Jump to content
EwinRacing Flash Series Gaming Chairs
n1smo

Y500 Disassembled (Pictures)

Recommended Posts

Great additions to the laptop. I am just wondering if it is possible to eliminate the heat problem by a larger heatsink and if a larger heatsink will fit?

The fan with increased airflow will do the trick. Larger diameter but the same height. Suggestions of certain type, anybody?

Share this post


Link to post
Share on other sites
The fan with increased airflow will do the trick. Larger diameter but the same height. Suggestions of certain type, anybody?

Share this post


Link to post
Share on other sites
Has anyone checked if 650m and 750m has the same hestsink. If 750m has better heatsink maybe you could use the other heatsink?

It's the exact same.

Share this post


Link to post
Share on other sites
If the issue comes back, like it did for me after 2 weeks. Here is the final solution.

For me, it was a grounding issue, and I think it is the same with the keyboard. The touchpad feels great after relocating the silver tape. Very responsive, and I have the multi gesture stuff enabled, everything works good.

The red circle indicates where I've move the silver tape too, had to angle it a little but now it is grounded directly onto the top aluminum case as opposed to the painted plastic (conductive?). I've been trying to get it to fail ever since and so far it is working perfectly.

http://i39.photobucket.com/albums/e156/n1smo/Lenovo%20Y500/DSC_0364_newgroundingpoint_zpsec25ebe0.jpg

So, I posted that in the Lenovo support forum but basically, I just relocated the silver tape and it's been working great. The touchpad has never felt this good.

- - - Updated - - -

This is the Elan touchpad. It was one of the earlier builds, got mine back in November.

In the picture you have of the silver tape, you are saying you moved the silver tape from the green circle to where the red circle is? I assume you used the silver tape because it needs to conduct?

Share this post


Link to post
Share on other sites

Hello guys,

can someone tell me, where i can find a lenovo y500 ultrabay fan. I live in germany. Someone know a shop, which shipps to germany? I've disassembled my notebook, because i thought it is dusty. Tha't wasn't so i try to find a possibility to cool down my laptop. Thanks for your answers!

Share this post


Link to post
Share on other sites
Hello guys,

can someone tell me, where i can find a lenovo y500 ultrabay fan. I live in germany. Someone know a shop, which shipps to germany? I've disassembled my notebook, because i thought it is dusty. Tha't wasn't so i try to find a possibility to cool down my laptop. Thanks for your answers!

Share this post


Link to post
Share on other sites

Thank you for posting the y500...does anyone with a y400 have a similar pictures? Or is the y500 almost identical and y400 pics are unnecessary? Thanks!

Share this post


Link to post
Share on other sites

Hey, thanks for the pics. SO what did You do to fix the touch pad? Did You replace it? I guess You had the old version of the touchpad?

Share this post


Link to post
Share on other sites

on a desktop I had 2-4 degree improvment in temps after changing thermal paste, I think that it is too much effort to change it in notebook unless you have to dissasamble it in other reason

Share this post


Link to post
Share on other sites
The Ultrabay fan module doesn't lower temperatures at all.

Agreed with that. Some users in other forum said that the Ultrabay fan instead sucked the cool air that is needed by the main fan. It doesn't cool anything, as the exhaust air are not even hot....

Share this post


Link to post
Share on other sites
on a desktop I had 2-4 degree improvment in temps after changing thermal paste, I think that it is too much effort to change it in notebook unless you have to dissasamble it in other reason
Desktops are less likely to suffer overheating issues, especially compared to laptop with a subpar cooling design like the Y500. Repasting my Y500 dropped CPU temp by 15C and GPU temp by 10C. It meant not having to choose between running the CPU at full speed yet close to thermal shutdown all the time or throttling it so that it wouldn't overheat.

Share this post


Link to post
Share on other sites

Awesome pics and thank you for the link to the Y400 / Y500 disassembly video! I've been wanting to go through my Y510P and redo all of the thermal paste, but have been a bit gun-shy without a guide :-)

Share this post


Link to post
Share on other sites

Would I have to disassemble the entire laptop if I wanted to get to the heatsink?

Share this post


Link to post
Share on other sites
I know its of of place but can i upgrade to Gt750>?

I think you'll need more explanation...

Share this post


Link to post
Share on other sites

I wish I would have read this earlier. I just removed the back of mine less than 2 hours ago before reading this post and broke off the top left plastic tab. Great instructions though!

Share this post


Link to post
Share on other sites

Once have i also disassembled my y500 'cause the left speaker above 70 percent of volume gave disturbing resonant with the top cover at 400~600 Hz. As it turns out, this is due to the power button. I just had to fix it some special glue, and now i can enjoy the full volume! :)

Share this post


Link to post
Share on other sites

Caveat for those who disassemble their Y500s- when you pry off the keyboard make sure not to pry the superficial keyboard cover, but put pressure on the deeper part instead. Otherwise the plastic that goes around the keys gets its tabs broken and isn't as locked in once reassembled.

Share this post


Link to post
Share on other sites

Hello.I have the following issue with my y500 -

And before i disassemble my laptop I want to ask if there is anything else except the 4 pin connector for the speakers that may be causing my problem.I hope that i can fix this problem by myself :)

Thank you.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By sam@83
      Hello !
      I tried a tutorial on the forum to remove the supervisor password on a X260 thinkpad but the winbond 25Q128FVPQ chip is not recognized with the programmer CH341A and ASprogramer (does not detect automatically and not manually). Plugged into the motherboard with a soic8.

      Can you help me with detection?
      Can I find the password with the software or do I have to write it?
       
      Thank you so much !!!
    • By Cubitci
      To install the unlocked bios, I prepared and booted a freedos usb. I start the installation by typing flash.bat but every time I get the following error: Error 28: Protected Range Registers are currently set by BIOS, preventing flash Access. Please contact the target System BIOS vendor for an option to disable Protected Range Registers.
      How can i solve this problem ?
    • By arifhsn
      https://www.sendspace.com/file/0zjk9f
       
      please help i can't access my g5070's advanced menu
    • By raqall
      Hi!

      I would love to have my BIOS modded to disable the wireless whitelist.
      I tried to do it myself (dump BIOS from chip, disassemble, locate the reference to the error message "Unauthorized Wireless network card is plugged in..." memory address and modify the condition in the binary file so not to "land" in the infinite loop) but I couldn't dig to anything meaningful I could easily change.

      Laptop: Lenovo ThinkPad S440 (TYPE 20BB-S00400)
      BIOS version: 73ET71WW (1.71)
      Original WiFi/BT card: Intel Wireless-N 7260 (7260HMW BN) (vendor: 0x8086, device: 0x08B2, subdevice: 0x4262)
      Target WiFi/BT card: Broadcom BCM94352HMB (I haven't received it yet, waiting for delivery)

      Manufacturer BIOS download: bootable ISO, updater for Windows
      My BIOS dump (using CH341A SPI Programmer under Linux): http://www.mediafire.com/file/mn0gfr9ext7yqrn/S440_73ET71WW.bin/file
       
      Thanks!
    • By Klem
      In this thread you can post your requests for Lenovo Y50-70, Lenovo Y70-70, Lenovo Z50-70, Lenovo Z70-70, Lenovo G50-70, Lenovo G70-70.
      If someone want upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, or unlocked vbios for overclock NVIDIA card, then you can post your request in this thread. Also, if you have a problem with fan pulsating/clicking on any modified bios then you can post your request in this thread.
       
      The flashing procedure include two steps:
      1.  Flash main system bios.
      2.  Flash EC firmware.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.