Jump to content

Recommended Posts

Some more pics posted by a chinese site:

post-5-14494995372517_thumb.jpg

post-5-14494995372933_thumb.jpg

post-5-14494995373243_thumb.jpg

Share this post


Link to post
Share on other sites

Question is will svl7 bless 780 owners with a custom bios with GPU Boost removed?

Share this post


Link to post
Share on other sites

Just bought it 2 weeks ago,saved a lot of money to buy this but it's a total worth.

I bought it because good SLI profile with Far cry 3...Nvidia is messin' with those too much and for nothing really :|

And with this beauty my windows 7 note raised up to 7.1 :)))

Share this post


Link to post
Share on other sites
Just bought it 2 weeks ago,saved a lot of money to buy this but it's a total worth.

I bought it because good SLI profile with Far cry 3...Nvidia is messin' with those too much and for nothing really :|

And with this beauty my windows 7 note raised up to 7.1 :)))

What is your 7.1 score? I get a 7.9 graphics rating on my 660Ti, so I'm guessing you have a 7.1 due to something else.

Share this post


Link to post
Share on other sites

Sounds like there might be some kind of bottleneck in his system. The base score for WEI is always the lowest number.

Share this post


Link to post
Share on other sites

I have the Gigabyte GTX 780 Windforce edition. It's really a great card and blows everything away at 1080p. I've had a lot of issues with BF3 and 320.18/320.11. I've read to do a clean install which I tried but still got artifacting (I deleted registry keys and hidden folders, etc...). I had to roll back to 314.22 and modify the inf file. Anybody else run into problems with BF3 on the GTX 780. And what do people use to OC nowadays? I've always been partial to MSI Afterburner but I would switch if something worked better.

Share this post


Link to post
Share on other sites

Just got mine, hit +200Mhz Core/Memory with stock volts, now trying to flash it.

Share this post


Link to post
Share on other sites

Hi!!

Yesterday came!!,here are the mine:

ybeo.jpg

First Benchmarks

image_id_979374.jpeg

image_id_979372.jpeg

I have to work more in this benchmarks ......:)

: 47_002:

  • Thumbs Up 2

Share this post


Link to post
Share on other sites
Hi!!

Yesterday came!!,here are the mine:

First Benchmarks

I have to work more in this benchmarks ......:)

: 47_002:

Share this post


Link to post
Share on other sites
I see you are running pci-e 2.0. With tri-SLI people have seen 3.0 perform significantly better than 2.0 even on x16 with multiple monitors. Have you tried to enable 3.0 on your system? You need to enable it in BIOS and run a file from nvidia to modify the driver. It's not guaranteed to work though on SB-E systems, but usually it does.

Had no record of it, is a patch in windows?

Share this post


Link to post
Share on other sites

Got 1 EVGA 780 SC ACX in system running 1215mhz core stable and just put in an order for a 2nd one. Can't wait to put some benches on it.

Share this post


Link to post
Share on other sites

Waiting for a vanilla one (TNT is slooooow)... I just got a high flow bracket; it seems that backplate are rare as gold...

Share this post


Link to post
Share on other sites

Got an EVGA 780 ACX, just barely hits 1200 MHz on the stock BIOS. +350 or so on mem, haven't pushed it to instability yet.

Share this post


Link to post
Share on other sites

got my EVGA SC ACX 780 gets up to around 1260 with stock bios and tends to crash any further. I am satisfied with the card as it idles 22-24 degrees and generally only hits up to 53 ish degrees on load A VERY nice piece of hardware

Share this post


Link to post
Share on other sites

Woot woot just received my brand new EVGA 780 ACX!!!

Has an ASIC of 77% and clocks at 1110MHz stock out of the box! :)

Time to bench this baby and see what she can do!

Share this post


Link to post
Share on other sites

I am probably going to buy a Gigabyte 780 with the stock cooler this summer!

Anything you think I should know beforehand?

Share this post


Link to post
Share on other sites
I am probably going to buy a Gigabyte 780 with the stock cooler this summer!

Anything you think I should know beforehand?

Share this post


Link to post
Share on other sites

bought 2 ... waited nearly 1 month for the 780 version cooler ... but than decided to stop waiting and take the titan version ... who cares if it is standing titan or 780 on it ;)

post-7749-14494995690827_thumb.jpeg

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

I bought one for my new 3dvision build and I love it. I was a little surprised that it wasn't a large gain from my 7970 ghz edition but I still love the card and I love what Nvidia has to offer. It's been 5 years since I've been with the green team and I'm enjoying being back.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By ounces
      After spending significant time and effort to obtain "DC" screen for 8770w (which is essentially a regular IPS panel with fancy board that converts 8bpc LVDS to 10bpc DP), I have finally got and installed one. All works great, except of the one problem...

      It has pretty bad banding / posterization in lower shadows. I have tried profiling it in different modes (full range, sRGB, rec709) - issue persists, and it indeed shows only in the lowest part of the characteristic curve. Mids and highlights are represented fine and show low deviation from reference values.

      GPU is HP K4000M, Nvidia drivers installed "as it is", video-card is identified without a hitch.
      Banding was not present with the original TN panel using the same GPU.
       
      While checking a software side, I have noticed that Win10 has bit depth set to 8-bit...
       

       
      My initial reaction was, - "Easy, let's change it in `nvidia-settings` and we're all set":

      ...but that would be too easy, right? After selecting 10bpc and clicking "Apply" screen went off and back on, only to show that depth stayed at 8bpc. Repeating the above few times yielded exactly the same result and I'm not in a hurry to meet a cliched (and laymen) definition of insanity.
       
      Let's check GPU-Z. So far so good, nothing unusual. Notice the highlighted BIOS version and subvendor string:
       
      Time to delve into other tabs. We are running WDDDM v2.4 which supports GPU dithering, but hey... BIOS version has changed!
       
      Briefly back to `nvidia-settings` to check what is reported by vendor's own utility:

       
      So far, we have two strings for BIOS version:
      80.04.5A.00.02 (let's call it an "A") 80.4.33.0.37 (let's call it a "B")  
      Notice how 2nd one seems to not follow hexademical notation. Lastly, "NVIDIA BIOS" drop-down, reports "A" version:
       
      ...and monitor section which confirms that rig is indeed capable of 10bpc, but currently running at mere 8bpc:

       
      Windows "Adapter settings", reports version "B". It's 2019, diversity is a must.

       
      "NVidia inspector" is of the same opinion:

       
      Now, let's use some seriously legit tools and check-in exported BIOS file in `nvflash`:

       
      Here we have two three interesting findings:
      Reported vendor is Dell, not an HP. See this link for details. BIOS version is back to "A". Have I already mentioned diversity? MXM module uses MX25L2005 flash storage in WSON-8 packaging. If things go real nasty, we should be able to rescue a patient via Pomona clip and external programmer.  
      Loading the same file in "Kepler BIOS tweaker" confirms the facts:

       
      EDID settings, courtesy of NVidia Control Panel. Hex dump can be found at the bottom of this post.
      ...Shall I be worried about "60.02Hz" refresh rate?
       
      To summarize:
      Why two different BIOS versions are reported? Anything to do with UEFI (e.g. HP is sideloading its own during boot)?.. Why two different vendors reported? As far as I remember, this is branded HP GPU. Where to get "clean" BIOS of K4000M for future experiments? Ideally from 8770w equipped with "DreamColor" panel from a factory.  
      Link to the dumps, BIOS ROM and monitor EDID: https://mega.nz/#F!zGgRmQIL!9q2QFZtHuK2RQ-WHXMA4Mg (also attached to this post)
      K4000M.zip
    • By Blocker35
      Hi guys, bit of a rookie to the whole EGPU scene. Currently I have:
       
      - MacBook Pro 2015 13inch (3.1GHz Core i7 16GB RAM)
      - Razer X Core 
      - Apple TB3 to TB2 Adapter
      -  TB2 Cable (Cable Matters)
      - 23inch AOC External Monitor
       
      I am wonder about what graphics card to get to run X-Plane11 with high graphic settings?
      I have purgewrangler set up and ready to use with an AMD graphics card, but am also open to the idea of an Nvidia graphics card.
      Any advice appreciated. I did not buy a Windows PC as I need a Mac for various other things and wanted an all-in-one laptop.
    • By Kel
      I got the exp gdc beast 8.5 got all the connections right... laptop boots up... fans turn on the gpu.... device manager detects gtx 1060 with a “ ! “ in a yellow triangle. Now what to do.... i tried to do the bios mod.... but realised that i have 3.07 version. 
      Questions-
      1 is there any way to get this done without the mod?? 
      2 if mod is the only way... kindly help me with step by step instruction in laymans terms... i m not a techy... so i might not understand technical terms.... altho i am interested... but learning yet. Please help. 
    • By thechillhacker
      Hello all
       
      I have a Clevo P370EM3 laptop with a pair of GTX 680Ms in SLI mode and have never been able to get Linux to work properly with full acceleration and without tearing. I have tried every xorg config I can find, and even all the modifications from the nvidia configurator to no avail. Has anyone been able to get these things to work 100% in Linux? I have typically used ubuntu based distros, including Mint, and every available driver version from the repositories, but can never get it to work quite right.
       
      Thanks for any help anyone can provide. It is killing me to run Windows on this machine because of these issues, and I am almost to the point of installing the inferior 7970 cards.
       
      Have a great day
      -TCH
    • By jhsd1124013561
      Help! I created a BOS BOOT DISK and use legacy to boot in DOS.   But it is saying that "An operating system wasn't found".   I have extracted all the files (the alienware m18x r2 a11 unlocked bios) into my external hard drive (format: NTFS)
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.