Jump to content
EwinRacing Flash Series Gaming Chairs
Guest

[BIOS/vBIOS - MODS] Prema Mod™ & Stock

Recommended Posts

Guest

T|I and the author are no longer associated. 

For support kindly contact the author directly

 

 

 

Share this post


Link to post
Share on other sites

Truly awesome and unexpected, thanks Prema!

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Thank you very much PREMA. Incredible work. Really happy about the IRST firmware update.

  • Thumbs Up 3

Share this post


Link to post
Share on other sites

Sorry for asking a stupid question but what does the T1 mode mean? And is there a way to unlock full speed (well the normal 1600MHz) while using 8GB modules from bios?

  • Thumbs Up 2

Share this post


Link to post
Share on other sites
Guest
Sorry for asking a stupid question but what does the T1 mode mean? And is there a way to unlock full speed (well the normal 1600MHz) while using 8GB modules from bios?

The CMD Command rate (which may be T1 or T2) is the time it takes between when the signal is given to select the memory chip to be used (can be any of the chips within each memory bank) and the beginning of a read cycle of the memory chip. T1 means that this time it only takes 1 clock cycle and 2T takes 2 clock cycles.

1T is typically ~4-5% faster than the same memory/speeds at 2T.

Share this post


Link to post
Share on other sites
Guest
I'm sorry, I've already registered but I can't download your attachments. Why?

From the forum rules:

•You must have a minimum of 5 [quality] posts to send a private message, download attachment, send another member an e-mail, set a custom avatar, download files from the forum download section or upload photos to a personal album.

So it's very simple just look around the forum and see where you could help someone or share your own experiences with us and you are in.

Since your question helped others, who are browsing this thread and may have the same question, you are already one post closer... ;)

Share this post


Link to post
Share on other sites

How can we change the bootup splash?

And also for P150EM, I have a newer Sager BIOS than the 16, want it?

Thanks Prema.

Share this post


Link to post
Share on other sites
Guest
How can we change the bootup splash?

And also for P150EM, I have a newer Sager BIOS than the 16, want it?

Thanks Prema.

Yaeh Sager has become Clevos new "public beta tester", Clevo only uploads a BIOS after Sager had it for about a month...they even sell units with alpha BIOS.

Anyway the latest Sager P150EM I have is 1.02.17LS1, so if it's newer just PM me, allways like to take a look at the new stuff.

Regarding BIOS logo, it has become quite tight in these BIOS, that's why Clevo dowgraded the RAID version with the v16 line, there was simply no space left for the latest RAID rom and module...I had to make some...LOL.

Just PM me the logo (1920x1080) that you want to use and for which model and I'll see if we can make it fit. ;)

Share this post


Link to post
Share on other sites

Thanks a lot Prema for your effort. Finally the long awaited Clevo P1x0EM series BIOS mod! I can't download it yet (my first post here), but to make it clear - is it based on Clevo or Sager BIOS? Does it matter in this case? I've got Schenker XMG P502 = Clevo P150EM. Keep up the great work! May the Force be with you! :-)

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
Guest
Thanks a lot Prema for your effort. Finally the long awaited Clevo P1x0EM series BIOS mod! I can't download it yet (my first post here), but to make it clear - is it based on Clevo or Sager BIOS? Does it matter in this case? I've got Schenker XMG P502 = Clevo P150EM. Keep up the great work! May the Force be with you! :-)

It's all based on stock Clevo BIOS, but it works for all systems (Clevo, Sager etc...)

Share this post


Link to post
Share on other sites

Sorry for reposting the same question but is there any way hardcode or force the ram speed? I mean I have 4 dimm modules and when I use them all it drops to 1333MHz and this is normal as far as I know.

Share this post


Link to post
Share on other sites
Guest
Can you explain how it works this features: - Added full fan speed mode (Press FN+9 to toggle on/off)

Thank's :pride:

Just press the FN button along with the number button 9 to switch the fans too 100% speed and do it again to switch it back to normal?!?

Sorry for reposting the same question but is there any way hardcode or force the ram speed? I mean I have 4 dimm modules and when I use them all it drops to 1333MHz and this is normal as far as I know.

Even if we would expose the BIOS RAM settings, they no longer work on 1.02.xx BIOS...Clevo uses overrides...and it's not possible to track it down as I don't own an EM machine myself to brick it along the way...

The P570WMx even forces everything to 1600Mhz, it doesn't care if we use 1333,1866 or 2133Mhz RAM... ;)

Share this post


Link to post
Share on other sites

This is awesome, thanks Prema!!

Had a few $ in my paypal so I sent it your way, it's not much, but it's something!

Share this post


Link to post
Share on other sites
Guest

I am going to upload a simple "XTU CROSSFLASH EDITION" so you guys can go between P15xEM and P170EM Prema Mods (to use Intel XTU to Overclock your CPUs etc) in one simple flash without any brick risk.

Initially the file was too big to upload, but TI adjusted the file-size limits for us (THX for that!)...I have also tweaked the boot-logo for Win8 user to better 'merge' with the loading screen (THX @ iaTa for testing), so after that is integrated I'll update all the links...

Share this post


Link to post
Share on other sites
Just press the FN button along with the number button 9 to switch the fans too 100% speed and do it again to switch it back to normal?!?

FN+F9 in my P170EM is for increase increase brightness.

Sorry,after read FN+9 :D

Share this post


Link to post
Share on other sites
Guest
FN+F9 in my P170EM is for increase increase brightness

Just 9 not F9 :bananalama:

Share this post


Link to post
Share on other sites

Nice bios!Tested in P170EM and work fine!

You can mod the bios BIOS 1.00.10 ?I dont like the last bios,for Fn+Wifi dont work with software Hotkey.

if you can do it and I agree with donation

- System BIOS 1.00.10 for P170EM only.

- Solve sometimes system stops on POST issue.

- If the BIOS version of machine is 1.00.03 or early, please update to 1.00.04 before executing next step.

- Refer to the instruction of readme.txt to update BIOS + ME firmware.

- To downgrade BIOS will cause system can't boot up if the BIOS of machine is version 1.00.07 or later.

Share this post


Link to post
Share on other sites
Guest
Nice bios!Tested in P170EM and work fine!

You can mod the bios BIOS 1.00.10 ?I dont like the last bios,for Fn+Wifi dont work with software Hotkey.

if you can do it and I agree with donation

"To downgrade BIOS will cause system can't boot up if the BIOS of machine is version 1.00.07 or later." :stupid:

Sorry, but they really mean it. :concern:

All the FN stuff is in the EC and downgrading the EC from 1.02.xx to 1.00.xx is 'russian roulette'...afaik all EC from v11 onwards have the bug. If you are confident that you can downgrade to an earlier EC, let me know, but I can't advise to try it. ;)

Share this post


Link to post
Share on other sites

Prema, will you be able to make the mod with XMG boot logo? There's quite a few of us XMG folks around I suppose. I found a pretty cool XMG logo, different from the original one. Still a few post to 5, so I could send it to you via notebookreview forum. Would it be difficult for a layperson (me) to change the logo myself? Are there any programs I could use for CLEVO+AMI BIOS?

Share this post


Link to post
Share on other sites

My laptop is P150em but bios is p170em beause I have dumped bios for XTU. In this case I think I have to install P170EM mod bios for XTU , will it have any problem with it?

Share this post


Link to post
Share on other sites
Guest

I just uploaded the versions with the new Win8 logo, they are marked PMv1.0 instead PMv1. P370EMx PMv1.0 version tonight...

Prema, will you be able to make the mod with XMG boot logo? There's quite a few of us XMG folks around I suppose. I found a pretty cool XMG logo, different from the original one. Still a few post to 5, so I could send it to you via notebookreview forum. Would it be difficult for a layperson (me) to change the logo myself? Are there any programs I could use for CLEVO+AMI BIOS?

I won't publish any vendor logos in my mods except a shop approaches me directly to cut a deal. Check your PM on NBR. :)

My laptop is P150em but bios is p170em beause I have dumped bios for XTU. In this case I think I have to install P170EM mod bios for XTU , will it have any problem with it?

Yep! ;)

One question, if you change the TDP settings in XTU does Throttlestop "TPL" window report the same Long and Short package power limits?

On the older HM series Clevo faked the TDP change in XTU and TS showed us that in reality nothing had changed.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Similar Content

    • By pippocarlot
      Hello everyone! I am looking for an answer to a problem I cannot find a solution to ... I purchased an Amd wx 4150 MXM GPU module su e bay to upgrade my HP 8570W Mobile Workstation which is currently equipped with a Fire Pro M4000. Once the new GPU has been installed, the PC screen no longer turns on but works only with external monitors connected via the docking station. The same happens once the drivers are updated! If I put the old card back on, the integrated monitor starts working again ... How can I fix it?
    • By Swick1981
      Bios Release Version – v2.0.0
       

       
      Updated or Modded Items:
      A11 UNLOCKED BIOS FOR m18Xr2 (UNLOCKED BY SVL7 AND FULL CREDIT GOES TO HIM FOR UNLOCKING!)
      SVL7 Also created the PRR2.EXE tool that allows you to flash the new bios by unlocking it.  (FULL CREDIT GOES TO HIM FOR THAT FILE PRR2.EXE)
       
      Here are ALL the things I've added, modded, and enhanced on this bios -
      I've added FULL LEGACY SUPPORT ON THIS BIOS with ONE or TWO CARDS (SLI).  You can FINALLY use Win 7 OS on your machine and run the 900 series GPU's! 
      This is a MAJOR breakthrough!
       
      LEGACY SUPPORT Confirmed.  Works with 900 series GPu's in single OR SLI formation Updated the Intel RST Legacy to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated Intel RST UEFI to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated the ONBOARD Video Card for the HD3xxx to v2171 - FROM v2132 Updated ONBOARD Video Card for the HD4xxx to v2171 - FROM v2132 Updated the LAN Firmware & PXE Boot from 2.0.5.9 to v2.0.6.6 ADDED NvMe Support for m18xr2 ADDED M.2 support for m18xr2 Updated CPU Microcode to v29 for the 2900 CPU's Updated CPU Microcode to v1c for the 3900 CPU's Updated GOP Driver for Intel Sandy Bridge CPU Updated GOP Driver for Intel Ivy Bridge CPU Updated MAIN GOP Policy module for the m18xR2 Eliminated some code that wasn't used in the m18xR2 Updated CSM Module (v2) Streamline some coding to make mod(s) run a little more efficiently (v2) Added FPARTS.TXT to rar file in v2. (I had forgot to add it in v1) v2.5 to be released shortly.  I've updated a few more modules that I didn't realize could be updated.  (It's only 3 modules, but it's still an update!)   It should be released in about a week.  Hope this helps ya'll!  
      Instructions to flash:
      Use a flash drive to create a boot disk into dos Unzip ALL files into the root of the flash drive (flash.bat, r2final.bin, fpt.exe, flash.bat, prr2.exe, fparts.txt,m18r2.hdr, m18r2.hdr.bin, readmefirst.txt) BOOT INTO DOS – Note, that when you set the bios to legacy in order to boot into dos, you MAY have to reinstall OS!  (Just be prepared to reinstall no matter what) Once you boot into dos, run the file flash.bat It will unlock your bios (THANKS TO SVL7’s BIOS UNLOCKING TOOL – ALL CREDIT TO HIM FOR THIS TOOL!) Let it flash… Reboot your pc, and enjoy the MASSIVE updates!  
      Be on the lookout as I do plan to release newer version with more updates in the future.  However, it wont be for at least a few weeks as I'm now working on legacy support for the m17xR4 and several other systems.  So please be patient!
       
      ENJOY!
       
      Thread link for more information and discussion:
       
    • By svl7
      Files contained in this archive:
      FTP-DOS.zip prr2.zip M18x R2 - BIOS A03 'unlocked.zip M18x R2 - BIOS A08 'unlocked.zip M18x_R2_-_BIOS_A08_-_[unlocked]_-_[IRST 11.0.6.1702].zip M18x_R2_BIOS_A03_-_[unlocked] - [IRST 11.6.0.1702].zip M18x_R2_BIOS_A09_-_[unlocked].zip [FPT]-M18x_R2_BIOS_A09_-_[unlocked].zip [FPT]-M18x_R2_BIOS_A10_-_[unlocked]_V2.zip M18x_R2_-_BIOS_A08_-_[unlocked].zip M18x_R2_BIOS_A03_-_[unlocked].zip  
      For information on how to use the files in this archive, see here:
       
       
      My donation link in case you want to buy me a beer
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.