Jump to content
Prema

[BIOS/vBIOS - MODS] Prema Mod™ & Stock

Recommended Posts

Thanks a lot Prema!

Just a simple question. I brought my laptop from an Italian builder, they load a custom BIOS, but the barebone is P150SM. Can I flash flawlessy the stock Clevo bios on the laptop?

They are all the same, all manufactured by Clevo, all campatible.

ENJOY! :)

Share this post


Link to post
Share on other sites

Good news, the issues i had with blck not even showing up in intel xtu are resolved by reinstalling to a newer version and that also enabled the memory XMP and custom settings. Although im not sure if i should mess with my ram settings.

I got kingston KHX1866C11S3/4g and 4 dimms of them, they can do 1106mhz according to cpu-z but im missing most latencys and dont want to brick it.. Is there a save way to test what settings work best?

Share this post


Link to post
Share on other sites

That's what the P-EM Mod is for, it enables XTU support.

You can't mess anything up. Either it works or it doesn't, in which case it either resets on it's own or via a CMOS reset.

Share this post


Link to post
Share on other sites
That's what the P-EM Mod is for, it enables XTU support.

You can't mess anything up. Either it works or it doesn't, in which case it either resets on it's own or via a CMOS reset.

Well i can now say that it doesnt resets on its own.. had to do a cmos reset, but damn that tiny connector was pretty stuck in there.. was afraid of damaging the motherboard.

Share this post


Link to post
Share on other sites
Well i can now say that it doesnt resets on its own.. had to do a cmos reset, but damn that tiny connector was pretty stuck in there.. was afraid of damaging the motherboard.

I damaged mine and had to solder it back together.

Share this post


Link to post
Share on other sites
I damaged mine and had to solder it back together.

You just take any chance you can get to solder something ;)

Share this post


Link to post
Share on other sites
Damn, didnt knew doing a cmos reset was so dangerous.

Eh, all it did was give my laptop amnesia. Having to remind the laptop what time it was and what to run the CPU and memory at after each startup was annoying though.

Adding a random memory stick (I use the slots under the keyboard) then pulling it is definitely the way to go. Resets everything but BCLK.

  • Thumbs Up 2

Share this post


Link to post
Share on other sites

Hi Prema, I just got a brand new W230ST from Sager and the BIOS and EC versions are 1.03.03LS1 and 1.03.01SA, respectively. Is your BIOS mod safe to flash?

Share this post


Link to post
Share on other sites
Hi Prema, I just got a brand new W230ST from Sager and the BIOS and EC versions are 1.03.03LS1 and 1.03.01SA, respectively. Is your BIOS mod safe to flash?

Sure thing! ENJOY :)

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
Sure thing! ENJOY :)
Worked flawlessly. Thanks for making this great mod. How can I make a donation via PayPal?
  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Enjoy!

Donation links are in the OP of this thread. ;)

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Well, BTO still has got my laptop :59: so i can't give any update, i think that my laptop comes next week back.

Share this post


Link to post
Share on other sites

Hello! I have an clevo p170emx with bios 1.02.17 and ec 1.02.16. Is it safe to update bios? And I saw there are 4 different rar files. What is the difference? And does it matter if I have p170em"x"?

Share this post


Link to post
Share on other sites
Hello! I have an clevo p170emx with bios 1.02.17 and ec 1.02.16. Is it safe to update bios? And I saw there are 4 different rar files. What is the difference? And does it matter if I have p170em"x"?

Same system, the 'x' is no problem. ;)

P-EM 2T EDITION > For better compatibility with difficult RAM (1866/2133Mhz or 32GB)

P-EM Regular Version > Win key on the right & FULL FAN = FN+9

P-EM K2 VERSION > Win key on the left & FULL FAN = FN+1

Share this post


Link to post
Share on other sites
hi,there are bugs in bios 2.17(stock) for clevo p170em?

you can flash?

Sure you can flash it, not aware of bugs just the usual performance limitations...

Share this post


Link to post
Share on other sites

Prema, is there any way to change the temperature at which the turbo fan gets turned on? The turbo fan kicking in at 70 degrees and staying on permanently till the temp drops below 50 degrees is driiving me crazy. And the p151sm1b hits 70 degrees on stock speeds all the time.

Share this post


Link to post
Share on other sites

Any change log for the P370SM yet?

Also does this model include the ability to disable hyper threading? haven't actually received my laptop yet.

And finally just a clarification, I should install the P370SM Bios for my P372SM-S?

Thanks!

Share this post


Link to post
Share on other sites
Any change log for the P370SM yet?

Also does this model include the ability to disable hyper threading? haven't actually received my laptop yet.

And finally just a clarification, I should install the P370SM Bios for my P372SM-S?

Thanks!

Yeah same machine. They just made up that name for showing it ships with dual GPUs...

Share this post


Link to post
Share on other sites
Sure you can flash it, not aware of bugs just the usual performance limitations...

many thanks:friendly_wink:what type performance limitations?

Share this post


Link to post
Share on other sites

我是中国的,哈哈,支持你~!!!!<<<>>> I am a Chinese, ha ha, and support you ~! ! ! !

Share this post


Link to post
Share on other sites
many thanks:friendly_wink:what type performance limitations?

The usual early Turbo throtthle, T2 Timings when 4 RAM are used, limited OC options...that's why we have the Mod for P-EM. ;)

我是中国的,哈哈,支持你~!!!!<<<>>> I am a Chinese, ha ha, and support you ~! ! ! !

欢迎 & 新年好! :) <<<>>> Welcome & Happy New Year!

敬请尝试用英语写作(谷歌翻译)。<<<>>> Please try to write in English (Google Translate).

Share this post


Link to post
Share on other sites

I have EUROCOM Racer 2.0 i7-3920xm 7970m, i hope P150EM will work for me, as well as flashing GPU, cos currently i have shit preformance like 20-30 fps on low in some bf4 maps

Share this post


Link to post
Share on other sites
I have EUROCOM Racer 2.0 i7-3920xm 7970m, i hope P150EM will work for me, as well as flashing GPU, cos currently i have shit preformance like 20-30 fps on low in some bf4 maps

It sure works. The Mod makes a lot of sense for your XM CPU as you will gain longer & higher Turbo as well as Intel XTU Overclocking support.

ENJOY! :)

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Similar Content

    • By 9vul14
      Hey allI, I need help  with modding my BIOS. I was wondering if anyone could help me mod my BIOS to unlock the 'Advanced' tab which I don't have on my InsydeH20 F.52 Rev 5.0 Bios? Thanks so much and I look forward to your response! Laptop: HP Pavilion x360  ba109tx
       
      Specs: 
      i7-8550U
      Nvidia Geforce 940MX
      Intel(R) UHD Graphics 620
      12GB DDR4-2400 SODIMM RAM
      128GB SSD, 1TB HDD
       
      Laptop Product Page: https://support.hp.com/gb-en/document/c05650773
      Vanilla BIOS: https://support.hp.com/sg-en/drivers/selfservice/hp-pavilion-14-ba100-x360-convertible-pc/16851098/model/18161600
    • By Kunal Shrivastava
      Hi guys, I am the proud owner of a Clevo p775dm3-g notebook purchased from azom.systems (authorized Clevo reseller in India, Model rebranded as Azom Legion-17.3 inches). Here are my specs:

      Core i7 7700 (non-K version): undervolted by 110 mv and turbo boost disabled in BIOS- machine uses prema mod BIOS.
      GTX 1080: undervolted by 100 mv on all frequency steps using MSI afterburner voltage/frequency curve editor. clocks are untouched.
      16 GB DDR4: Cant remember clocks.
      1440p 120 Hz screen: No tinkering done to refresh rate.

      CPU has been delidded and repaste has been done on both CPU/GPU dies with gallium based TIM-Coolaboratory liquid ultra if I recall correctly.

      My issue is GPU hitting max temp limit of 90 degrees while playing DOOM and framerate drops from 110 avg to mid 60s-70s with horrible stuttering- this is thermal throttling for sure.

      System was running beautifully after repaste at 86 degrees max/ 77 degrees average at 100 percent fan speed. A month later I decided to see how much further I could push the system and ended up undervolting the CPU/GPU and RAM even further. The RAM undervolting part didnt work as well as I'd hoped, and I ended up resetting the BIOS to undo everything and reapply the previous setting (-110 for CPU with turbo boost disabled.) 

      I noticed that immediately after BIOS reset, both my CPU and GPU temps were 5-10 degrees higher even with the undervolt/underclock applied. Also, I think the fans were a bit louder before I reset the BIOS which leads me to believe that for some reason the fans are now capped at 80% max fan speed. There doesnt seem to be a fan speed selector in the BIOS or anywhere else so I cant say for sure whether this is a fan related issue or something else.Before the reset I could override the BIOS setting and set the fans to 100% by pressing fn+1, could I have done something to that setting after resetting the BIOS ? I dont think I have damaged the CPU or GPU as temps are holding fairly steady at 90-91 degrees and laptop doesn't shut down while gaming.

      If I have overlooked something or if anyone reading this has any solution help would be greatly appreciated.
      All settings/drivers/windows version/app version are exactly the same before and after BIOS reset.
    • By BAKED
      BAKED BIOS FOR TM, KM, DM, P6, P4 SERIES with most menus and options unlocked.
       
      THESE BIOS MODS ARE ONLY FOR PEOPLE WHO KNOW WHAT THEY ARE DOING!
       
       
       
      NEW:
      I'VE BEEN BUSY WITH SOME STUFF PLUS MY SYSTEM HASN'T BEEN WORKING FOR SOME TIME BUT I SHOULD BE ABLE TO CONTINUE MY WORK SOON 
       
      I'M CURRENTLY WORKING ON V3.0 WHICH WILL INCLUDE UPDATED UEFI DRIVERS, MICROCODE BIOS SCREEN SHOT SUPPORT AMISCE SUPPORT(For some models) PLUS MORE. 
      I'M ALSO WORKING ON MODS FOR OTHER MODELS TOO.
      ALL TM, KM AND DM SERIES ARE V2.0 AND NOW HAVE WINDOWS FLASHER INSTEAD, JUST EXTRACT AND RUN FLASH.BAT
       
      WARNING! BIOS FLASHING IS RISKY SO MAKE SURE YOU KNOW WHAT YOU'RE DOING BEFORE PROCEEDING. 
      FLASHING THE WRONG BIOS OR INTERRUPTING THE FLASHING PROCESS WILL BRICK YOUR SYSTEM! 
      USE AT YOUR OWN RISK!
       
      TM, KM AND DM SERIES
       
      P6 AND P4 SERIES
       
      INSTRUCTIONS
        IF YOU LIKE MY WORK FEEL FRE TO BUY ME A COFFEE   ENJOY!
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.