jon7701 15 Posted September 12, 2014 Just download MSI Afterburner and you will be able to overclock your gpu a bit. Intel extreme tuning utility if you want to overclock your cpu as well. Quote Share this post Link to post Share on other sites
Jason335i 11 Posted September 17, 2014 Just download MSI Afterburner and you will be able to overclock your gpu a bit. Intel extreme tuning utility if you want to overclock your cpu as well.I should have said I'm interested in undervolting the GT750M. I've already got the CPU undervolted with XTU, and I'm running SVL7's 3.05 molded bios. Quote Share this post Link to post Share on other sites
snoopy6489 10 Posted September 17, 2014 or the Y510P Quote Share this post Link to post Share on other sites
jamescc 14 Posted September 24, 2014 Just to share, my Y400 GT750m is on Furmark test result:Core clock: 1058Memory clock: 1249Max Temp: 83CVoltage: 1.081 VIs my voltage a little low compared to others? Quote Share this post Link to post Share on other sites
maak 10 Posted September 26, 2014 I DID overclock to gf 650m at 935 MHz & memory at 2400mhz with original bios & power setting .....the temperature increases dramatically till 83 c then it never crosses 87c with lap cooling fan .........the card is stable under heavy games especially crisis 3 he runs it great ....so my next step to mod bios&more power &some modification it will be premier card like GTX . Quote Share this post Link to post Share on other sites
GTMoraes 10 Posted September 28, 2014 Can't get past 135MHz overclock on my SLi 650M setup. Guess it needs a BIOS mod? I'm kinda scared about it. Quote Share this post Link to post Share on other sites
hayden55 4 Posted December 26, 2015 (edited) Just for kicks until my eGPU comes in i overclocked my 750m in my y510p to play black ops 3 on 1080 between 30-45 fps. Went from 1058MHz to 1280MHz. Granted this would DEFINITELY overheat on Crysis in about a minute, black ops 3 doesn't run hot at all and it gave me a solid boost. And i didn't overclock the memory because the card's ram isnt being maxed out so I figured i didn't need the extra heat. So a solid 222MHz overclock with a 12.5mV overvolt! System: y510p i5-4200m Single 750m fan speed wire clipped for 100% speed fan shroud trimmed to match radius of fan for better flow. All the dust filter material has been removed. Max GPU: 81C Max CPU: 62C All in all not bad. I tried a +25mV with the same settings but I was about to overheat pretty quickly. lol My sig stuff hasnt been done yet. Stock heatsink for the moment, stock i5. no repaste etc... Edited December 26, 2015 by hayden55 Quote Share this post Link to post Share on other sites
zVag` 11 Posted January 14, 2016 nvidia inspector Quote Share this post Link to post Share on other sites
JayDieu 11 Posted January 28, 2016 Once I flash the modded bios, I can just use nvidia inspector or msi afterburner to oc right?? Quote Share this post Link to post Share on other sites
kai902000 0 Posted July 5, 2016 Good info here, im trying to overclock my y500, but scared of overheat issue, seems like is still ok for everyone. Quote Share this post Link to post Share on other sites
divinitous 0 Posted July 6, 2016 Cant wait for access to download the bios unlocker. I just got a the 650M SLI card to addon. Quote Share this post Link to post Share on other sites