Bios Release Version – v2.0.0
Updated or Modded Items:
A11 UNLOCKED BIOS FOR m18Xr2 (UNLOCKED BY SVL7 AND FULL CREDIT GOES TO HIM FOR UNLOCKING!)
SVL7 Also created the PRR2.EXE tool that allows you to flash the new bios by unlocking it. (FULL CREDIT GOES TO HIM FOR THAT FILE PRR2.EXE)
Here are ALL the things I've added, modded, and enhanced on this bios -
I've added FULL LEGACY SUPPORT ON THIS BIOS with ONE or TWO CARDS (SLI). You can FINALLY use Win 7 OS on your machine and run the 900 series GPU's!
This is a MAJOR breakthrough!
LEGACY SUPPORT Confirmed. Works with 900 series GPu's in single OR SLI formation Updated the Intel RST Legacy to v188.8.131.526 (Supports TRIM in RAID0 - CONFIRMED) Updated Intel RST UEFI to v184.108.40.2066 (Supports TRIM in RAID0 - CONFIRMED) Updated the ONBOARD Video Card for the HD3xxx to v2171 - FROM v2132 Updated ONBOARD Video Card for the HD4xxx to v2171 - FROM v2132 Updated the LAN Firmware & PXE Boot from 220.127.116.11 to v18.104.22.168 ADDED NvMe Support for m18xr2 ADDED M.2 support for m18xr2 Updated CPU Microcode to v29 for the 2900 CPU's Updated CPU Microcode to v1c for the 3900 CPU's Updated GOP Driver for Intel Sandy Bridge CPU Updated GOP Driver for Intel Ivy Bridge CPU Updated MAIN GOP Policy module for the m18xR2 Eliminated some code that wasn't used in the m18xR2 Updated CSM Module (v2) Streamline some coding to make mod(s) run a little more efficiently (v2) Added FPARTS.TXT to rar file in v2. (I had forgot to add it in v1) v2.5 to be released shortly. I've updated a few more modules that I didn't realize could be updated. (It's only 3 modules, but it's still an update!) It should be released in about a week. Hope this helps ya'll!
Instructions to flash:
Use a flash drive to create a boot disk into dos Unzip ALL files into the root of the flash drive (flash.bat, r2final.bin, fpt.exe, flash.bat, prr2.exe, fparts.txt,m18r2.hdr, m18r2.hdr.bin, readmefirst.txt) BOOT INTO DOS – Note, that when you set the bios to legacy in order to boot into dos, you MAY have to reinstall OS! (Just be prepared to reinstall no matter what) Once you boot into dos, run the file flash.bat It will unlock your bios (THANKS TO SVL7’s BIOS UNLOCKING TOOL – ALL CREDIT TO HIM FOR THIS TOOL!) Let it flash… Reboot your pc, and enjoy the MASSIVE updates!
Be on the lookout as I do plan to release newer version with more updates in the future. However, it wont be for at least a few weeks as I'm now working on legacy support for the m17xR4 and several other systems. So please be patient!
Thread link for more information and discussion:
Files contained in this archive:
FTP-DOS.zip prr2.zip M18x R2 - BIOS A03 'unlocked.zip M18x R2 - BIOS A08 'unlocked.zip M18x_R2_-_BIOS_A08_-_[unlocked]_-_[IRST 22.214.171.1242].zip M18x_R2_BIOS_A03_-_[unlocked] - [IRST 126.96.36.1992].zip M18x_R2_BIOS_A09_-_[unlocked].zip [FPT]-M18x_R2_BIOS_A09_-_[unlocked].zip [FPT]-M18x_R2_BIOS_A10_-_[unlocked]_V2.zip M18x_R2_-_BIOS_A08_-_[unlocked].zip M18x_R2_BIOS_A03_-_[unlocked].zip
For information on how to use the files in this archive, see here:
My donation link in case you want to buy me a beer
Help me Tech Inferno, you're my only hope.
Ok so firstly, apologies for yet another 8 beeps thread. I must have read 100 of them over the last week. I feel like I'm missing something obvious, but I'm totally burned out after days of working on this so would appreciate some outside perspective.
I live in the UK, so I've avoided buying a 980m to upgrade my 660 for years to due the price/import tax etc. I finally found a good priced 980m on Ebay a few weeks ago so I thought why not give my trusty 18x r2 a few extra years of life.
I ordered the 100w heatsink, x bracket etc from Eurocom at the same time and everything arrived on the same day.
Here's what I've done so far in the last 7 days:
-Flashed unlocked A11 BIOS (I rolled back to Dell A11 first)
-Removed 660m and installed 980m
-With BIOS in Legacy, Installed Windows 7 on a new SSD with BIOS set to IGFX
-Tried to switch to PEG but got 8 beeps so reset CMOS battery
-Switched to SG and booted to Windows. 980m detected as default hardware. Installed 980m Driver from Eurocom and restarted. Device manager shows 980m working normally along with HD Graphics 4000. Tried PEG again but still got 8 beeps
-Reset battery, booted to Windows and disabled the 980m in Device Manager
-Flashed VBIOS from here (I read that the dell VBIOS doesn't work well so tried Clevo one first, but I've since tried both and a few others)
-Re enabled 980m and restarted Laptop still in Legacy SG.
-Tried to test a game but they only want to use HD Graphics 4000. When I try to open NVIDIA Control Panel and change some settings I get a blue screen and have to restart.
-Tried PEG again, still 8 beeps
I've tried many combinations of drivers, VBIOS and BIOS settings over the last week but the result is mostly the same. I get 8 beeps in PEG. I thought perhaps the seller had sent me a G-sync version as I have read these don't play well with PEG, but I checked the hardware ID (PCI\VEN_10DE&DEV_13D7&SUBSYS_05501028&REV_A1) and what I've read seems to indicate this is the Non G-Sync card.
I got the 980m rather than the 1060 after reading the forums as I saw so many success stories I figured it would be the safer option.
I understand this laptop is basically dead to most of you now, but if any techsperts are around and could give me some other things to try I'd greatly appreciate it.
I have installed my 980M on myR2, Got the 8 Beeps, I thought with the A12 BIOS and Windows 10 it should have worked. Oh well, going to tear it back down and put the 675M's back in. Ijust got promoted and am downloading the A11 unlocked BIOS . So, Next teardown I am going to be completely ready. I just want to get this in and see if I can get it working before my return window passes. I have posted a few places here, and on Notebook Review on several threads about this stuff, and have received one response. Is this site still active? Do I need a modified driver still, all that stuff looks really old, 2013-2016 type stuff. I need to know about 2018. I have read that Nvidia added support for the maxwell in m18x r2. Am I wrong? Can someone offer advice? I have read that this thing should have been plug and play with windows 10 on Eurocom, Do I just need their driver? PLEASE HELP!!! Thank You!!!