Jump to content
EwinRacing Flash Series Gaming Chairs

Recommended Posts

Hi

Can you please post a modded bios for Asus G551JW , Because this model is extremly ugly comapring with other gaming laptops

So what exactly you need to start modding it ?

Share this post


Link to post
Share on other sites
@Klem

please give a comment about my post :)

I dont know anything about this. Only Prema can help you, he is expert in Clevo based mashines.

  • Thumbs Up 2

Share this post


Link to post
Share on other sites

Hi, 

Dell Inspiron 15 7559

i7 6700HQ GTX960M 4GB

I dont want to steal your time. My only wish is an unlocked vBios :)

https://www.dropbox.com/sh/bdyvxt5j0qbrtqa/AADuZOhKm_Plxv2h8fyNsZN1a?dl=0

 

EDIT: 

"Boot Guard" bricks Broadwell and Skylake Laptops with enabled "Verified Boot" when trying to flash unsigned BIOS.

Error:

Boot Guard verified DXE that is fail
System will shutdown
Press any key

Edited by DasPez

Share this post


Link to post
Share on other sites
11 hours ago, Klem said:

Send me your vbios. I will look.

I left a link to my bios in the post :) 

 

And if i'm trying to send a PM to you there is info: " Klem cannot receive messages. "

Edited by Dushnik

Share this post


Link to post
Share on other sites
9 hours ago, Dushnik said:

I left a link to my bios in the post :) 

 

And if i'm trying to send a PM to you there is info: " Klem cannot receive messages. "

:)  If you look some my previous posts on this page, then you can see my email. 

Share this post


Link to post
Share on other sites
21 hours ago, Klem said:

Send me your vbios. I will look.

I left a link to my bios in the post :) 

 

Sent :) Thanks in advance for your reply

Share this post


Link to post
Share on other sites

Hi. I've got MSI GE60 Apache with GTX850m. It has already bios with unlocked 135 mhz limit. However, my overclocking capabilities are very limited because of relatively low core voltage compared to other laptops with this chip (Mine is 0.95v, rest are 1.1-1.2v. For example, very similar Apache Pro with 1.125v 860m has much higher OC headroom according to one of YT video). Even the slightest change of voltage results in big core clock throttling and it's caused by too restrictive power limit. Can I ask somebody to raise this limit or remove completely ? Of course I can pay if it's needed. Thanks :)

 

Edited by amEX

Share this post


Link to post
Share on other sites
17 hours ago, amEX said:

Hi. I've got MSI GE60 Apache with GTX850m. It has already bios with unlocked 135 mhz limit. However, my overclocking capabilities are very limited because of relatively low core voltage compared to other laptops with this chip (Mine is 0.95v, rest are 1.1-1.2v. For example, very similar Apache Pro with 1.125v 860m has much higher OC headroom according to one of YT video). Even the slightest change of voltage results in big core clock throttling and it's caused by too restrictive power limit. Can I ask somebody to raise this limit or remove completely ? Of course I can pay if it's needed. Thanks :)

 

Hi! Send me your file backup of bios. I will look it.

Share this post


Link to post
Share on other sites
On Sunday, December 20, 2015 at 10:16 PM, grossy34 said:

Hello can i ask about gtx770m OC Vbios?
 

https://drive.google.com/file/d/0Bw5agrH-sjMZQklOcHFMUDVfTUk/view?usp=sharing

 

and can somebody help me how and where to rename that thing to  nvidia gtx770m i had to install a mod inf file in my g73sw and now that name appears

 

hbj.gif
image hosting free

Will anybody help me with that ?

Or that forum is dead?

Share this post


Link to post
Share on other sites

Hi

 

Maybe this is not the place to request this, but maybe someone can help. I just installed a nvidia 880m in a MSI GT70, and the nvidia installer is not detecting the card. I need the modified driver so I can run the installer. Im willing to pay, just need your help with the modified inf driver and the correct driver version to download from nvidia. 

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By AMan
      Hi,
       
      I recently bought the new Toshiba RC100 m.2 2242 NVMe SSD for my Lenovo Y510p which has an m.2 port in it.
      After installation the SSD wasn't showing up in my BIOS and also not on my OS Win 10 disk management. So I did a bit of research and installed mod BIOS for my Y510p by following the steps in the link: ( https://www.techinferno.com/index.php?/forums/topic/3546-lenovo-y410p-y510p-unlocked-bios-wlan-whitelist-mod-vbios-mod/ )
      There are a lot more options in the BIOS menu now.
      Even after doing the mod it's not showing up. The SSD works on my friend's "new 2017 dell gaming laptop" which has m.2 ssd support in it. I don't know what exactly to configure my BIOS to make it work. I've just done some hit-and-trial configs which have eventually failed.
      If someone can help solve it Pleasee!!
       
       
      P.S. : I can share all the available options available in the BIOS if required.
         
    • By High_Voltage
      In case you own a Lenovo Y410p or Y510p laptop, you might be interested in upgrading its performance by installing an external graphics card. Ultrabay eGPU adapter designed by @gerald was proven to be a convenient plug-and-play option to do exactly that. However, for a long time only an AMD-branded GPUs could be used due to limitations in the Lenovo's stock BIOS. The purpose of the modified firmware presented here is to expand the range of available GPUs by enabling Nvidia support on Gerald's Ultrabay eGPU adapter.
       
      Huge thanks to:
      @MWichni - For efficiently assisting me during the development of this mod. By flashing dozens of BIOS builds over the course of several weeks and thoroughly describing the effects observed (or the lack thereof), he enabled me to fully understand necessary parts in BIOS structure and come up with a final solution. @svl7 - Whose unlocked BIOS / Whitelist mod has served as a basis for this modification. His discovery of a security hole in V2.07 BIOS has provided us with a convenient BIOS flashing method that does not require a physical programmer. The Unlocked BIOS and WLAN whitelist mods originally designed by him are also implemented in this BIOS mod. @gerald - For designing the aforementioned adapter. Without it, all this work would make very little sense.  
      Key features:
      Resolves the "40-second reboot" issue normally encountered while using Nvidia graphics cards with Ultrabay eGPU adapter, thus allowing all Nvidia cards to be used. Based on the latest V3.08 BIOS. Includes Svl7's WLAN whitelist removal mod - for the convenience of aftermarket WLAN card users. Includes Svl7's BIOS debug menu mod - for the ease of experimentation with newly available features, e.g. attempting to use Nvidia Optimus to pass eGPU video back to laptop's display.  
      NB! Svl7's Debug Menu is not a toy! It contains a lot of options that are either not supported or partially supported by the hardware platform and/or can disturb its normal operation or prevent the PC from booting up at all. Any of the entries not originally present in the stock BIOS should be modified at your own risk!
       
      DISCLAIMER:
      ANY MODIFICATIONS YOU ARE APPLYING TO YOUR HARDWARE ARE PERFORMED AT YOUR OWN RISK! AUTHOR OF THIS MOD DOES NOT HOLD ANY LIABILITY FOR LOSS OR DAMAGE RELATED TO USING THIS SOFTWARE.
       
      Screenshots:
       
      Installation instructions:
       
      If things don't go right:
       
      Error 43:
      If you intend using the GTX10XX-series Nvidia card as the eGPU (which you probably do), you are very likely to encounter the infamous Error 43 in Windows Device Manager. This is a widely known issue in the eGPU community and is not related to this particular mod in any way. Following this guide thoroughly will in most cases resolve the Error 43 issue.
       
      Download:
      Get your copy here!
       
      P.S.:
      Version of this mod for Lenovo Y400/Y500 models is coming soon!
       
    • By GastStraus
      Hi, I started overclocking my laptop. Initially, the graphics card provided 601 MHz at core (900 mV voltage) and 1400 MHz at memory. By moddig the bios through the Kepler Tweaker, it was possible to overclock to 944 MHz at core (925 mV voltage) and 2310 MHz at memory.
      I want to reach 1 GHz by the core, but for this I need to raise the voltage. At a very high voltage, even without load, the fan will start to rustle, so I do not want to raise the voltage much.
      But there is an idiotic problem. When the temperature of 60 degrees is used, the video card discards 25 mV. This is Nvidia`s feature . In the stock, it drops from 925 to 900, now from 950 to 925. I want 950 constantly, but it's impossible to make through Kepler Tweaker. I saw reports that svl7`s BIOS mod does not have this problem, but anyway I can not download it. So may be somebody know how make right vbios mod.
    • By Centurion
      Hello guys ,
      After modding my bios with svl7's mod to my y510p with gt755m, everything went fine except one thing.My default gpu's core clock shows 1098 and the ultrabay gpu's core clock shows 980.Also range of overcloking is wider on the default gpu than its on the ultrabayed one.I have done that nvflash thing on the second post either.I hope you can make me understand the reason behind this and help me solve the problem.
       
       


    • By Swick1981
      Bios Release Version – v2.0.0
       

       
      Updated or Modded Items:
      A11 UNLOCKED BIOS FOR m18Xr2 (UNLOCKED BY SVL7 AND FULL CREDIT GOES TO HIM FOR UNLOCKING!)
      SVL7 Also created the PRR2.EXE tool that allows you to flash the new bios by unlocking it.  (FULL CREDIT GOES TO HIM FOR THAT FILE PRR2.EXE)
       
      Here are ALL the things I've added, modded, and enhanced on this bios -
      I've added FULL LEGACY SUPPORT ON THIS BIOS with ONE or TWO CARDS (SLI).  You can FINALLY use Win 7 OS on your machine and run the 900 series GPU's! 
      This is a MAJOR breakthrough!
       
      LEGACY SUPPORT Confirmed.  Works with 900 series GPu's in single OR SLI formation Updated the Intel RST Legacy to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated Intel RST UEFI to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated the ONBOARD Video Card for the HD3xxx to v2171 - FROM v2132 Updated ONBOARD Video Card for the HD4xxx to v2171 - FROM v2132 Updated the LAN Firmware & PXE Boot from 2.0.5.9 to v2.0.6.6 ADDED NvMe Support for m18xr2 ADDED M.2 support for m18xr2 Updated CPU Microcode to v29 for the 2900 CPU's Updated CPU Microcode to v1c for the 3900 CPU's Updated GOP Driver for Intel Sandy Bridge CPU Updated GOP Driver for Intel Ivy Bridge CPU Updated MAIN GOP Policy module for the m18xR2 Eliminated some code that wasn't used in the m18xR2 Updated CSM Module (v2) Streamline some coding to make mod(s) run a little more efficiently (v2) Added FPARTS.TXT to rar file in v2. (I had forgot to add it in v1) v2.5 to be released shortly.  I've updated a few more modules that I didn't realize could be updated.  (It's only 3 modules, but it's still an update!)   It should be released in about a week.  Hope this helps ya'll!  
      Instructions to flash:
      Use a flash drive to create a boot disk into dos Unzip ALL files into the root of the flash drive (flash.bat, r2final.bin, fpt.exe, flash.bat, prr2.exe, fparts.txt,m18r2.hdr, m18r2.hdr.bin, readmefirst.txt) BOOT INTO DOS – Note, that when you set the bios to legacy in order to boot into dos, you MAY have to reinstall OS!  (Just be prepared to reinstall no matter what) Once you boot into dos, run the file flash.bat It will unlock your bios (THANKS TO SVL7’s BIOS UNLOCKING TOOL – ALL CREDIT TO HIM FOR THIS TOOL!) Let it flash… Reboot your pc, and enjoy the MASSIVE updates!  
      Be on the lookout as I do plan to release newer version with more updates in the future.  However, it wont be for at least a few weeks as I'm now working on legacy support for the m17xR4 and several other systems.  So please be patient!
       
      ENJOY!
       
      Thread link for more information and discussion:

       
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.