Jump to content
EwinRacing Flash Series Gaming Chairs
Prema

[BIOS/vBIOS - MODS] Prema Mod™ & Stock

Recommended Posts

I have one more question: my current bios version is:

...

Can i update right away with P150EM_17_11_PM_v2.rar, or there are some others requirements ?

That's the minimum BIOS v1.00.04, please check the 'F2' BIOS if your EC version is also 1.00.04 or higher. In case it is you are good to go ahead and flash the Mod.

ENJOY! :)

Share this post


Link to post
Share on other sites

OMG it is really working !

I jumped from (worst scenario wirdest shit going on)

min 20 FPS in DayZ to 44-61 on low

and from

min 30 in BF4 to min 54-67 on low

+ low temp

+ no BSOD

tank You kind stranger !!!

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
OMG it is really working !

I jumped from (worst scenario wirdest shit going on)

min 20 FPS in DayZ to 44-61 on low

and from

min 30 in BF4 to min 54-67 on low

+ low temp

+ no BSOD

tank You kind stranger !!!

That's just the basic Mod effect on the CPU. You can now also install Intel XTU Software so you can overclock it , too.

ENJOY!

Share this post


Link to post
Share on other sites

Could you give me any advice where can i find info about OC i7-3920xm ? because I tryed using search, but can't find voltages and safe currents etc.

Share this post


Link to post
Share on other sites

Don't raise the voltage. The chip should do 4-4.5Ghz without it...just try ;)

Share this post


Link to post
Share on other sites
Don't raise the voltage. The chip should do 4-4.5Ghz without it...just try ;)

Mine only does 4250 without adding volts :(

@asmodat

You really can't go too high on volts since there is such high losses in the power traces to and from the CPU, so the CPU cannot see a high enough voltage to cause damage.

The voltage regulation will have overheating issues which you might run into if you try sustaining 70-85W, and definitely will 85W+, but everything has temp sensors and will throttle before things die.

In summary your limits will be CPU temps and voltage regulation (specifically the MOSFET gate drivers) temps.

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Prema, thanks for all the hard work you do.

quick question, my bios shows=

P370EM

Bios 1.02.08 PM v2

KBC/EC 1.02.08PM

is that your latest bios mod for the P370em?

on your main page i see P370EM_08_08_v2_K2 but no P370EM_08_09_v2_k2

is there a diffrence between the 2 or is the 08 08 v2 K2 the newest release for what i have(windows key on the left)?

Again great work and thanks for the help!

Share this post


Link to post
Share on other sites
The usual early Turbo throtthle, T2 Timings when 4 RAM are used, limited OC options...that's why we have the Mod for P-EM. ;)

good:couple_inlove:, if I put your bios mod then I can go back original bios?sorry my english:pudency:

Share this post


Link to post
Share on other sites
Prema, thanks for all the hard work you do.

quick question, my bios shows=

P370EM

Bios 1.02.08 PM v2

KBC/EC 1.02.08PM

is that your latest bios mod for the P370em?

on your main page i see P370EM_08_08_v2_K2 but no P370EM_08_09_v2_k2

is there a diffrence between the 2 or is the 08 08 v2 K2 the newest release for what i have(windows key on the left)?

Again great work and thanks for the help!

Yep, that's the highest version which was made at that time for your layout.

good:couple_inlove:, if I put your bios mod then I can go back original bios?sorry my english:pudency:

Sure, just make sure to use the stock BIOS that are inn the first post, too.

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Sure, just make sure to use the stock BIOS that are inn the first post, too.

thank you very much

Share this post


Link to post
Share on other sites

Thank you Prema for your fast response. i do have another question. i'm pretty sure you have posted it before but i cant find it so ill ask, what temps are the fans supposed to increase at and by what percentage?

for some reason my rig seams to have heat/fan related issues. whe system is idle fans run very low, start game and no fan change, play game for about 45 min no fan change and system locks up.

but if i start game fans idle, hit Fn+1(hear fans go full throttle), play game for 2 hours no problem.

Again i only ask cause listening to the fans there is no change in sound from idle to moderate load/heat rise or high heat/load and lockup.

any help would be appreciated.

Share this post


Link to post
Share on other sites
Thank you Prema for your fast response. i do have another question. i'm pretty sure you have posted it before but i cant find it so ill ask, what temps are the fans supposed to increase at and by what percentage?

for some reason my rig seams to have heat/fan related issues. whe system is idle fans run very low, start game and no fan change, play game for about 45 min no fan change and system locks up.

but if i start game fans idle, hit Fn+1(hear fans go full throttle), play game for 2 hours no problem.

Again i only ask cause listening to the fans there is no change in sound from idle to moderate load/heat rise or high heat/load and lockup.

any help would be appreciated.

That doesn't sound right, they should spin higher at about 70c+...please set Clevo Control Center to high performance and unplug and replug the PSU once while the system is running to reset the EC/power states.

Share this post


Link to post
Share on other sites

:lemo:

Prema,

I mailed BTO again about what's happening with my laptop. And the answer was that the laptop motherboard and cpu both were replaced. I don't have to pay anything because they gave me extra service, so thumbs up for BTO! Normally if you have a custom bios flashed you have to pay everything but now just nothing :semi-twins: And they think there is a chance that i receive the laptop this friday

But now the big question; could the cpu actually be damaged by this bios?

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Even with the Mods there are many Throttle and protection mechanisms by Intel in place for too high temps, voltage etc.

Those will kick in in long before any physical damage can take place. ;)

Since your system just ran for 3-4 days I think what you got there was just a bad apple.

Glad you will be up and kicking again soon! :D

Drop me a line once you get it, have something for You! ;)

Share this post


Link to post
Share on other sites

No change to bios menu options after flashing Perma Mod on my P150EM?

Being that everyone seems so giddy about the bios mod, it sound's like more menu options (fine tune for instance) should pop up in the bios.

Hate to be a newbie, but after searching, I found no similar posts... what did I miss?

Before...

108663d1391801116t-prema-bios-mod-review-imag0153.jpg

After Prema update:

108664d1391801176t-prema-bios-mod-review-imag0154.jpg

Thanks!

Share this post


Link to post
Share on other sites

Yeah,:54_002::20_003:

I just got access to the Prema vbios mod but I'm thinking should I first up date the system bios I mean I will at some point OC this beast. my KBC/EC version is 1.03.01 and my ME version is 9.0.20.1447. (what does the acronym ME stand for? Mechanical edition?, Mobile Evolution?).

Share this post


Link to post
Share on other sites
No change to bios menu options after flashing Perma Mod on my P150EM?

Being that everyone seems so giddy about the bios mod, it sound's like more menu options (fine tune for instance) should pop up in the bios.

Hate to be a newbie, but after searching, I found no similar posts... what did I miss?

...

Thanks!

I replied to you hours ago, but looks like the internet swallowed it. :P

Look at my reply here: http://forum.techinferno.com/clevo/3119-%5Bbios-mods%5D-prema-mod-latest-stock-bios-33.html#post51457

Latest XTU is here: https://downloadcenter.intel.com/SearchResult.aspx?keyword=%22%22extreme+tuning+utility%22%22

Yeah,:54_002::20_003:

I just got access to the Prema vbios mod but I'm thinking should I first up date the system bios I mean I will at some point OC this beast. my KBC/EC version is 1.03.01 and my ME version is 9.0.20.1447. (what does the acronym ME stand for? Mechanical edition?, Mobile Evolution?).

You can directly flash the Mod. It will flash EC (Keyboard Controller), BIOS & ME (Management Engine Firmware. Controls mainly bus clocks).

ENJOY :)

Share this post


Link to post
Share on other sites

Thanks Prema for your reply,

K so ME is an acronym for (Management Engine). Or is it an acronym for (Management Engine Firmware. Controls mainly bus clocks). I only ask because it seems logical for the first but knowing people these days the second is more likely:) Also can I revert to my original bios at any time?

Share this post


Link to post
Share on other sites

ME = Management Engine

ME Firmware is hosted on it's own chip on the motherboard

ME Software has to be installed in OS

You can use the stock BIOS from the OP at any time in case you want to return to the unaltered version.

Don't flash any random versions and always follow the readme. ;)

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
is it suite for Terrans Force X511?

Only if it is the P150EM IvyBridge version.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Similar Content

    • By Dr_Cachetes
      Hello everyone, it is 2020 and i've been looking literally EVERYWHERE for a modded vBios for an Asus G751jy (980m 4gb) to unlock voltage control above 25mV, can someone help me?
      I've seen people have been linking the mod so here's mine, latest 213
      GM204.rom
    • By Klem
      Hi,
      In this thread you can post your requests for AMD-V unlock on ACER E5-553G and same laptops with AMD CPU's, for example Acer Aspire E15, Acer Aspire E5-523G, Acer Aspire E1-522, Acer Aspire E1-420, Acer Aspire E5-421, Acer Aspire V5-123, and etc.
       
      Now we can unlock  AMD-V function for virtualization support. In general, this method described in the article on this link: http://www.geektech.co.nz/how-to-unlock-...enovo-y700
      This way requires Windows as a system because  some tool works only in Windows.
       
      Download this tool: https://drive.google.com/file/d/0B4NHIBM...RtQXM/view
      Extract the archive H2OUVE.rar directly on the Desktop and copy the H2OUVE folder directly on the disk C:\
      Then run the Command prompt as Administrator and execute these commands:
      cd  \
       
      cd  H2OUVE
       
      H2OUVE.exe   -gv   vars.txt

      After each command press the Enter button.
      After that, you'll have the file "vars.txt" in H2OUVE folder.
      Post here this file "vars.txt" or upload it to any fileserver and  send me the link.

      For reference, here's the EFI-table with available settings for this notebook: https://drive.google.com/open?id=0B4NHIB...WI4LW14bE0
      And here's the setting that needs to be changed:
      0x1C40B             Setting: SVM support, Variable: 0xEE {05 91 54 02 55 02 54 00 34 12 EE 00 00 10 00 01 00}
      0x1C41C                 Option: Disabled, Value: 0x0 (default) {09 07 27 00 10 00 00}
      0x1C423                 Option: Enabled, Value: 0x1 {09 07 28 00 00 00 01}
    • By BAKED
      BAKED BIOS FOR TM, KM, DM, P6, P4 SERIES WITH MOST MENUS AND OPTIONS UNLOCKED PLUS OTHER MODIFICATIONS
       
      NEW:
      I HAVEN'T BEEN ACTIVE IN A WHILE BUT I MIGHT FIND SOME TIME SOON TO WORK ON AND RELEASE NEW MODS.
      I STARTED WORKING ON V3.0 A WHILE BACK WHICH WILL INCLUDE UPDATED UEFI DRIVERS, MICROCODE, BIOS SCREEN SHOT SUPPORT AMISCE SUPPORT(For some models) PLUS MORE. 
      ALL TM, KM AND DM SERIES ARE V2.0 AND NOW HAVE WINDOWS FLASHER INSTEAD, JUST EXTRACT AND RUN FLASH.BAT
      WARNING! BIOS FLASHING IS RISKY SO MAKE SURE YOU KNOW WHAT YOU'RE DOING BEFORE PROCEEDING. 
      FLASHING THE WRONG BIOS OR INTERRUPTING THE FLASHING PROCESS WILL BRICK YOUR SYSTEM! 
      USE AT YOUR OWN RISK!
      TM, KM AND DM SERIES
      P6 AND P4 SERIES
      INSTRUCTIONS
       
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.