That graphics card driver has been loaded without any problems. But I have the same problem with all the video card drivers out there.
       
      NOTE: This problem only happens on Windows 10. I can update the display board without any problems in operating systems like Windows 8,8.1.
       
      NOTE: I have been having this problem for about 2 months, before I could update my display card in Windows 10 without a problem.

      The driver I am currently using is: 388.13
    • By moaker
      I dont know if this is the right forum to post this,  (but i need 5 posts for downloading a  vbios)
       
      so my questions are these, thank you in advance for reading
       
      I have bought a laptop with a half melted 880M GPU Im assuming the person did not keep an eye on temps,
      so i went and replaced the card, it runs fine, (alright) but still, I remember modding my VBIOS for my 680 GTX back in the day, and it was fine, exceptionally faster, 
      and im looking for that 60 fps LOCK, like i got on my 680 after modding the vbios, 
       
      I did increase the voltage on the card to 1.212 I believe, from 1.114 ,
       
      anyway I considering modding the cooling system as well for this laptop, because it definitely lacks cooling 
      My plan is to put another laptop fan (where the HDD1 bay is in the Alienware 17) bcause I removed that hdd it was constantly at 57c which is bad
      even think it suffered some damage as speeds on it for specific games and tasks are pretty long, and it stays at 100% some times, which is weird, but it still works, so im using it.lol
       
      , but in the meantime, I turned the laptop upside down, plugged in the HDMI cable, and now im blasting a ROOM fan at it, which is definitely helping with temps
      before I would try to throttle the gpu speed at 77C, or 73C depending on the game or even saying screw it, I dont want throttling, and putting the throttle point to 83C,
      I use SPEEDFAN , and it helps keep the laptop relativly cool, except when the gpu is under full load,  putting my hand on it is ridiculously hot, so, with the fan on it, its not going above 70,
      and taking a LONG time to get up there, 
      i am playing metro last light at around 60C at 60+ fps, where as before my temps were shooting upto 80 and it would hit the throttle point, so  seeing as how this is a 120 HZ laptop, I rather not push it, since the card is not capable (and if it is, the cooling sure isnt)
       
      the plan is to put the fan inside the HDD1 bay, and POSSIBLY  daisey chain it to either A) the cpu fan header, or  B ) the gpu fan hjeader, 
       
      QUESTION:
      not sure which "rails" the power for these comes from, would it be able to handle another fan???
      it seems like a legit idea, seeing as how the rear of the heatsink has NO heat dissipation at all. which is the part that melted offcausing the old  card to die in the first place.
      basically the thermal pads look like they gunked the card and it was unfixable, I have a post to it on the Alienware Forum, which i could link later,
       
      is it a good idea, and will the VBIOS WORK with my 880M (DELL) from a clevo, (now in an alienware) im assuming they are compatible, as long as they are dell.
      also would I be able to get a Y adapter for the inside of a laptop fan, that would be AMAZING, i know they sell them for Desktops.
      Thanks
       
       
    • By heyitsme8717
      Recently obtained myself a bricked Y410P after undervolting my CPU, using svl7's bios mod on TechInferno. If you only take one thing away from this post, it should be the fact that 
      NEVER SHOULD YOU EVER UNDERVOLT A LAPTOP CPU FROM A MODDED BIOS. Hindsight is never 20/20.
      Anyways, back to topic! 
       
      I went and purchased my self one of these, in hopes of to re-program my sad bios. So far no good. 
       
      I am wondering if anyone out there have had any success with this approach. Please share your journey here!
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.