Jump to content
EwinRacing Flash Series Gaming Chairs
Guest

[BIOS/vBIOS - MODS] Prema Mod™ & Stock

Recommended Posts

I would't flash that backup. ;)

...Terrans Force offers the same stock Clevo BIOS & EC in their official support Forum as the ones in the OP here...so if you have a hardware problem that will be good enough for them when sending it in.

I would try the v2 Mod first as it flashes everything and resets your NVRAM in case it got corrupted along the way...

I've flashed to v2 mod, and the camera sometimes has been shown in Device Manager, sometimes not.

Don't know what the reason is, it's strange but I would not like to be entangled with it anymore...

Thanks for your efforts.

Share this post


Link to post
Share on other sites
Guest
I've flashed to v2 mod, and the camera sometimes has been shown in Device Manager, sometimes not.

Don't know what the reason is, it's strange but I would not like to be entangled with it anymore...

Thanks for your efforts.

Sounds like a broken cable...had the same on my W110ER

Share this post


Link to post
Share on other sites
Did you change CSM settings? Like forcing UEFI vBIOS in non UEFI mode? Are you using fastboot or is an external screen connected, too?

Please load setup defaults, save and exit and confirm that it looks the same...

no.. never change any setting in bios, i also tried to load setup default but looks the same! no ext. monitor connected

Inviato dal mio GT-I9505 con Tapatalk 2

Share this post


Link to post
Share on other sites
Guest
no.. never change any setting in bios, i also tried to load setup default but looks the same! no ext. monitor connected

Inviato dal mio GT-I9505 con Tapatalk 2

That's not cool. To iron out your Windows installation > Anyone else can confirm that non UEFI mode boot logo looks like this on P370SM v2?

EDIT: You are using Win 8.x, right? If not set OS to "Other"

Also, you used v1 of my Mod on your P370SM, too. Did it look the same for you?

Share this post


Link to post
Share on other sites
That's not cool. To iron out your Windows installation > Anyone else can confirm that non UEFI mode boot logo looks like this on P370SM v2?

EDIT: You are using Win 8.x, right? If not set OS to "Other"

Also, you used v1 of my Mod on your P370SM, too. Did it look the same for you?

i try to reistall the os (win 8.x) with UEFI. Now the logo appears correcltly.

So the problem is in Non Uefi mode logo

Inviato dal mio GT-I9505 con Tapatalk 2

Share this post


Link to post
Share on other sites
Guest
i try to reistall the os (win 8.x) with UEFI. Now the logo appears correcltly.

So the problem is in Non Uefi mode logo

Inviato dal mio GT-I9505 con Tapatalk 2

Check your Email!

Did you do the vBIOS update on 8970M? There was a bug in the older versions. It's in the third post of the OP!

It should be version BR44618.005 in order to work correctly on P37xSM

Share this post


Link to post
Share on other sites
Check your Email!

Did you do the vBIOS update on 8970M? There was a bug in the older versions. It's in the third post of the OP!

It should be version BR44618.005 in order to work correctly on P37xSM

no :) i never update vbios on 8970m too!!

so... i should make a vbios update to solve!!

Inviato dal mio GT-I9505 con Tapatalk 2

Share this post


Link to post
Share on other sites
Guest

OK, we fixed Clevos P37xSM non UEFI Logo Bug. THX@sl44n3sh for testing! :)

P370SM & P375SM Mods now updated in the OP!

ENJOY!

Share this post


Link to post
Share on other sites

Hey Prema,

I just recently found out about your BIOS mod, and well, am really tempted to flash it because of the endless fan noise. However, I haven't really done any BIOS flashes before and can't really find any specific warnings from my lurking around. So, just to make sure that I wouldn't brick W230ST from Sager from an instant v2 flash.

Currently I have:

ME: 9.0.20.1372

BIOS: 1.00.05LS1

EC: 1.00.04

So, would I be able to instantly just flash the v2, or are there other steps I have to go by first?

Thanks,

WaffleZ

Share this post


Link to post
Share on other sites
Guest
Hey Prema,

I just recently found out about your BIOS mod, and well, am really tempted to flash it because of the endless fan noise. However, I haven't really done any BIOS flashes before and can't really find any specific warnings from my lurking around. So, just to make sure that I wouldn't brick W230ST from Sager from an instant v2 flash.

Currently I have:

ME: 9.0.20.1372

BIOS: 1.00.05LS1

EC: 1.00.04

So, would I be able to instantly just flash the v2, or are there other steps I have to go by first?

Thanks,

WaffleZ

Wow, that's an old BIOS/EC...but there are no versions on this model that can't be updated directly from.

Just follow the included readme file and you will be fine!

ENJOY! :)

Share this post


Link to post
Share on other sites

Open petition to Clevo!!!

Premamod Bios as official "stock bios" on every Clevo Notebook!!!!!! 😄

....If u have a Clevo notebook without Premamod Bios... u have only half notebook!! :D :D

Inviato dal mio GT-I9505 con Tapatalk 2

Share this post


Link to post
Share on other sites
Wow, that's an old BIOS/EC...but there are no versions on this model that can't be updated directly from.

Just follow the included readme file and you will be fine!

ENJOY! :)

Yeah, I haven't really updated the BIOS ever since I got the machine since I never really found "easy/automatic" ways to do so, and was never really bothered to do so anyway...until simply patching Guild Wars sounded like a nuclear device activating. Anyway, then I'll get right to it and update to v2 ;D!

Thanks!

Share this post


Link to post
Share on other sites
Guest
Open petition to Clevo!!!

Premamod Bios as official "stock bios" on every Clevo Notebook!!!!!! 

....If u have a Clevo notebook without Premamod Bios... u have only half notebook!! :D :D

Inviato dal mio GT-I9505 con Tapatalk 2

THX! :)

You can already purchase your Clevo directly with a custom/branded version of my Mod and covered by their warranty from one of our growing family of Prema Mod Partner Shops:

PARTNER SHOPS | Prema Mod

Share this post


Link to post
Share on other sites

Fantastic! no warranty lost!!!!! :eek: :eek: :eek:

My next notebook will be from your partner shop!! :D

Inviato dal mio GT-I9505 con Tapatalk 2

Share this post


Link to post
Share on other sites
Fantastic! no warranty lost!!!!! :eek: :eek: :eek:

My next notebook will be from your partner shop!! :D

Inviato dal mio GT-I9505 con Tapatalk 2

When I bought my W230ST, I only installed windows and all the drivers. After that I installed prema v1 bios.

I didn't use the stock bios for long and was amazed with the differences it made.

My gf house is right next door to the distributor that sold it to me, so if anything went wrong... I would've simply exchanged the laptop 1 hour after purchasing it lol.

Share this post


Link to post
Share on other sites

Thanks for your continued support, Prema. I'm using the W230st v1 and I'm very happy with it. I've read the change log for v2, thanks for your hard work.

Share this post


Link to post
Share on other sites

Hey Perma,

New on this site, so maybe a newb question.. If one of your bios mods bricks my P170SM, would it be possible to buy a new bios chip and fix it?

Second, i got Bios version 1.00.09 and EC 1.00.04 now, should i just download the v2 bios for this model and flash right away?

Btw.. what should i use the

MD5 code for?

Share this post


Link to post
Share on other sites
Guest
Hey Prema,

Have you looked at the issue with my CPU being locked?

I'll be on holiday from tomorrow onwards, will check it afterwards... ;)

Hey Perma,

New on this site, so maybe a newb question.. If one of your bios mods bricks my P170SM, would it be possible to buy a new bios chip and fix it?

Second, i got Bios version 1.00.09 and EC 1.00.04 now, should i just download the v2 bios for this model and flash right away?

Btw.. what should i use the

MD5 code for?

Yeah you can directly use the Mod, just follow the readme.

You could program the BIOS chip with a programmer or get one pre-flashed from svl7...

MD5 code is just for verification that the file din't get corrupted during the download. :)

Share this post


Link to post
Share on other sites
I'll be on holiday from tomorrow onwards, will check it afterwards... ;)

My Clevo is almost ready... And damn I miss it..

Enjoy your vacations Prema and a big hug from me (you know who I am xD)

Enviado do meu SM-N9005 através de Tapatalk

Share this post


Link to post
Share on other sites
OK, we fixed Clevos P37xSM non UEFI Logo Bug. THX@sl44n3sh for testing! :)

P370SM & P375SM Mods now updated in the OP!

ENJOY!

Hey Prema.

Enjoy your holiday bud. I wanted to try your custom bios for the CLEVO P370SM. Is there any way to flash save the stock bios or a way flash the bios to stock in case of a return for RMA? I would like to get a custom bios with a custom picture startup screen. What are the requirements to send you a private message to see if you can do this for me? Thanks.

Share this post


Link to post
Share on other sites
I just uploaded a new version of the P1xxSM Mods with a little tweak that let's you get rid of the stock BIOS 'BUG' that keeps the dGPU FAN spinning even after it is no longer in use. (Totally spaced it the first round) :D

Set the option under "Advanced" > "Switchable Graphics" > "PX 5.0 Mode" to "BACO"

This is supposed to turn off the fan when the dedicated GPU is on standby, right?

I set the option to BACO and the fan is still on.

Edit: I had to reinstall the drivers after the BIOS update, it's fine now.

Share this post


Link to post
Share on other sites
Hey Prema.

Enjoy your holiday bud. I wanted to try your custom bios for the CLEVO P370SM. Is there any way to flash save the stock bios or a way flash the bios to stock in case of a return for RMA? I would like to get a custom bios with a custom picture startup screen. What are the requirements to send you a private message to see if you can do this for me? Thanks.

"fpt -d backup.rom" after running MESET.exe will backup your whole flash image. Prema also has stock images in the first post.

Share this post


Link to post
Share on other sites

Someone can tell me about a modded bios to Clevo W150HNM? or the lasted updated bios is 1.01.13?

Share this post


Link to post
Share on other sites
Guest
Hey Prema.

Enjoy your holiday bud. I wanted to try your custom bios for the CLEVO P370SM. Is there any way to flash save the stock bios or a way flash the bios to stock in case of a return for RMA? I would like to get a custom bios with a custom picture startup screen. What are the requirements to send you a private message to see if you can do this for me? Thanks.

Carefull with flashing backups!

If you flash an old BIOS backup to a new EC (which we can not backup) it will brick your system...use the stock BIOS offered here or on the blog instead.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Similar Content

    • By Klem
      In this thread you can post your requests for Lenovo ThinkPad T440p / T440s / T540p.
      If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, then you can post your request in this thread.
      Important!
      For creating bios backup and to flash bios mod, you must use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!
       
      Just dump your Bios using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
       
       


       
       
    • By Cubitci
      To install the unlocked bios, I prepared and booted a freedos usb. I start the installation by typing flash.bat but every time I get the following error: Error 28: Protected Range Registers are currently set by BIOS, preventing flash Access. Please contact the target System BIOS vendor for an option to disable Protected Range Registers.
      How can i solve this problem ?
    • By Cubitci
      İ'm trying to backup my bios but program shows this error: Error 201: [FPTw.exe] cannot be run on the current platform. Please contact your vendor. And my system is x64 but programs shows System = x32 . How can i solve this error ?
       
      EDİT: Now shows "Error 285: Fail to load driver (PCİ access for Windows). Tool needs to run with an administrator priviledge account." And at the end the system says it cannot find the specified location, and therefore no results. 
       
      EDİT 2: Now shows Error 284 but i cant see text.
       
      ------------------------
      Intel's FPT v.1.0.4.1089
      ------------------------
      System = x32
      Desktop path = C:\Users\Remzi Ince\Desktop
       
      program shows its my desktop path but its not my desktop path. My laptop language is turkish and my desktop path is C:\Kullanıcılar\Remzi Ince\Masaüstü
       
    • By Hyuk Yun
      I need help to unlock my BIOS can somebody teach or help me??
       
      I want to unlock the hidden advanced and chipset tab plz help me.....
       
      https://drive.google.com/open?id=172WwwQC-IGfGeFA55lr2a5ahe7rIS0Sf
       
       
    • By Luisrr2029
      Hello can anyone suggest a mod for bios or alternative bios for Msi GE72 2qc apache gaming laptop to overclock 
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.