Rikoshet Posted June 29, 2015 Share Posted June 29, 2015 Post the NVFLASH screen that pops that message showing all IDs....(Just hit 'print' button the moment the message prints on screen, then 'CTLR' + 'V' to paste it into a blank 'paint' page.) Do you mean this? Thank you! Link to comment Share on other sites More sharing options...
Guest Posted June 29, 2015 Share Posted June 29, 2015 Yeah looks like that other vBIOS is using the wrong board IDs for GTX970M...Use the old modded NVFLASH version in that thread alongside my vBIOS and .bat files to flash the card. Link to comment Share on other sites More sharing options...
Rikoshet Posted June 29, 2015 Share Posted June 29, 2015 Yeah looks like that other vBIOS is using the wrong board IDs for GTX970M...Use the old modded NVFLASH version in that thread alongside my vBIOS and .bat files to flash the card. Prema, I've found the one you linked here: https://biosmods.wordpress.com/mxm-vbios/ But it gives me this: Thank you! Link to comment Share on other sites More sharing options...
Guest Posted June 29, 2015 Share Posted June 29, 2015 As already said you have to use the NVFLASH from the thread where you got your first vBIOS as it will ignore the wrong ID that you flashed before and let you restore it with my vBIOS. Link to comment Share on other sites More sharing options...
aitoh Posted June 29, 2015 Share Posted June 29, 2015 Hi,I have to W370ST. If I understand it properly I have to download the "W3xxST_33_32_Stock.rar (2.51 MB, 9 views)" one?It seems I have to post 5 times so I cannot download it yet but to make sure I have the right one. After flashing the bios,do I have to setup anything like RAM timing?Thank you in advance, I am very unexperienced in this area. Link to comment Share on other sites More sharing options...
Rikoshet Posted June 29, 2015 Share Posted June 29, 2015 As already said you have to use the NVFLASH from the thread where you got your first vBIOS as it will ignore the wrong ID that you flashed before and let you restore it with my vBIOS.My fault, Prema! Your version did work, I just don't wrote "m" before nvflash!Thank you Prema for your work! Link to comment Share on other sites More sharing options...
Guest Posted June 30, 2015 Share Posted June 30, 2015 @ALL P750ZM-G (g-sync model) just got official support for LG FHD screen, so you are no longer bound to use the 4K Sammy. Hi,I have to W370ST. If I understand it properly I have to download the "W3xxST_33_32_Stock.rar (2.51 MB, 9 views)" one? It seems I have to post 5 times so I cannot download it yet but to make sure I have the right one. After flashing the bios, do I have to setup anything like RAM timing? Thank you in advance, I am very unexperienced in this area. All flashing info is in a README that comes bundled with each Mod. Things like RAM Settings are optional... Link to comment Share on other sites More sharing options...
Timilllo Posted June 30, 2015 Share Posted June 30, 2015 Would you recommend me to change from 1.4 bios to V3? Is the CPU undervolted? I know the new one can't OC Ram but it doesn't matter because i dont oc ram.PD: W110ER model Link to comment Share on other sites More sharing options...
Guest Posted June 30, 2015 Share Posted June 30, 2015 Yeah v3 is much better.I comes in UV (undervolt), OV (overvolt) and UOV flavor (2D undervolted / 3D overvolted). Link to comment Share on other sites More sharing options...
trias10 Posted June 30, 2015 Share Posted June 30, 2015 Hi Prema,Sorry to trouble you, but I think there might be something wrong with the NVFLASH packaged inside P6xxSG_33_34_PM_v1, which is the PremaMod BIOS for the Clevo P650SG. Whenever I try to use this nvflash from an MS-DOS USB stick, I get the error "This program cannot be run in DOS mode". I have the nvflsh32.sys and nvflsh64.sys in the same location as your nvflash.exeAn older version of nvflash on the same USB stick works fine, but it does not support Maxwell cards. I know that when you compile nvflash you can set it for Win GUI or DOS, perhaps the version inside this package was compiled for Win GUI? Or perhaps I'm doing something wrong? The USB stick is a FAT32 MS-DOS stick made with Rufus 2.2Would greatly appreciate any help you can provide. Link to comment Share on other sites More sharing options...
Guest Posted June 30, 2015 Share Posted June 30, 2015 Read the README... Tip: 'its not for DOS'. Link to comment Share on other sites More sharing options...
trias10 Posted June 30, 2015 Share Posted June 30, 2015 Read the README...Tip: 'its not for DOS'. Doh! I'm such an idiot, sorry, it was right there: "HOW-TO: - Double click "update.bat" in Windows and follow on-screen instructions - Be Happy, Enjoy & support our project with a Donation :)" Sorry, am so used to always using nvflash only from an MS-DOS USB. I read before somewhere though that you should never flash vBIOS from Windows though? Is it safe to do in this case because of Optimus, and the fact that the desktop is run by the Intel HD4600, so the Nvidia card is not technically "active"? Link to comment Share on other sites More sharing options...
Guest Posted June 30, 2015 Share Posted June 30, 2015 We have no choice because NVIDIA stopped publishing DOS versions... It is absolutely safe even on non-Optimus systems as long as we make sure that the flash is successful before rebooting (the brief message at the end that asks the user to reboot). In case the flash downs't complete properly simply repeat until it is successful before rebooting the system. ENJOY! Link to comment Share on other sites More sharing options...
Timilllo Posted June 30, 2015 Share Posted June 30, 2015 The GPU is undervolted in UV BIOS but CPU TOO? What do you recommend for eGPU setup?THANKS PREMA! Link to comment Share on other sites More sharing options...
Guest Posted June 30, 2015 Share Posted June 30, 2015 Only GPU. On this model you have to try XTU or Throttlestop to undervolt the CPU. For eGPU you have to ask @Tech Inferno Fan Link to comment Share on other sites More sharing options...
trias10 Posted June 30, 2015 Share Posted June 30, 2015 We have no choice because NVIDIA stopped publishing DOS versions...It is absolutely safe even on non-Optimus systems as long as we make sure that the flash is successful before rebooting (the brief message at the end that asks the user to reboot). In case the flash downs't complete properly simply repeat until it is successful before rebooting the system. ENJOY! Great info, thanks for this! One final question: do you know if I need to have the Nvidia drivers installed in Windows before I run the nvflash to flash the new vBios? Have just done a fresh install of Windows, have not even installed the Nvidia drivers yet, hence my question. Link to comment Share on other sites More sharing options...
Guest Posted June 30, 2015 Share Posted June 30, 2015 not required... Link to comment Share on other sites More sharing options...
joluke@inphtech Posted June 30, 2015 Share Posted June 30, 2015 Hi Prema. Are you currently intending on releasing a more updated mod for P377SM-A? Thank you for your hard work! Enviado do meu SM-P900 através de Tapatalk Link to comment Share on other sites More sharing options...
Utopia-Phoenix Posted July 1, 2015 Share Posted July 1, 2015 Hello Prema! Are you currently intending on releasing a more updated mod for P157SMA? I have a P157SMA with i7 4700MQ and Quadro K2100M, and had flashed your BIOS. 2 Problems. The first one is that I cannot set the CPU turbo time window(in CPU overclocking, in your modded BIOS) to a value greater than 8! This value is 28 by default! The second one is that my machine has the dGPU indicater(beside the HDD/numlock/capslock indicators) always on. I monitored my machine with GPUZ and it said that my quadro K2100M is running at 135 Mhz (idle), instead of being switched off completely! Why is that? Will you update this BIOS and solve these problems? Link to comment Share on other sites More sharing options...
skill7899 Posted July 2, 2015 Share Posted July 2, 2015 what is differnet with EC AND 2nd ECif i run step1 , the computer will reboot? if yes,my computer maybe blank screen,so i would try many times to entry bios。and then i run step2 the screen will xxxx cpu xxxxIf the step1 and step2 must be continuous?can you make a program to flash this bios without reboot this computer , because i run step1 , my computer will reboot, and then it will be blank screen , i can't run the step2 Link to comment Share on other sites More sharing options...
Guest Posted July 3, 2015 Share Posted July 3, 2015 @ALL GTX9xxM user, we need some data: http://forum.techinferno.com/nvidia/6307-%5Balienware%5D-aftermarket-upgrades-driver-support-modded-inf-40.html#post138438 Hi Prema. Are you currently intending on releasing a more updated mod for P377SM-A?... Hello Prema! Are you currently intending on releasing a more updated mod for P157SMA?... YES! can you make a program to flash this bios without reboot this computer , because i run step1 , my computer will reboot, and then it will be blank screen , i can't run the step2 Try this: link removed after test was completed Double click step1 in Windows (the system will automatically reboot) Run step2 in DOS Link to comment Share on other sites More sharing options...
mmomaker Posted July 3, 2015 Share Posted July 3, 2015 Having issue with my system, it seems to shut down every 30 minutes. I flash my bios and it seems to fix the problem but after so many days let say 3 weeks it starts to happen again. I have to reflash my bios every time what is going on Link to comment Share on other sites More sharing options...
Guest Posted July 4, 2015 Share Posted July 4, 2015 Having issue with my system, it seems to shut down every 30 minutes. I flash my bios and it seems to fix the problem but after so many days let say 3 weeks it starts to happen again. I have to reflash my bios every time what is going onRun Memtest...if it throws out errors use the T2 version of the Mod. Link to comment Share on other sites More sharing options...
Czarny_PLone Posted July 4, 2015 Share Posted July 4, 2015 Good morning Prema Stock bios 310 EC 309 for P370SM-A is sensational. The laptop is quiet, cool and very efficient http://www.4shared.com/download/UEWT79Pjba/CINEBENCH_R15.png?lgfp=3000 Also you plan to update the Bios Mod P370SM-A ? Thank you very much for your efforts and hard work. Link to comment Share on other sites More sharing options...
Guest Posted July 4, 2015 Share Posted July 4, 2015 Prema Mod Partner Shops have the new BIOS Mods since a couple weeks...next time maybe purchase from one of them...public releases are always a bit later....which is sooooooon-ish Link to comment Share on other sites More sharing options...
Recommended Posts