luoxia

P170HM memory 4GX4 = 2133MHz

6 posts in this topic

P170HM memory 2T 4GX4 = 2133MHz:Banane51:

post-6621-14494994945643_thumb.jpg

post-6621-14494994945864_thumb.jpg

Here is the 1T mode 4GX2 memory test

post-6621-14494994946263_thumb.jpg

post-6621-14494994946055_thumb.jpg

-1T with less delay, preferably the system memory performance. But poor compatibility. Suitable for your DIMM not populated.

-2T has a longer delay, much worse system memory better. The higher the compatibility, stability. For your DIMM is fully populated.

We recommended that the 1T memory settings allows memory to achieve the best performance.

post-6621-14494994945172_thumb.jpg

post-6621-14494994945401_thumb.jpg

Share this post


Link to post
Share on other sites

Thanks again under Prema enthusiasm to help thank you!

Share this post


Link to post
Share on other sites

Wow your memory can handle CAS9 2133MHz. Mine can't even handle CAS9 1866.

And is that 4590MHz on the CPU stable? Mine can only do around 4.35, with 4.4 OK if under 80C, and 4.5 OK if under 60C.

Share this post


Link to post
Share on other sites
Wow your memory can handle CAS9 2133MHz. Mine can't even handle CAS9 1866.

And is that 4590MHz on the CPU stable? Mine can only do around 4.35, with 4.4 OK if under 80C, and 4.5 OK if under 60C.

It's the good old HM-Series. On top of the BIOS mod he also has a modded 4 pipe heat-sink.

EDIT: His RAM is the famous Samsung M471B5273DH0-CK0, it does 2400Mhz @ 11-11-11-28 1T as 2x4GB on my W110ER. ;)

1 person likes this

Share this post


Link to post
Share on other sites
It's the good old HM-Series. On top of the BIOS mod he also has a modded 4 pipe heat-sink.

EDIT: His RAM is the famous Samsung M471B5273DH0-CK0, it does 2400Mhz @ 11-11-11-28 1T as 2x4GB on my W110ER. ;)

That's nuts. I was hoping that since haswell will also use DDR3 that laptop makers will put out better memory. No better memory came out with IVB's release though so I'm concerned.

Looks like that memory is hard to find too. Amazon wants $30 each used.

Share this post


Link to post
Share on other sites

I P170HM power 80W-90W 32s, 4X46full

XTU version 2.1 is set.

You give me crack BIOS, power consumption 80W-90W 32s.

Power consumption, the higher core power consumption at full load.

PS

There is closely linked with the heat.

post-6621-14494994946977_thumb.jpg

- - - Updated - - -

It's the good old HM-Series. On top of the BIOS mod he also has a modded 4 pipe heat-sink.

EDIT: His RAM is the famous Samsung M471B5273DH0-CK0, it does 2400Mhz @ 11-11-11-28 1T as 2x4GB on my W110ER. ;)

YES

http://forum.techinferno.com/clevo-sager/2808-p170hm-cpu-cooling-mod-2920xm-overclocking.html

http://forum.techinferno.com/clevo-sager/2807-p170hm-2920xmoc-ddr2133.html

The 3920MX QS version 150EM XTU to the 4.6G

post-6621-14494994947173_thumb.jpg

post-6621-1449499494739_thumb.jpg

post-6621-14494994947588_thumb.jpg

Wow your memory can handle CAS9 2133MHz. Mine can't even handle CAS9 1866.

And is that 4590MHz on the CPU stable? Mine can only do around 4.35, with 4.4 OK if under 80C, and 4.5 OK if under 60C.

Heating pipe cost $ 19.368

http://forum.techinferno.com/clevo-sager/2808-p170hm-cpu-cooling-mod-2920xm-overclocking.html

post-6621-14494994946553_thumb.jpg

post-6621-1449499494679_thumb.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now